USS Barbet (AMc-38)

History
United States
Name: Barbet
Namesake: Barbet
Builder: W. A. Robinson, Inc., Ipswich, Massachusetts
Laid down: 31 January 1941
Launched: 24 July 1941
Commissioned: 29 September 1941
Decommissioned: 16 May 1942
In service: 16 May 1942
Out of service: 8 February 1946
Struck: 26 February 1946
Identification:
Fate: Unknown
Status: sold, 13 August 1947
Notes: Converted to a merchant fisherman and retained the name Barbet
General characteristics
Class and type: Accentor-class minesweeper
Displacement: 221 long tons (225 t)
Length: 97 ft 6 in (29.72 m)
Beam: 22 ft 6 in (6.86 m)
Draft: 8 ft 11 in (2.72 m)
Installed power:
Propulsion: 1 × screws
Speed: 10 kn (12 mph; 19 km/h)
Complement: 17
Armament: 2 × .5 in (13 mm) caliber machine guns

USS Barbet (AMc-38) was an Accentor-class coastal minesweeper acquired by the U.S. Navy for the dangerous task of removing mines from minefields laid in the water to prevent ships from passing.

The first ship to be named Barbet by the Navy, AMc-38 was laid down on 31 January 1941 at Ipswich, Massachusetts, by W. A. Robinson, Inc.; launched on 24 July 1941; sponsored by Mrs. E. Robinson; and commissioned on 29 September 1941, Ens. Stuart T. Hotchkiss, USNR, in command.[1]

World War II service

Barbet departed Boston, Massachusetts, on 4 October and arrived at the Naval Mine Warfare School, Yorktown, Virginia, on the 6th. From there, she moved to the Naval Operating Base, Norfolk, Virginia, for additional outfitting. On 4 December, the minesweeper was assigned to Mine Division (MinDiv) 27 and was based at the Section Base, New London, Connecticut.[1]

War patrols

Following the attack on Pearl Harbor on 7 December, she began daily patrols along the New England coast. That assignment lasted until mid February 1942. On the 16th, she received word that she would be transferred to the Panama Canal Zone. First, however, Barbet had to undergo an availability at the Marine Basin Co., Gravesend, New York, to correct damage incurred in a collision with an Eagle boat at Newport, Rhode Island. The repairs were completed midway through March, and the coastal minesweeper departed Gravesend bound for the Canal Zone.[1]

Caribbean operations

After stops at Charleston, South Carolina; Miami, Florida; and Guantanamo Bay, Cuba, she arrived in Coco Solo on 9 April 1942 and began operations with the Inshore Patrol, 15th Naval District.

Pacific Ocean operations

On 5 May, she transited the canal and joined the Pacific Section, Inshore Patrol. She conducted two ship minesweeping operations and patrolled the sea channels. On 16 May 1942, Barbet was decommissioned and placed "in service."[1]

“In service” activity

Her duties, however, remained the same and continued throughout the remainder of World War II. Following the end of the war, Barbet was ordered to Charleston for disposal by the Commandant, 6th Naval District. The coastal minesweeper arrived in Charleston on 22 October 1945.[1]

Post-war deactivation

She was placed out of service at Charleston on 8 February 1946, and her name was struck from the Navy list on 26 February 1946. She was sold by the Maritime Commission at Washington, D.C., on 13 August 1947.[1]

References

  1. 1 2 3 4 5 6 "Barbet I (AMc-38)". Naval History and Heritage Command. 22 June 2015. Retrieved 1 March 2016.

This article incorporates text from the public domain Dictionary of American Naval Fighting Ships. The entry can be found here.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.