Transmittance

Earth's atmospheric transmittance over 1 nautical mile sea level path (infrared region^[1]). Because of the natural radiation of the hot atmosphere, the intensity of radiation is different from the transmitted part.

Transmittance of ruby in optical and near-IR spectra. Note the two broad blue and green absorption bands and one narrow absorption band on the wavelength of 694 nm, which is the wavelength of the ruby laser.

Transmittance of the surface of a material is its effectiveness in transmitting radiant energy. It is the fraction of incident electromagnetic power that is transmitted through a sample, in contrast to the transmission coefficient, which is the ratio of the transmitted to incident electric field.^[2]

Internal transmittance refers to energy loss by absorption, whereas (total) transmittance is that due to absorption, scattering, reflection, etc.

Mathematical definitions

Hemispherical transmittance

Hemispherical transmittance of a surface, denoted T, is defined as^[3]

T={\frac {\Phi _{\mathrm {e} }^{\mathrm {t} }}{\Phi _{\mathrm {e} }^{\mathrm {i} }}},

where

Φ_e^t is the radiant flux transmitted by that surface;
Φ_eⁱ is the radiant flux received by that surface.

Spectral hemispherical transmittance

Spectral hemispherical transmittance in frequency and spectral hemispherical transmittance in wavelength of a surface, denoted T_ν and T_λ respectively, are defined as^[3]

T_{\nu }={\frac {\Phi _{\mathrm {e} ,\nu }^{\mathrm {t} }}{\Phi _{\mathrm {e} ,\nu }^{\mathrm {i} }}},

T_{\lambda }={\frac {\Phi _{\mathrm {e} ,\lambda }^{\mathrm {t} }}{\Phi _{\mathrm {e} ,\lambda }^{\mathrm {i} }}},

where

Φ_e,ν^t is the spectral radiant flux in frequency transmitted by that surface;
Φ_e,νⁱ is the spectral radiant flux in frequency received by that surface;
Φ_e,λ^t is the spectral radiant flux in wavelength transmitted by that surface;
Φ_e,λⁱ is the spectral radiant flux in wavelength received by that surface.

Directional transmittance

Directional transmittance of a surface, denoted T_Ω, is defined as^[3]

T_{\Omega }={\frac {L_{\mathrm {e} ,\Omega }^{\mathrm {t} }}{L_{\mathrm {e} ,\Omega }^{\mathrm {i} }}},

where

L_e,Ω^t is the radiance transmitted by that surface;
L_e,Ωⁱ is the radiance received by that surface.

Spectral directional transmittance

Spectral directional transmittance in frequency and spectral directional transmittance in wavelength of a surface, denoted T_ν,Ω and T_λ,Ω respectively, are defined as^[3]

T_{\nu ,\Omega }={\frac {L_{\mathrm {e} ,\Omega ,\nu }^{\mathrm {t} }}{L_{\mathrm {e} ,\Omega ,\nu }^{\mathrm {i} }}},

T_{\lambda ,\Omega }={\frac {L_{\mathrm {e} ,\Omega ,\lambda }^{\mathrm {t} }}{L_{\mathrm {e} ,\Omega ,\lambda }^{\mathrm {i} }}},

where

L_e,Ω,ν^t is the spectral radiance in frequency transmitted by that surface;
L_e,Ω,νⁱ is the spectral radiance received by that surface;
L_e,Ω,λ^t is the spectral radiance in wavelength transmitted by that surface;
L_e,Ω,λⁱ is the spectral radiance in wavelength received by that surface.

Beer–Lambert law

By definition, transmittance is related to optical depth and to absorbance as

T=e^{-\tau }=10^{-A},

where

τ is the optical depth;
A is the absorbance.

