Powered exoskeleton

The exhibit "future soldier", designed by the United States Army

A powered exoskeleton (also known as powered armor, power armor, exoframe, hardsuit, or exosuit) is a wearable mobile machine that is powered by a system of electric motors, pneumatics, levers, hydraulics, or a combination of technologies that allow for limb movement with increased strength and endurance.

History

The earliest exoskeleton-like device was a set of walking, jumping and running assisted apparatus developed in 1890 by a Russian named Nicholas Yagin. As a unit, the apparatus used compressed gas bags to store energy that would assist with movements, although it was passive in operation and required human power.[1] In 1917, United States inventor Leslie C. Kelley developed what he called a pedomotor, which operated on steam power with artificial ligaments acting in parallel to the wearers movements.[2] With the pedomotor, energy could be generated apart from the user.

The first true exoskeleton in the sense of being a mobile machine integrated with human movements was co-developed by General Electric and the United States Armed Forces in the 1960s. The suit was named Hardiman, and made lifting 110 kilograms (250 lb) feel like lifting 4.5 kilograms (10 lb). Powered by hydraulics and electricity, the suit allowed the wearer to amplify their strength by a factor of 25, so that lifting 25 kilograms was as easy as lifting one kilogram without the suit. A feature dubbed force feedback enabled the wearer to feel the forces and objects being manipulated.

While the general idea sounded somewhat promising, the actual Hardiman had major limitations.[3] It was impractical, due to its 680-kilogram (1,500 lb) weight. Another issue was that it is a master-slave system, where the operator is in a master suit, which, in turn, is inside the slave suit that responds to the master and handles the workload. This multiple physical layer type of operation may work fine, but responds slower than a single physical layer. When the goal is physical enhancement, response time matters. Its slow walking speed of 0.76 metres per second (2.5 ft/s) further limited practical uses. The project was not successful. Any attempt to use the full exoskeleton resulted in a violent uncontrolled motion, and as a result it was never tested with a human inside. Further research concentrated on one arm. Although it could lift its specified load of 340 kg (750 lb), it weighed three quarters of a ton, just over twice the liftable load. Without getting all the components to work together, the practical uses for the Hardiman project were limited.[4]

The beginning of the development of humanoid robotics coincided with the beginning of the development of the world's first active exoskeletons at the Mihailo Pupin Institute in 1969, under the guidance of Prof. Vukobratovic. Legged locomotion systems were developed first. Also, the first theory of these systems was developed in the same institute, in the frame of active exoskeletons. Hence, it can be said that active exoskeletons were the predecessors of the modern high-performance humanoid robots. The present-day active exoskeletons are developed as the systems for enhancing capabilities of the natural human skeletal system. The most successful version of an active exoskeleton for rehabilitation of paraplegics and similar disabled persons, pneumatically powered and electronically programmed was realized and tested at Belgrade Orthopedic Clinic in 1972. One specimen was delivered to the Central Institute for Traumatology and Orthopedy, Moscow in the frame of the USSR-Yugoslav inter-state scientific cooperation. From 1991 the exoskeleton belongs to the basic fund of Polytechnic Museum (Moscow) and State Museum Fund of Russian Federation. It is displayed in the frame of the Museum's exposition dedicated to the development of automation and cybernetics.[5]

Exoskeleton being developed by DARPA

Los Alamos Laboratories worked on an exoskeleton project in the 1960s called Project Pitman. In 1986, an exoskeleton prototype called the LIFESUIT was created by Monty Reed, a United States Army Ranger who had broken his back in a parachute accident.[6] While recovering in the hospital, he read Robert Heinlein's Starship Troopers and from Heinlein's description of Mobile Infantry Power Suits, he designed the LIFESUIT, and wrote letters to the military about his plans for the LIFESUIT. In 2001 LIFESUIT One (LSI) was built. In 2003 LS6 was able to record and play back a human gait. In 2005 LS12 was worn in a foot race known as the Saint Patrick's' Day Dash in Seattle, Washington. Monty Reed and LIFESUIT XII set the Land Speed Distance Record for walking in robot suits. LS12 completed the 4.8-kilometre (3 mi) race in 90 minutes. The current LIFESUIT prototype 14 can walk 1.6 km (1 mi) on a full charge and lift 92 kg (203 lb) for the wearer.

