Bell V-280 Valor

V-280 Valor
A mock-up of a Bell V-280, exhibited at HeliExpo 2016 in Louisville, Kentucky
Role	Vertical lift aircraft
National origin	United States
Manufacturer	Bell Helicopter / Lockheed Martin
Status	Under development

The Bell V-280 Valor is a third-generation tilt-rotor aircraft being developed by Bell Helicopter and Lockheed Martin for the United States Army's Future Vertical Lift (FVL) program.^[1] The aircraft was officially unveiled at the 2013 Army Aviation Association of America's (AAAA) Annual Professional Forum and Exposition in Fort Worth, Texas, with a projected first flight in 2017.

Development

On 5 June 2013, Bell announced that the V-280 Valor design had been selected by the US Army for the Joint Multi-Role (JMR) Technology Demonstrator (TD) phase. The JMR-TD phase is the technology demonstration precursor to Future Vertical Lift (FVL). The Army classified the offering as a Category I proposal, meaning it is a well-conceived, scientifically or technically sound proposal pertinent to program goals and objectives with applicability to Army mission needs, offered by a responsible contractor with the competent scientific and technical staff supporting resources required to achieve results.^[2] JMR-TD contracts were expected to be awarded in September 2013, with flights scheduled for 2017.^[3] On 9 September 2013, Bell announced it would team up with Lockheed Martin to develop the V-280. Lockheed will provide integrated avionics, sensors, and weapons to the aircraft. Additional partners were announced in the following months,^[1] including Moog Inc. for the flight control systems,^[4] GE Aviation for the engines,^[5] GKN for the tail structure,^[6] Spirit AeroSystems for the composite fuselage,^[7] Eaton Corporation as the distributor of hydraulics and power generation systems,^[8] and Astronics Advanced Electric Systems to design and manufacture power distribution systems.^[9] Israel Aerospace Industries, the first international partner recruited for the V-280, will supply the nacelle structures, and Textron sister company TRU Simulation & Training will build a high-fidelity marketing simulator and desktop maintenance trainer.^[10]

On 2 October 2013, the U.S. Army awarded a technology investment agreement to Bell Helicopters for the V-280 Valor tiltrotor under the Joint Multi-Role program.^[11] Awards were also given to AVX Aircraft, Karem Aircraft, and a Sikorsky-Boeing team. JMR is not to develop a prototype for the next family of vehicles, but to develop technologies and interfaces. The TIAs give the four teams nine months to complete preliminary design of their rotorcraft, which the Army will then review and authorize the construction of two competing demonstrators to fly in 2017. While there is a potential for an early downselect, the four teams are focused on the 2017 flight demonstrations.^[12][13] Each of the four teams received $6.5 million from the Army for phase I of the program, although Bell is investing an undisclosed amount of its own money.^[14] On 21 October 2013, Bell unveiled the first full-scale mock-up of the V-280 Valor at Association of the United States Army 2013.^[15]

On 11 August 2014, the Army informed the Bell-Lockheed team that they had chosen the V-280 Valor to continue with the JMR demonstration program. The Boeing-Sikorsky team offering the SB-1 Defiant was also chosen.^[16] Announcement of the selections was officially made on 3 October 2014, and the teams will begin building technology demonstration aircraft for test flights beginning in 2017.^[17] Bell unveiled a full-scale mock-up of the V-280 Valor on the floor at AUSA 2014 to showcase the configuration and design of the high-speed platform. It is focused on the infantry squad and is to handle much like a helicopter in terms of low-speed agility to have unprecedented pitch, roll, and yaw response for those operations. Roughly the size of the current medium-lift helicopter, the V-280 is designed to travel twice as fast and twice as far. Bell is pitching these capabilities for movement over vast areas like the Pacific; the program director said the need for forward arming and refueling points could be eliminated and that one FOB (forward operating base) in the middle of a country, such as Afghanistan, could cover the entire country.^[18]

Although Bell sold its share in the AW609 program in 2011, Bell continues to work on the AW609 and considers commercial potential for the V-280, as a military mass production of 2-4,000 aircraft could reduce unit cost to commercially acceptable levels.^[19][20] However in 2016, Bell preferred the 609 for commercial, and kept the V-280 for military only. Bell also stated that conventional helicopters were not part of Bell's military future.^[21]