The Beer–Lambert law states that, for N attenuating species in the material sample,

T=e^{-\sum _{i=1}^{N}\sigma _{i}\int _{0}^{\ell }n_{i}(z)\mathrm {d} z}=10^{-\sum _{i=1}^{N}\varepsilon _{i}\int _{0}^{\ell }c_{i}(z)\mathrm {d} z},

or equivalently that

\tau =\sum _{i=1}^{N}\tau _{i}=\sum _{i=1}^{N}\sigma _{i}\int _{0}^{\ell }n_{i}(z)\,\mathrm {d} z,

A=\sum _{i=1}^{N}A_{i}=\sum _{i=1}^{N}\varepsilon _{i}\int _{0}^{\ell }c_{i}(z)\,\mathrm {d} z,

where

σ_i is the attenuation cross section of the attenuating specie i in the material sample;
n_i is the number density of the attenuating specie i in the material sample;
ε_i is the molar attenuation coefficient of the attenuating specie i in the material sample;
c_i is the amount concentration of the attenuating specie i in the material sample;
ℓ is the path length of the beam of light through the material sample.

Attenuation cross section and molar attenuation coefficient are related by

\varepsilon _{i}={\frac {\mathrm {N_{A}} }{\ln {10}}}\,\sigma _{i},

and number density and amount concentration by

c_{i}={\frac {n_{i}}{\mathrm {N_{A}} }},

where N_A is the Avogadro constant.

In case of uniform attenuation, these relations become^[4]

T=e^{-\sum _{i=1}^{N}\sigma _{i}n_{i}\ell }=10^{-\sum _{i=1}^{N}\varepsilon _{i}c_{i}\ell },

or equivalently

\tau =\sum _{i=1}^{N}\sigma _{i}n_{i}\ell ,

A=\sum _{i=1}^{N}\varepsilon _{i}c_{i}\ell .

Cases of non-uniform attenuation occur in atmospheric science applications and radiation shielding theory for instance.