In January 2007, Newsweek magazine reported that the Pentagon had granted development funds to the University of Texas at Dallas' nanotechnologist Ray Baughman to develop military-grade artificial electroactive polymers. These electrically contractive fibers are intended to increase the strength-to-weight ratio of movement systems in military powered armor.[7]

Applications

Steve Jurvetson with a Hybrid Assistive Limb powered exoskeleton suit, commercially available in Japan.

Medical

One of the main applications would be medical — improving the quality of life of persons who have, for example, lost the use of their legs, by providing assistive technology to enable system-assisted walking or restoration of other motor controls lost due to illness or accidental injury.

Another area of application could be medical care, nursing in particular. Faced with the impending shortage of medical professionals and the increasing number of people in elderly care, several teams of Japanese engineers have developed exoskeletons designed to help nurses lift and carry patients.

Exoskeletons can also be applied in the area of rehabilitation of stroke or spinal cord injury patients. Such exoskeletons are sometimes also called Step Rehabilitation Robots. An exoskeleton could reduce the number of therapists needed by allowing even the most impaired patient to be trained by one therapist, whereas several are currently needed. Also training would be more uniform, easier to analyze retrospectively and can be specifically customized for each patient. At this time there are several projects designing training aids for rehabilitation centers (LOPES exoskeleton, Lokomat, Modular robotic exoskeleton UniExo, CAPIO and the gait trainer, HAL 5.)[8][9]

Rehabilitation exoskeletons can be configured such that they provide a minimal amount of assistance. In this way, they can electronically maximize the patient's efforts when possible and thus provide a more rigorous, targeted therapy session. Ekso Bionics of Richmond California has developed the Ekso GT, which incorporates this ability: "The SmartAssist software allows physical therapists to vary the support of the device for each leg independently - from full power to free walking - and thereby meet the specific needs of patients. This capability enables the Ekso GT to rehabilitate a larger range of patients, from those too weak to walk to those who are nearly independent." The Ekso GT is also the first exoskeleton to be approved by the FDA for stroke patients.

German Research Centre for Artificial Intelligence developed two general purpose powered exoskeletons CAPIO and VI-Bot.[9][10] They also considered human force sensitivities in the design and operation phases.[11] Teleoperation and power amplification were said to be the first applications, but after recent technological advances the range of application fields is said to have widened. Increasing recognition from the scientific community means that this technology is now employed in telemanipulation, man-amplification, neuromotor control research and rehabilitation, and to assist with impaired human motor control (Wearable Robots: Biomechatronic Exoskeletons).[12]

The medical field is another prime area for exoskeleton technology, where it can be used for enhanced precision during surgery, or as an assist to allow nurses to move heavy patients.[13]

Military

There are an increasing amount of applications for an exoskeleton, such as decreased fatigue and increased productivity whilst unloading supplies or enabling a soldier to carry heavy objects (80–300 kg) while running or climbing stairs. Not only could a soldier potentially carry more weight, they could presumably wield heavier armor and weapons while lowering their metabolic rate or maintaining the same rate with more carry capacity. Some models use a hydraulic system controlled by an on-board computer. They could be powered by an internal combustion engine, batteries or potentially fuel cells.

Civilian

In civilian areas, exoskeletons could be used to help firefighters and other rescue workers survive dangerous environments.[14]

Products

Current products

Under development

Limitations and design issues

Engineers of powered exoskeletons face a number of large technological challenges to build a suit that is capable of quick and agile movements, yet is also safe to operate without extensive training.

Power supply

One of the largest problems facing engineers and designers of powered exoskeletons is the power supply.[33] There are currently few power sources of sufficient energy density to sustain a full-body powered exoskeleton for more than a few hours.