Lockheed Martin is on track to take over Sikorsky, and this has caused Bell and LM to redefine their relationship.^[22]

Prototype

In June 2015, Bell Helicopter's subcontractor Spirit AeroSystems began assembly of the composite fuselage for the first prototype V-280 Valor,^[23] which was delivered in September 2015.^[24] Although the V-280 is initially planned for the JMR demonstration program, Bell does not anticipate much difference between it and a final FVL entry.^[25] By January 2016, the V-280 demonstrator was 23 percent complete,^[26] with the fuselage and wings mated together in early May 2016.^[27] The demonstrator aircraft began ground vibration testing in Amarillo during February 2017, with the aircraft reaching 95 percent complete. ^[28]

Design

The V-280 is reported to be designed for a cruising speed of 280 knots (320 mph; 520 km/h) (hence the name V-280),^[29] a top speed of 300 knots (350 mph; 560 km/h), a range of 2,100 nautical miles (2,400 mi; 3,900 km), and an effective combat range of 500 to 800 nmi (580 to 920 mi; 930 to 1,480 km). Expected maximum takeoff weight is around 30,000 lb.^[30] In one major difference from the earlier V-22 Osprey tiltrotor, the engines remain in place while the rotors and drive shafts tilt. A driveshaft runs through the straight wing, allowing both prop rotors to be driven by a single engine in the event of engine loss. The V-280 will have retractable landing gear, a triple-redundant fly by wire control system, and a V-tail configuration. The wings are made of a single section of carbon-fiber-reinforced polymer composite, reducing weight and production costs. The V-280 will have a crew of 4 and be capable of transporting up to 14 troops. Dual cargo hooks will give it a lift capacity to carry a 10,000 lb (4,500 kg) M777A2 Howitzer while flying at a speed of 150 knots (170 mph; 280 km/h). The fuselage is visually similar to that of the UH-60 Black Hawk medium lift helicopter. When landed, the wing is in excess of seven feet from the ground, allowing soldiers to egress easily out of two 6-foot (1.8 m) wide side doors and door gunners to have wide fields of fire. Although the initial design is a utility configuration, Bell is also working on an attack configuration.^[31][32][33] Whether different variants of the V-280 would fill utility and attack roles or a single airframe could interchange payloads for either mission, Bell is confident the Valor tiltrotor platform can fulfill both duties; the U.S. Marine Corps is interested in having one aircraft to replace utility and attack helicopters, but the Army, which leads the program, is not committed to the idea and wants distinct platforms for each mission. Bell and Lockheed claim an AV-280 variant can launch rockets, missiles, and even small unmanned aerial vehicles forward or aft with no rotor interference, even in forward flight and cruise modes with the rotors forward.^[25]

GE Aviation will manufacture the engines for the V-280, with the prototype (air vehicle concept demonstrator, or AVCD) using the General Electric T64.^[34] The specific engine for the model performance specification (MPS) is unknown, but has funding from the Army's future affordable turbine engine (FATE) program.^[5] The V-tail structure and ruddervators, made by GKN, will provide high levels of maneuverability and control to the airframe. It will be made of a combination of metals and composites.^[6] Features in the interior include seats that wirelessly charge troops’ radios, night-vision goggles, and other electronic gear and windows that display three-dimensional mission maps.^[35]

Special emphasis has been placed on reducing the weight of the V-280 in comparison to the V-22, which in turn would reduce cost. To do this, composites are used extensively in the wing, fuselage, and tail. Wing skins and ribs are made of a honeycomb-stiffened "sandwich" construction with large-cell carbon cores for fewer, larger, and lighter parts. Skins and ribs are paste-bonded together to eliminate fasteners. With these measures, costs are reduced by over 30 percent compared to a scaled V-22 wing.^[36] Bell expects the V-280 to cost around the same as a AH-64E or MH-60M.^[37] While the Osprey has a higher disk loading and lower hover efficiency than a helicopter, the V-280 will have a lower disk loading and longer wing for greater hover and cruise efficiency.^[10]

References

External links

Wikimedia Commons has media related to Bell V-280.

External images

Full-size mock-up

More mock-up photos by American Helicopter Society

• Bell V-280 Valor - The Future of Vertical Lift Takes Flight
• Fact Sheet - bellv280.com
• Bell Helicopter - CEO Blog
• YouTube - Bell V-280 Valor -- The Future of Vertical Lift Takes Flight