Warwick railway station, Perth

Warwick
Northbound view from Platform 1 in January 2006
Location	Mitchell Freeway, Warwick Australia
Coordinates	31°50′40″S 115°47′47″E / 31.844571°S 115.796521°E / -31.844571; 115.796521Coordinates: 31°50′40″S 115°47′47″E / 31.844571°S 115.796521°E / -31.844571; 115.796521
Owned by	Public Transport Authority
Operated by	Transperth
Line(s)	[[Butler railway line|Joondalup]]
Distance	13.0 kilometres from Perth
Platforms	2 (1 island)
Tracks	2
Bus routes	17
Bus stands	8
Construction
Structure type	Ground
Disabled access	Yes
Other information
Station code	JWK 99831 (platform 1) 99832 (platform 2)
Fare zone	2
History
Opened	28 February 1993
Electrified	Yes
Services
Preceding station   Transperth Trains network   Following station Stirling towards Elizabeth Quay Joondalup Line Greenwood towards Butler

Warwick railway station is a railway station on the Transperth network. It is located on the Joondalup line, 13 kilometres from Perth station serving the suburb of Warwick.

History

Prior to the commissioning of the site as a railway station, the location was originally a bus interchange known as the Warwick Bus Station. Opened in 1987,^[1] it was similar in design and appearance to facilities constructed at Mirrabooka and Rockingham for the same purpose. It provided services connecting the Perth central business district to bus routes servicing the then rapidly expanding northern suburbs. The site also contains a privately operated day care centre which remains in operation to this day.^[2]

The original bus station was connected to the adjoining Mitchell Freeway by a two-lane on/off ramp in both the north and south directions, constructed in the middle of the Mitchell Freeway reserve. It was constructed to service freeway express buses from Perth, services which were subsequently phased out with the opening of the railway station.^[3] The on/off ramp was connected to the bus station via a bridge spanning the southbound lanes of the Freeway. The bus station was positioned on land north of the connecting bridge between the Freeway East Embankment (controlled by the Main Roads Department), Hawker Avenue, land occupied by the Warwick chapel of the Church of Jesus Christ of Latter-day Saints, and adjoining residential housing.^[2]

Design and construction

At the time of the station's design, it was recognised by The Urban Rail Electrification Committee that the placement of bus services in close proximity or direct connection to rail infrastructure was of significant importance. This was evidenced by the Kelmscott and Armadale stations, and the then recently completed Cannington station.^[3]

Under the Northern Suburbs Transit System Project, construction on the station was scheduled to commence on 16 November 1991, with completion expected by the end of December 1992. Whitfords station being of exactly the same design was scheduled for construction in synchronisation with Warwick station.^[2]

The station was to include a number of facilities, including a bus concourse to connect with feeder bus services, information booths and offices for railway staff, amenities and services, as well as access services for mobility-impaired passengers in line with design requirements of the time.^[2] Further to this, pieces of the Passenger Information Network installed at the station included previously unseen electronic displays on the upper bus decks designed to provide drivers with information so they could connect with appointed trains or communicate with bus depot control in the event of delays.^[3] Passenger information systems across the network are currently being upgraded as part of the improvements being delivered under the New MetroRail Project.^[4]

Car parking spaces were also included as part of the construction project, which included a significant number of on-grade parking bays on the eastern side of the station for commuter use.^[2]

The design of the station also allowed for the possible extension of the upper bus deck in a southward direction towards Beach Road. This extension would provide for five additional regular bus bays, as well as additional pedestrian access if required.^[5]

As part of the construction of the new railway station the on/off ramps used for buses were demolished; however the original bridge over the southbound lanes still remains intact to this day. A pedestrian pathway was added to the bridge to enable pedestrian movements across to the easy side of the station from a new footbridge linking to Methuen Way, Duncraig.^[2]

The most interesting part of the station was the upper bus deck. The deck was constructed of precast concrete that was formed off site, which was then transported to the site before being placed atop columns constructed as part of the stations foundations. Precast concrete flooring was then put in place, held in specially formed ridges running the length of the beams. This upper deck was the most expensive structural element of the station, and was the cause of significant attention and consideration as part of the design and construction process.^[2]

Warwick station opened on 28 February 1993. ^[6][7][8]

Demolition and associated works

Station Entrance

Once the new railway station including the bus concourse had opened, the old transfer station was demolished.^[2] The costs of demolition for the existing station were not included as part of the construction budget for the new railway station.^[9] The land resulting from the demolition of the transfer station was then converted into additional commuter car parking space, bringing the available number of bays up to 830.^[2]

Services

Warwick station is served by Transperth Joondalup line services.^[10]

Platforms

Platforms currently in use are as follows:

Bus routes

References

External links

Media related to Warwick railway station, Perth at Wikimedia Commons