Utah State Route 160
| ||||
|---|---|---|---|---|
| I-15 Business Loop, Beaver | ||||
| Route information | ||||
| Defined by Utah Code §72-4-121 | ||||
| Length: | 3.808 mi[1] (6.128 km) | |||
| Existed: | 1971[2] – present | |||
| Major junctions | ||||
| South end: |
 I-15 near Beaver | |||
 SR-21 in Beaver | ||||
| North end: |
I-15 in Beaver | |||
| Highway system | ||||
| ||||
State Route 160 (SR-160) is a state highway in the U.S. state of Utah providing a business loop around I-15 for the town of Beaver in the south-central portion of the state. The route is the main street for the town and spans 3.8 miles (6.1 km). The highway was established 1961 as I-15 was constructed through the area, replacing US-91.
Route description
The highway begins at a diamond interchange on I-15 heading east and quickly turns north into Main Street. It continues in a northerly direction through the center of the town of Beaver for about 3 miles (4.8 km). In the main part of town, it intersects with SR-21 to the west and SR-153 to the east. After leaving town to the north, the route turns back to the west and ends at another diamond interchange with I-15.
History
The current incarnation of State Route 160 was created in 1961 while I-15 was under construction in the area.[2] It consisted of just 0.4 miles (0.64 km) of road from the I-15 interchange about 1.3 miles (2.1 km) south of Beaver northwest to US-91 (SR-1), which ran through the center of town as Main Street. At the same time, State Route 161 was also created, serving a similar purpose, but on the interchange 1 mile (1.6 km) north of Beaver.
When I-15 was completed north of town in 1964, SR-1 was rerouted as it left Beaver to connect with the new interstate, following the same route as SR-161.[3] As a result, SR-161 was withdrawn to avoid the two state routes overlapping. In 1969, the rest of SR-1 through the town was realigned with I-15. As a result, SR-160 was extended northward to follow the former route of SR-1 along main street north through town, then turning northwest to the interchange at I-15.[2]
Major intersections
The entire route is in Beaver, Beaver County.
| mi[1] | km | Destinations | Notes | ||
|---|---|---|---|---|---|
| 0.000 | 0.000 | I-15 – Cedar City | Southern terminus | ||
| 2.006 | 3.228 | SR-21 west (Center Street) | |||
| 2.194 | 3.531 |  SR-153 east (200 North, Beaver Canyon Scenic Byway) | |||
| 3.808 | 6.128 | I-15 – Fillmore | Northern terminus | ||
| 1.000 mi = 1.609 km; 1.000 km = 0.621 mi | |||||
References
- 1 2 "State Route 60 Highway reference" (PDF). Utah Department of Transportation. December 2008. Retrieved 2009-08-17.
- 1 2 3 "State Route 160 Resolutions" (PDF). Utah Department of Transportation. November 2008. Retrieved 2009-08-17.
- ↑ "State Route 161 Resolutions" (PDF). Utah Department of Transportation. November 2008. Retrieved 2009-08-17.