Yakovlev Yak-18

Yak-18
A Polish Yakovlev Yak-18 in flight
Role Training aircraft
Manufacturer Yakovlev
First flight 1946
Introduction 1946
Status in limited service
Primary users Soviet Air Force
DOSAAF
People's Liberation Army Air Force
Polish Air Force

The Yakovlev Yak-18 (Russian: Яковлев Як-18; NATO reporting name Max) was a Soviet tandem two-seat military primary trainer aircraft. Originally powered by one 119 kW (160 hp) Shvetsov M-11FR-1 radial piston engine, it entered service in 1946. It is also produced in China as the Nanchang CJ-5.

Design and development

A member of the second generation of Russian aircraft designers, and best known for fighter designs, Alexander Sergeyevich Yakovlev always retained a light aircraft design section. In May 1945, Yakovlev initiated design of the Yak-18 two-seat primary trainer. He designed it to replace the earlier Yakovlev UT-2 and Yak-5 in service with the Soviet Air Forces and DOSAAF (Voluntary Society for Collaboration with the Army, Air Force and Navy, which sponsored aero clubs throughout the USSR). In 1944, an advanced version of the UT-2 had been built and featured an enclosed canopy and fixed landing gear which bears a striking resemblance to the new Yak-18. The new aircraft flew a year later, powered by a 119 kW (160 hp) Shvetsov M-11 five-cylinder radial engine and featuring pneumatically operated retractable main landing gear and a fixed tailwheel. It entered service as a trainer later that year and was built by Yakovlev up until 1956. Examples were exported to China in kit form beginning in 1950. The Chinese began producing license built copies in 1954 with the designation CJ-5.

The Yak 18's greatest claim to fame is its use as a night bomber by the North Korean Air Force during the Korean War. The aircraft were modified with bomb racks on the wing center section and flew over UN troop locations at night to drop bombs and harass UN forces. The single most successful attack of the North Korean aviation during the war was destroying of a fuel dump with nearly 5.5 million gallons of fuel in Inchon area in June 1953 by 4 or 5 Yak-18s.[1] The five-cylinder engine reminded many of the US troops of the sound made by early gasoline powered washing machines earning them the name: "Washing Machine Charlie". The name "Bed Check Charlie" was also used for these night intruders. The Yak-18s along with Polikarpov Po-2s became quite a nuisance until US night fighters began shooting them down.

Other claims to fame for the Yak-18 are an international speed record for class in 1951 as well as being the aircraft used for initial flight training by Yuri Gagarin (1st human in space) and Ken Rowe (No Kum-Sok: defected with a Mig-15 during the Korean War). Later, as the need for conventional landing gear trainers abated Yakovlev re-designed the Yak-18 with retractable tricycle landng gear and an Ivchenko AI-14RF radial, 224 kW (300 hp) and was designated the Yak-18A. The design proved exceptionally easy to build and maintain.

There are an estimated 40 original Yak-18s in existence worldwide. Five are currently flyable in the USA, three are flyable in Europe, and the Chinese Air Force has one flyable with several other airframes in storage. Approximately four other aircraft worldwide are currently being restored for flight. Many are found in major aviation museums worldwide including the National Air and Space Museum in the USA. The CJ-6a, produced in China, is sometimes quoted as a variant but is a completely different aircraft designed in China by Bushi Cheng and built by Nanchang Aircraft Company.

Operational history

Aerobatic formation in YAK-18's
Soviet Yak-18PM single-seat aerobatic aircraft competing in the 1970 World Aerobatic Championship at RAF Hullavington, England, in 1970

The Yak-18 became the standard trainer for Air Force flying schools and DOSAAF, is in wide use in China, and in many other countries.

Photographs showing Kim Jong-Un visiting a North Korean Air Force base in March 2014 suggest that the North Koreans may still maintain original Yak-18's or CJ-5's in a bombing role.[2]

Variants

Polish Air Force Yak-18 in the Polish Aviation Museum
Yak-18A
Yak-18, commemorated on the 1986 USSR stamp
Yak-18
The original production version. Retractable main undercarriage, fixed tailwheel.
Yak-18U
This version was built in small numbers. It had retractable tricycle landing gear.
Yak-18A
Cleaned up version of the Yak-18U, powered by a 194 kW (260 hp) Ivchenko AI-14 FR engine. Built in large numbers.
Yak-18P (NATO reporting name Mouse)
Single-seat aerobatic aircraft for use by flying clubs. Adaptation of Yak-18 two-seat trainer.
Yak-18PM
Single-seat aerobatic aircraft with retractable tricycle landing gear.
Yak-18PS
Aerobatic aircraft with retractable tailwheel.
Hongzhuan-501 (Red Craftsman)
Probable original designation for early CJ-5 production aircraft.
Nanchang CJ-5
The Yak-18 was built under licence in China as the CJ-5 for use by the PLAAF, PLANAF and civilian flying clubs. 379 CJ-5's had been built when production ended in 1958.

Similar model designation

The Yak-18T was developed as an Aeroflot training aircraft and also as a light passenger transport aircraft, with a 4-seat cabin for one pilot and three passengers. It is not a variant of the Yak-18 as it has very little in common, and was designed from scratch 20 years later.

Operators

Yak-18 operators
 Afghanistan
 Albania
 Algeria
 Armenia
 Austria
 Bulgaria
 Cambodia
 China
 Czechoslovakia
 East Germany
 Egypt
 Guinea
 Hungary
 Iraq
 Khmer Republic
 Laos
 Mali
2
 Mongolia
 North Korea
 Poland
 Romania
 Somalia
 Soviet Union
 Syria
 Transnistria
 Turkmenistan
 Vietnam
 Yemen
 Zambia

Specifications (Yak-18A)

Yak-18

General characteristics

Performance

See also

Related development
Aircraft of comparable role, configuration and era

References

The initial version of this article was based on material from aviation.ru. It has been released under the GFDL by the copyright holder.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.