Non-rechargeable primary cells tend to have more energy density and store it longer than rechargeable secondary cells, but then replacement cells must be transported into the field for use when the primary cells are depleted, of which may be a special and uncommon type. Rechargeable cells can be reused, but may require transporting a charging system into the field, which either must recharge rapidly or the depleted cells need to be able to be swapped out in the field, to be replaced with cells that have been slowly charging.[33]

Further, chemical reactions can occur between substances used in rechargeable batteries, such as lithium, with atmospheric oxygen in the event of a battery being damaged, resulting in fire or explosion. Recent research by John Goodenough and a team at the University of Texas at Austin into glass battery technology is highly applicable to exoskeletal power research, as these batteries benefit from a solid-state electrolyte and improved energy density compared to traditional rechargeable cells.[34]

Internal combustion engine power supplies offer high energy output, but they also typically idle, or continue to operate at a low power level sufficient to keep the engine running, when not actively in use, which continuously consumes fuel. Battery-based power sources are better at providing instantaneous and modulated power; stored chemical energy is conserved when load requirements cease. Engines that do not idle are possible, but require energy storage for a starting system capable of rapidly accelerating the engine to full operating speed, and the engine must be extremely reliable and never fail to begin running immediately.

Small and lightweight engines typically must operate at high speed to extract sufficient energy from a small engine cylinder volume, which both can be difficult to silence and induces vibrations into the overall system. Internal combustion engines can also get extremely hot, which may require additional weight from cooling systems or heat shielding.

Electrochemical fuel cells such as solid oxide fuel cells (SOFC) are also being considered as a power source since they can produce instantaneous energy like batteries and conserve the fuel source when not needed. They can also easily be refueled in the field with liquid fuels such as methanol. However they require high temperatures to function; 600 °C is considered a low operating temperature for SOFCs.

As of 2015, most research designs are tethered to a much larger separate power source. For a powered exoskeleton that will not need to be used in completely standalone situations such as a battlefield soldier, this limitation may be acceptable, and the suit may be designed to be used with a permanent power umbilical. This is particularly useful in logistical support and some industrial areas.

Skeleton

Initial exoskeleton experiments are commonly done using inexpensive and easy to mold materials, such as steel and aluminium. However, steel is heavy and the powered exoskeleton must work harder to overcome its own weight in order to assist the wearer, reducing efficiency. The aluminium alloys used are lightweight, but fail through fatigue quickly; it would be unacceptable for the exoskeleton to fail catastrophically in a high-load condition by "folding up" on itself and injuring the wearer.[35]

As the design moves past the initial exploratory steps, the engineers move to progressively more expensive and strong, but lightweight materials, such as titanium, and use more complex component construction methods, such as molded carbon-fiber plates.

Actuators

The powerful, but lightweight design issues are also true of the joint actuators. Standard hydraulic cylinders are powerful and capable of being precise, but they are also heavy due to the fluid-filled hoses and actuator cylinders, and the fluid has the potential to leak onto the user. Pneumatics are generally too unpredictable for precise movement since the compressed gas is springy, and the length of travel will vary with the gas compression and the reactive forces pushing against the actuator.

Pressurized hydraulic fluid leaks can be dangerous to humans. A jet squirting from a pinhole leak can penetrate skin at pressures as low as 100 PSI / 6.9 bar.[36] If the injected fluid is not surgically removed, gangrene and poisoning can occur.

Generally electronic servomotors are more efficient and power-dense, utilizing high-gauss permanent magnets and step-down gearing to provide high torque and responsive movement in a small package. Geared servomotors can also utilize electronic braking to hold in a steady position while consuming minimal power.

Additionally, new series elastic actuators and other deformable actuators are being proposed for use in robotic exoskeletons based on the ideas of control of stiffness in human limbs.

Pneumatic air muscle

Pneumatic artificial muscles are a new technology in pneumatic actuators. In this actuator, the volume of the cylinder changes, aiding performance according to thermodynamic principles.

A similar artificial muscle is the air muscle, also known as the Braided Pneumatic Actuator, a lightweight and very flexible design that is more powerful than any pneumatic actuator.

Mechanical advantage devices such as levers and pulleys are also being used as actuators, but it has not yet been proven that they can actually increase strength or reduce fatigue.

Joint flexibility

Flexibility of the human anatomy is another design issue, and which also affects the design of unpowered hard shell space suits. Several human joints such as the hips and shoulders are ball and socket joints, with the center of rotation inside the body. It is difficult for an exoskeleton to exactly match the motions of this ball joint using a series of external single-axis hinge points, limiting flexibility of the wearer.

