X Band Satellite Communication

X band or SHF Satellite Communication is widely used by military forces for beyond line of sight communications. X band is used because it provides a compromise between the characteristics of different frequency bands which is particularly suited to the needs of military users. The characteristics include interference and rain resilience, terminal size, data rates, remote coverage and whether it is reserved for governmental use.

Characteristics of the SHF frequency band

Frequency

X Band Satellite Communication operates in the part of the X band or Super High Frequency (SHF) spectrum which is designated by the International Telecommunication Union (ITU) for satellite communication, which is those frequencies in the range 7.25 GHz to 7.75 GHz (Space to Earth) and 7.9 GHz to 8.4 GHz (Earth to Space).[1] The ITU Frequency allocation defines the primary use of this spectrum as Fixed satellite service (FSS) and a portion to Mobile Satellite Services (MSS), primarily used for ship based satellite communications. UK Frequency Allocation Table (UK FAT)[2] along with other NATO countries and some other countries’ (but not all) national frequency allocations tables, have an additional note detailing the primary allocation for government use. It is important to note that the allocation of these frequencies and services is for government use and not, as commonly stated, military use. The ITU and the UK Ofcom considers military use as just one part of government use.

Rain resilience

X band is below those frequencies which are severely affected by Rain Fade, therefore X band provides extremely good rain resilience unlike higher frequencies such as Ku or Ka which are also used for satellite communication. This allows extremely high link availability, in some cases as high as 99.9%

>4° separation between satellites

X band satellites typically have at least 4° separation between satellites, therefore there is less chance of adjacent satellite interference (ASI) and higher power density carriers allowed.[3]

Terminal size v data rates

As with any satellite communication link, the data rate that can be achieved with a terminal is dependent on the gain of the parabolic antenna. Antenna gain increases with the square of the ratio of aperture width to wavelength. Therefore for a fixed antenna size the gain, and hence the achievable data rate increases with frequency. Thus X band provides data rates which are much higher than can be achieved with UHF, L band, or C band. The achievable data rates will approach those achievable with Ku band, the exact values will depend on other link parameters (satellite power, link margin, modulation scheme, etc.).

Therefore X band provides a good compromise between terminal size and data rates while maintaining resilience to rain fade. Data rates of 10Mbit/s are achievable to a 45 cm antenna without interfering with adjacent satellites. National Frequency Planning Group on behalf of the Committee on UK Spectrum Strategy

Remote and maritime coverage

X band spot beams typically have a diameter of 1000 km or more. This is the result of the frequency and the size of Parabolic antenna which can be accommodated inside satellite launch vehicles. This means that a single beam is able to be steered to cover an entire region of interest. X band satellites also have an earth cover or global beam providing coverage of the entire planet that is visible from the satellite. This is in contrast to satellites in commercial bands which typically provide fixed beams for areas of high density of users. Therefore X band satellites are able to support users in remote areas with little or no infrastructure and in mid ocean away from land and shipping lanes.

Characteristics of SHF Satcom systems

SHF Satcom systems often possess features designed to meet the needs of military users and to counter threats to the system. Features include

Components of SHF Satcom systems

Like other Satellite Communications X band satellite communication systems comprise the following segments Satellite space segment: the satellite which comprises the platform and the payload

Satellite communication systems operating at X band

Skynet

The Skynet fleet of satellites are owned and operated by Airbus Defence & Space who hold a long term concession for beyond line of sight communications with the UK MOD. The includes four high performance Skynet 5 satellites with 160W TWTAs providing up to 8W/MHz and an active receive antenna capable of creating multiple uplink beam patterns. The Skynet fleet also includes older Skynet 4 satellites which are beyond their original design life and in inclined orbits, these orbits enable them to provide communications to arctic and Antarctic regions. In addition to SHF capacity the Skynet satellites also have UHF capacity.[4]

Wideband Global SATCOM system (WGS)

The WGS system is a constellation of military communications satellites procured by the U.S. Air Force MILSATCOM Systems Directorate at Los Angeles Air Force Base (AFB). Each WGS satellite provides capacity in both the X and Ka frequency bands. Each WGS satellite is digitally channelized and transponded.[5] International partners participating on the program are Australia, Canada, Denmark, Luxembourg, The Netherlands and New Zealand.[6]

XTAR-EUR

The XTAR-EUR satellite is owned and operated by XTAR LLC. It was launched in February 2005 and is positioned at 29 degrees east. XTAR-EUR has 100W, 72 MHz transponders[7]

Spainsat

SpainSat is owned by Hisdesat. SpainSat was launched in March 2006 and is positioned at 29 degrees west. Spainsat has an X-Band payload with 100W, 72 MHz transponders. It also has Ka band capacity.[8]

Sicral

SICRAL (Sistema Italiano per Comunicazioni Riservate ed Allarmi) is Italy’s satellite system for military communications. The SICRAL 1 satellite was launched in 2001 and the SICRAL 1B satellite was launched in 2009.[9]

Syracuse

Syracuse III (système de radiocommunications utilisant un satellite) is the military satellite communication system of the French ministry of Defence. Syracuse 3A was launched in 2005 and Syracuse 3B was launched in 2006.[10]

Anik G1

Anik G1 was launched in April 2013, and includes a 3-transponder, global-beam X-band payload, operating from 107.3°W.[11]

DC-MS Series 2

DC-MS Series 2 consists of 2 triple-transponder global-beam X-band payload, operated by Delta Communications. DC-MS Series 2 was launched in January 2014.

NATO SATCOM Post-2000

The NATO X Band satellite system consists of a NATO owned ground segment with capacity leased from a consortium formed by the British, French and Italian governments.[12]

See also

References

  1. "ITU Radio Regulations 2012" (PDF). Retrieved 18 June 2014.
  2. National Frequency Planning Group on behalf of the Committee on UK Spectrum Strategy. "United Kingdom Frequency Allocation Table Issue 17" (PDF). www.ofcom.org.uk. Retrieved 19 June 2014.
  3. "Commercial X-Band: The Technical + Operational Advantages". Retrieved 18 June 2014.
  4. "Skynet Data Sheet" (PDF). Retrieved 18 June 2014.
  5. "Boeing WGS Factsheet". Archived from the original on June 13, 2014. Retrieved 18 June 2014.
  6. "Los Angeles Airforce Base WGS Factsheet". Archived from the original on March 25, 2014. Retrieved 18 June 2014.
  7. "XTAR-EUR Data sheet" (PDF). Retrieved 18 June 2014.
  8. "Spainsat data sheet". Retrieved 18 June 2014.
  9. "Italian MOD announcement of Sicral 1B launch (Lancio del Satellite SICRAL 1B)". Retrieved 18 June 2014.
  10. "Syracuse III". Archived from the original on March 6, 2014. Retrieved 18 June 2014.
  11. "Anik G1 Datasheet" (PDF). Retrieved 18 June 2014.
  12. "SATCOM Post-2000". Retrieved 18 June 2014.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.