SI radiometry units

**SI radiometry units**
Quantity		Unit		Dimension	Notes
Name	Symbol^{[nb 1]}	Name	Symbol	Symbol	Notes
Radiant energy	Q_e^{[nb 2]}	joule	J	M⋅L²⋅T⁻²	Energy of electromagnetic radiation.
Radiant energy density	w_e	joule per cubic metre	J/m³	M⋅L⁻¹⋅T⁻²	Radiant energy per unit volume.
Radiant flux	Φ_e^{[nb 2]}	watt	W or J/s	M⋅L²⋅T⁻³	Radiant energy emitted, reflected, transmitted or received, per unit time. This is sometimes also called "radiant power".
Spectral flux	Φ_e,ν^{[nb 3]} or Φ_e,λ^{[nb 4]}	watt per hertz or watt per metre	W/Hz or W/m	M⋅L²⋅T⁻² or M⋅L⋅T⁻³	Radiant flux per unit frequency or wavelength. The latter is commonly measured in W⋅sr⁻¹⋅m⁻²⋅nm⁻¹.
Radiant intensity	I_e,Ω^{[nb 5]}	watt per steradian	W/sr	M⋅L²⋅T⁻³	Radiant flux emitted, reflected, transmitted or received, per unit solid angle. This is a directional quantity.
Spectral intensity	I_e,Ω,ν^{[nb 3]} or I_e,Ω,λ^{[nb 4]}	watt per steradian per hertz or watt per steradian per metre	W⋅sr⁻¹⋅Hz⁻¹ or W⋅sr⁻¹⋅m⁻¹	M⋅L²⋅T⁻² or M⋅L⋅T⁻³	Radiant intensity per unit frequency or wavelength. The latter is commonly measured in W⋅sr⁻¹⋅nm⁻¹. This is a directional quantity.
Radiance	L_e,Ω^{[nb 5]}	watt per steradian per square metre	W⋅sr⁻¹⋅m⁻²	M⋅T⁻³	Radiant flux emitted, reflected, transmitted or received by a surface, per unit solid angle per unit projected area. This is a directional quantity. This is sometimes also confusingly called "intensity".
Spectral radiance	L_e,Ω,ν^{[nb 3]} or L_e,Ω,λ^{[nb 4]}	watt per steradian per square metre per hertz or watt per steradian per square metre, per metre	W⋅sr⁻¹⋅m⁻²⋅Hz⁻¹ or W⋅sr⁻¹⋅m⁻³	M⋅T⁻² or M⋅L⁻¹⋅T⁻³	Radiance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅sr⁻¹⋅m⁻²⋅nm⁻¹. This is a directional quantity. This is sometimes also confusingly called "spectral intensity".
Irradiance Flux density	E_e^{[nb 2]}	watt per square metre	W/m²	M⋅T⁻³	Radiant flux received by a surface per unit area. This is sometimes also confusingly called "intensity".
Spectral irradiance Spectral flux density	E_e,ν^{[nb 3]} or E_e,λ^{[nb 4]}	watt per square metre per hertz or watt per square metre, per metre	W⋅m⁻²⋅Hz⁻¹ or W/m³	M⋅T⁻² or M⋅L⁻¹⋅T⁻³	Irradiance of a surface per unit frequency or wavelength. This is sometimes also confusingly called "spectral intensity". Non-SI units of spectral flux density include Jansky = 10⁻²⁶ W⋅m⁻²⋅Hz⁻¹ and solar flux unit (1SFU = 10⁻²² W⋅m⁻²⋅Hz⁻¹=10⁴Jy).
Radiosity	J_e^{[nb 2]}	watt per square metre	W/m²	M⋅T⁻³	Radiant flux leaving (emitted, reflected and transmitted by) a surface per unit area. This is sometimes also confusingly called "intensity".
Spectral radiosity	J_e,ν^{[nb 3]} or J_e,λ^{[nb 4]}	watt per square metre per hertz or watt per square metre, per metre	W⋅m⁻²⋅Hz⁻¹ or W/m³	M⋅T⁻² or M⋅L⁻¹⋅T⁻³	Radiosity of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m⁻²⋅nm⁻¹. This is sometimes also confusingly called "spectral intensity".
Radiant exitance	M_e^{[nb 2]}	watt per square metre	W/m²	M⋅T⁻³	Radiant flux emitted by a surface per unit area. This is the emitted component of radiosity. "Radiant emittance" is an old term for this quantity. This is sometimes also confusingly called "intensity".
Spectral exitance	M_e,ν^{[nb 3]} or M_e,λ^{[nb 4]}	watt per square metre per hertz or watt per square metre, per metre	W⋅m⁻²⋅Hz⁻¹ or W/m³	M⋅T⁻² or M⋅L⁻¹⋅T⁻³	Radiant exitance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m⁻²⋅nm⁻¹. "Spectral emittance" is an old term for this quantity. This is sometimes also confusingly called "spectral intensity".
Radiant exposure	H_e	joule per square metre	J/m²	M⋅T⁻²	Radiant energy received by a surface per unit area, or equivalently irradiance of a surface integrated over time of irradiation. This is sometimes also called "radiant fluence".
Spectral exposure	H_e,ν^{[nb 3]} or H_e,λ^{[nb 4]}	joule per square metre per hertz or joule per square metre, per metre	J⋅m⁻²⋅Hz⁻¹ or J/m³	M⋅T⁻¹ or M⋅L⁻¹⋅T⁻²	Radiant exposure of a surface per unit frequency or wavelength. The latter is commonly measured in J⋅m⁻²⋅nm⁻¹. This is sometimes also called "spectral fluence".
Hemispherical emissivity	ε			1	Radiant exitance of a surface, divided by that of a black body at the same temperature as that surface.