A separate exterior ball joint can be used alongside the shoulder or hip, but this then forms a series of parallel rods in combination with the wearer's bones. As the external ball joint is rotated through its range of motion, the positional length of the knee/elbow joint will lengthen and shorten, causing joint misalignment with the wearer's body. This slip in suit alignment with the wearer can be permitted, or the suit limbs can be designed to lengthen and shorten under power assist as the wearer moves, to keep the knee/elbow joints in alignment.

A partial solution for more accurate free-axis movement is a hollow spherical ball joint that encloses the human joint, with the human joint as the center of rotation for the hollow sphere. Rotation around this joint may still be limited unless the spherical joint is composed of several plates that can either fan out or stack up onto themselves as the human ball joint moves through its full range of motion.

Spinal flexibility is another challenge since the spine is effectively a stack of limited-motion ball joints. There is no simple combination of external single-axis hinges that can easily match the full range of motion of the human spine. A chain of external ball joints behind the spine can perform a close approximation, though it is again the parallel-bar length problem. Leaning forward from the waist, the suit shoulder joints would press down into the wearer's body. Leaning back from the waist, the suit shoulder joints would lift off the wearer's body. Again, this alignment slop with the wearer's body can be permitted, or the suit can be designed to rapidly lengthen or shorten the exoskeleton spine under power assist as the wearer moves.

NASA AX-5 hard shell space suit

The NASA Ames Research Center experimental AX-5 hard-shell space suit (1988), had a flexibility rating of 95%, compared to what movements are possible while not wearing the suit. It is composed of gasketed hard shell sections joined with free-rotating mechanical bearings that spin around as the person moves.

However, the free-rotating hard sections have no limit on rotation and can potentially move outside the bounds of joint limits. It requires high precision manufacturing of the bearing surfaces to prevent binding, and the bearings may jam if exposed to lunar dust.[37]

Power control and modulation

Control and modulation of excessive and unwanted movement is a third large problem. It is not enough to build a simple single-speed assist motor, with forward/hold/reverse position controls and no on-board computer control. Such a mechanism can be too fast for the user's desired motion, with the assisted motion overshooting the desired position. If the wearer's body is enclosed with simple contact surfaces that trigger suit motion, the overshoot can result the wearer's body lagging behind the suit limb position, resulting in contact with a position sensor to move the exoskeleton in the opposite direction. This lagging of the wearer's body can lead to an uncontrolled high-speed oscillatory motion, and a powerful assist mechanism can batter or injure the operator unless shut down remotely. (An underdamped servo typically exhibits oscillations like this.)[38]

A single-speed assist mechanism which is slowed down to prevent oscillation is then restrictive on the agility of the wearer. Sudden unexpected movements such as tripping or being pushed over requires fast precise movements to recover and prevent falling over, but a slow assist mechanism may simply collapse and injure the user inside. (This is known as an overdamped servo.)[38]

Fast and accurate assistive positioning is typically done using a range of speeds controlled using computer position sensing of both the exoskeleton and the wearer, so that the assistive motion only moves as fast or as far as the motion of the wearer and does not overshoot or undershoot. (This is called a critically damped servo.)[38] This may involve rapidly accelerating and decelerating the motion of the suit to match the wearer, so that their limbs slightly press against the interior of the suit and then it moves out of the way to match the wearer's motion. The computer control also needs to be able to detect unwanted oscillatory motions and shut down in a safe manner if damage to the overall system occurs.

Detection of unsafe/invalid motions

A fourth issue is detection and prevention of invalid or unsafe motions, which is managed by an on-board real-time computational Self-Collision Detection System.[39]

It would be unacceptable for an exoskeleton to be able to move in a manner that exceeds the range of motion of the human body and tear muscle ligaments or dislocate joints. This problem can be partially solved using designed limits on hinge motion, such as not allowing the knee or elbow joints to flex backwards onto themselves.

However, the wearer of a powered exoskeleton can additionally damage themselves or the suit by moving the hinge joints through a series of combined and otherwise valid movements which together cause the suit to collide with itself or the wearer.

A powered exoskeleton would need to be able to computationally track limb positions and limit movement so that the wearer does not casually injure themselves through unintended assistive motions, such as when coughing, sneezing, when startled, or if experiencing a sudden uncontrolled seizure or muscle spasm.

Pinching and joint fouling

An exoskeleton is typically constructed of very strong and hard materials, while the human body is much softer than the alloys and hard plastics used in the exoskeleton. Human skin is also covered with hair over the majority of the surface area. An exoskeleton typically cannot be worn directly in contact with bare skin due to the potential for skin and hair pinching where the exoskeleton plates and servos slide across each other. Instead the wearer may be enclosed in a heavy fabric suit to protect them from joint pinch hazards.

Current exoskeleton joints themselves are also prone to environmental fouling from sand and grit, and may need protection from the elements to keep operating effectively. A traditional way of handling this is with seals and gaskets around rotating parts, but can also be accomplished by enclosing the exoskeleton mechanics in a tough fabric suit separate from the user, which functions as a protective "skin" for the exoskeleton. This enclosing suit around the exoskeleton can also protect the wearer from pinch hazards.

Adaptation to user size variations

Most exoskeletons pictured in this article typically show a fixed length distance between joints, but humans exhibit a wide range of physical size differences and skeletal bone lengths, so a one-size-fits-all fixed-size exoskeleton would not work. Although military use would generally use only larger adult sizes, civilian use may extend across all size ranges, including physically disabled babies and small children.

There are several possible solutions to this problem:

A further difficulty is that not only is there variation in bone lengths, but also limb girth due to bone geometry, muscle build, fat, and any user clothing layering such as insulation for extreme cold or hot environments. An exoskeleton will generally need to fit the user's limb girth snugly so that their arms and legs are not loose inside and flopping around an oversized exoskeleton cavity, or so tight that the user's skin is lesioned from abrasion from a too-small exoskeleton cavity.