Spectral hemispherical emissivity	ε_ν or ε_λ			1	Spectral exitance of a surface, divided by that of a black body at the same temperature as that surface.
Directional emissivity	ε_Ω			1	Radiance emitted by a surface, divided by that emitted by a black body at the same temperature as that surface.
Spectral directional emissivity	ε_Ω,ν or ε_Ω,λ			1	Spectral radiance emitted by a surface, divided by that of a black body at the same temperature as that surface.
Hemispherical absorptance	A			1	Radiant flux absorbed by a surface, divided by that received by that surface. This should not be confused with "absorbance".
Spectral hemispherical absorptance	A_ν or A_λ			1	Spectral flux absorbed by a surface, divided by that received by that surface. This should not be confused with "spectral absorbance".
Directional absorptance	A_Ω			1	Radiance absorbed by a surface, divided by the radiance incident onto that surface. This should not be confused with "absorbance".
Spectral directional absorptance	A_Ω,ν or A_Ω,λ			1	Spectral radiance absorbed by a surface, divided by the spectral radiance incident onto that surface. This should not be confused with "spectral absorbance".
Hemispherical reflectance	R			1	Radiant flux reflected by a surface, divided by that received by that surface.
Spectral hemispherical reflectance	R_ν or R_λ			1	Spectral flux reflected by a surface, divided by that received by that surface.
Directional reflectance	R_Ω			1	Radiance reflected by a surface, divided by that received by that surface.
Spectral directional reflectance	R_Ω,ν or R_Ω,λ			1	Spectral radiance reflected by a surface, divided by that received by that surface.
Hemispherical transmittance	T			1	Radiant flux transmitted by a surface, divided by that received by that surface.
Spectral hemispherical transmittance	T_ν or T_λ			1	Spectral flux transmitted by a surface, divided by that received by that surface.
Directional transmittance	T_Ω			1	Radiance transmitted by a surface, divided by that received by that surface.
Spectral directional transmittance	T_Ω,ν or T_Ω,λ			1	Spectral radiance transmitted by a surface, divided by that received by that surface.
Hemispherical attenuation coefficient	μ	reciprocal metre	m⁻¹	L⁻¹	Radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume.
Spectral hemispherical attenuation coefficient	μ_ν or μ_λ	reciprocal metre	m⁻¹	L⁻¹	Spectral radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume.
Directional attenuation coefficient	μ_Ω	reciprocal metre	m⁻¹	L⁻¹	Radiance absorbed and scattered by a volume per unit length, divided by that received by that volume.
Spectral directional attenuation coefficient	μ_Ω,ν or μ_Ω,λ	reciprocal metre	m⁻¹	L⁻¹	Spectral radiance absorbed and scattered by a volume per unit length, divided by that received by that volume.
See also: SI · Radiometry · Photometry

↑ Standards organizations recommend that radiometric quantities should be denoted with suffix "e" (for "energetic") to avoid confusion with photometric or photon quantities.
1 2 3 4 5 Alternative symbols sometimes seen: W or E for radiant energy, P or F for radiant flux, I for irradiance, W for radiant exitance.
1 2 3 4 5 6 7 Spectral quantities given per unit frequency are denoted with suffix "ν" (Greek)—not to be confused with suffix "v" (for "visual") indicating a photometric quantity.
1 2 3 4 5 6 7 Spectral quantities given per unit wavelength are denoted with suffix "λ" (Greek).
1 2 Directional quantities are denoted with suffix "Ω" (Greek).

References

↑ "Electronic warfare and radar systems engineering handbook". Archived from the original on September 13, 2001. CS1 maint: Unfit url (link)
↑ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Transmittance".
1 2 3 4 "Thermal insulation — Heat transfer by radiation — Physical quantities and definitions". ISO 9288:1989. ISO catalogue. 1989. Retrieved 2015-03-15.
↑ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Beer–Lambert law".

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

Transmittance

Mathematical definitions

Hemispherical transmittance

Spectral hemispherical transmittance

Directional transmittance

Spectral directional transmittance

Beer–Lambert law

SI radiometry units

See also

References