See also

References

  1. Yagin, Nicholas. "Apparatus for Facilitating Walking". U.S. Patent 440,684 filed February 11, 1890 and issued November 18, 1890.
  2. Kelley, C. Leslie. "Pedomotor". U.S. Patent 1,308,675 filed April 24, 1917 and issued July 1, 1919.
  3. Specialty Materials Handling Products Operation General Electric Company,"Final Report On Hardiman Prototype For Machine Augmentation Of Human Strength And Endurance," 30 August 1971.
  4. "Exoskeleton". Inventors.about.com. Retrieved 2016-02-20.
  5. Vukobratovic, Miomir (2007-02-07). "When Were Active Exoskeletons Actually Born" (PDF). Retrieved 2016-06-08.
  6. "They Shall Walk – Giving the Gift of Walking – a 501 C3 nonprofit". Theyshallwalk.org. 2013-01-24. Retrieved 2016-02-20.
  7. "Robo-soldiers: Pentagon to Develop Super-Suits - SPIEGEL ONLINE". Spiegel.de. 2007-01-12. Retrieved 2016-02-20.
  8. "ALTACRO: a Step Rehabilitation Robot". Altacro.vub.ac.be. 2013-10-18. Retrieved 2016-02-08.
  9. 1 2 "Capio - Projects- Robotics Innovation Center - DFKI GmbH". Robotik.dfki-bremen.de. 2013-12-31. Retrieved 2016-02-08.
  10. "VI-Bot - Projects- Robotics Innovation Center - DFKI GmbH". Robotik.dfki-bremen.de. 2010-12-31. Retrieved 2016-02-08.
  11. Feyzabadi, S.; Straube, S.; Folgheraiter, M.; Kirchner, E.A.; Su Kyoung Kim; Albiez, J.C., "Human Force Discrimination during Active Arm Motion for Force Feedback Design," Haptics, IEEE Transactions on, vol.6, no.3, pp.309,319, July-Sept. 2013
  12. "Wiley: Wearable Robots: Biomechatronic Exoskeletons - José L. Pons". Eu.wiley.com. 2001-12-04. Retrieved 2016-02-20.
  13. "Exoskeletons await in work/care closet". Japan Times. 17 June 2012. Retrieved 21 August 2013.
  14. "Robotic Exoskeletons from Cyberdyne Could Help Workers Clean Up Fukushima Nuclear Mess - Scientific American Blog Network". Blogs.scientificamerican.com. 2011-11-09. Retrieved 2016-02-20.
  15. "Building the Real Iron Man | Popular Science". Popsci.com. 2008-04-09. Retrieved 2016-02-20.
  16. "Raytheon unveils lighter, faster, stronger second generation exoskeleton robotic suit". Retrieved 10 July 2015.
  17. "HULC exo-skeleton ready for testing, set to hit the ground running next year (video)". Engadget.com. 2010-07-21. Retrieved 2016-02-20.
  18. "Lockheed Unleashes 'HULC' Super-Strength Gear | WIRED". Blog.wired.com. 2009-02-27. Retrieved 2016-02-08.
  19. 1 2 "Building the Real Iron Man | Popular Science". Popsci.com. 2008-04-09. Retrieved 2016-02-20.
  20. "Real-Life Iron Man: A Robotic Suit That Magnifies Human Strength - Scientific American". Sciam.com. 2008-04-30. Retrieved 2016-02-20.
  21. "AFP: Japan robot suit gets global safety certificate". Web.archive.org. 2013-03-05. Archived from the original on March 5, 2013. Retrieved 2016-02-26.
  22. "We're Sorry - Scientific American". Sciam.com. Retrieved 2016-02-08.
  23. "The Future of Exoskeletons: Lighter Loads, Limbs and More - Scientific American". Sciam.com. 2007-09-21. Retrieved 2016-02-20.
  24. "Indego – Powering People Forward - Parker Indego" (PDF). 2014.
  25. Alexander, Dan (15 April 2015). "Innovation Factory: How Parker Hannifin Pumps Out Breakthrough Products". Forbes. Retrieved 21 June 2017.
  26. "Telerobotics, Haptics & Human-Robot Interfaces". ESA Telerobotics. Retrieved 2016-02-20.
  27. "Ghent University Wearable Assistive Lower Leg eXoskeleton (WALL-X) project page". Users.ugent.be. Retrieved 2016-02-20.
  28. "PLOS ONE: A Simple Exoskeleton That Assists Plantarflexion Can Reduce the Metabolic Cost of Human Walking". Journals.plos.org. 2013-02-13. Retrieved 2016-02-20.
  29. Joseph, Anthony (2016-05-23). "Father paralysed from the waist walks daughter down the aisle thanks to robotic Rex suit | Daily Mail Online". Dailymail.co.uk. Retrieved 2016-12-18.
  30. Bradford, Eleanor (2011-11-08). "Bionic legs developed by Scots engineers go on sale - BBC News". Bbc.co.uk. Retrieved 2016-12-18.
  31. "Soft Exosuits". Wyss.harvard.edu. Retrieved 2017-03-05.
  32. "Exoped Exoskelton". pedasys.com. Retrieved 2017-08-10.
  33. 1 2 0309165768Meeting the Energy Needs of Future Warriors. National Academies Press. 2004. p. 40. ISBN 0309165768. Retrieved 8 February 2016.
  34. "Lithium-Ion Battery Inventor Introduces New Technology for Fast-Charging, Noncombustible Batteries | UT News | The University of Texas at Austin". News.utexas.edu. 2017-02-28. Retrieved 2017-04-17.
  35. Frumento, Christopher; Messier, Ethan; Montero, Victor (2010-03-02). "History and Future of Rehabilitation Robotics" (PDF). Retrieved 2016-02-20.
  36. "The Fluid Power Safety Institute". Retrieved 2016-02-08.
  37. Investigation of a Cable-driven Parallel Mechanism for Pressure Suit Arm Resizing and Motion Assistance. ProQuest. 2007. pp. 19–22. ISBN 9780549262756. Retrieved 8 February 2016.
  38. 1 2 3 Nwokah, Osita D.I.; Hurmuzlu, Yildirim (2001). The Mechanical Systems Design Handbook Modeling, Measurement, and Control. Hoboken: CRC Press. pp. 563–565. ISBN 9781420036749. Retrieved 8 February 2016.
  39. "IEEE Xplore Abstract - Real-time and Precise Self Collision Detection System for Humanoid Robots". Ieeexplore.ieee.org. 2005-04-22. doi:10.1109/ROBOT.2005.1570256. Retrieved 2016-02-08.
  40. Cote, David O.; Schopper, Aaron W. (1984-07-01). "Anthropometric Cockpit Compatibility Assessment of US Army Aircraft for Large and Small Personnel Wearing a Cold Weather, Armored Vest, Chemical Defense Protective Clothing Configuration" (PDF). Defense Technical Information Center. Retrieved 2016-02-20.
Wikimedia Commons has media related to Powered exoskeletons.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.