APD-40

APD-40
Route information
Length: 9.3 mi[1] (15.0 km)
Existed: 1968 – present
Component
highways:
US 64 Byp. / US 74 / SR 60 / SR 311
Major junctions
South end: I-75 in Cleveland
 
North end: US 11 in Cleveland

APD-40 or APD 40 refers to a road composed of the U.S. Route 64 Bypass (US 64 Byp.) and a section of Tennessee State Route 60 (SR 60) which forms a partial beltway around the business district of Cleveland, Tennessee. The route takes its name from its part of Corridor K of the Appalachian Development Highway System, and is sometimes called Appalachian Highway or simply The Bypass.[2] It is an abbreviation for Appalachian Development Number 40. The route is also designated as Veterans Memorial Highway. The US 64 Byp. section of the road is also multiplexed with SR 311 and part of US 74. The road is a four-lane divided highway its entire length and parts are controlled-access. The bypass is an east-west route and the state route is a north-south.

While the road is a bypass around downtown Cleveland, it has come to be one of the heaviest traveled roads in the area, with industries and major businesses locating to it. It has been reported as the road where the most roadway accidents and fatalities occur in Bradley County.[3]

Route description

Aerial view of the cloverleaf interchange with APD-40 (US 64 Byp., SR 60) and US 64 (Inman Street, Waterlevel Highway)

APD-40 begins at the exit 20 interchange on Interstate 75 (I-75) as US 64 Byp. Beginning as controlled-access, it rounds a minor curve to the southeast and enters a long straightaway on the edge of the city limits of Cleveland, and comes to an interchange first with the Cherokee Gateway and then US 11/US 64 (South Lee Highway). About 2.5 miles (4.0 km) from the Interstate, the freeway ends and the road enters South Cleveland, passing several major industries and crossing a Norfolk Southern Railway. It then crosses Lead Mine ridge, junctions at an interchange with Blue Springs Road and crosses another Norfolk Southern railroad. The road travels for about a mile through a business and residential area before intersecting with McGrady Drive, which is a connector to SR 60 (Dalton Pike).The road then curves sharply to the northeast and enters a "semi-controlled access" straightaway interchanging with SR 74 (Spring Place Road) and bypassing Cleveland to the east. It is again on the edge of the city limits here. About a mile later, APD-40 again enters a freeway, intersecting with US 64 in a cloverleaf interchange and becoming SR 60. The road curves slightly to the northwest and interchanges with Benton Pike. It then interchanges with Overhead Bridge Road, crosses a Norfolk Southern line, and finally interchanges with 20th Street NE, before curving again to the northwest where the freeway ends and the road becomes 25th Street, entering into the metropolis of Cleveland. The road intersects with US 11 (Ocoee Street) about a half mile (0.8 km) later.[1][4][5]

History

APD-40 was originally planned and built to relieve congestion of traffic in downtown Cleveland. The majority of the road was built in the early 1970s.[6]

The first section, which was between the interstate and South Lee Highway was built in 1968.[7] The road was extended to Blue Springs Road in 1970 and to US 64 from 1971 to 1972. Construction on the final section between US 64 and the north end began in 1972, but was delayed multiple times, due to inability to meet financial goals. It was completed and opened in early 1974.[8] This section was not in the original plan; the original plan called for the road to end at US 64, but it was decided to extend it to US 11 (Ocoee Street) and 25th Street NE. SR 60 originally turned south about 1⁄4 mile (400 m) past the interchange with I-75 and went directly to downtown, but was moved to 25th Street NW and the section of APD-40 to US 64 after opening.[7]

In May 2013, the Tennessee Department of Transportation (TDOT) began a project to rework the interchange with I-75.[9] The original route narrowed at the interchange, and crossed the freeway on a two-lane bridge.[9] The project was declared complete on December 16, 2015. The old bridge was replaced with a six-lane bridge, and the ramps were rebuilt and widened, with turn lanes added.[10]

Construction began on a new interchange with the newly constructed Cherokee Gateway located about midway between I-75 and South Lee Highway in 2015.[11] The interchange connects to the Spring Branch Industrial Park, and was completed in 2017.[12] The interchange was named in honor of Cleveland's mayor Tom Rowland.[13]

Major intersections

The entire route is in Bradley County. [5]

Location[5]mikmDestinationsNotes
Cleveland0.000.00
US 64 Byp. begin (SR 311 begin) / US 74 west / I-75 – Knoxville, Chattanooga		Interchange; clockwise terminus of APD-40; clockwise end of US 64 Byp./US 74 overlap; I-75 exit 20; road continues west as Pleasant Grove Road
Cherokee GatewayInterchange
US 11 (SR 2) / US 64 – ClevelandInterchange
Blue Springs Road – Red Clay State Historic AreaInterchange
SR 60 south (McGrady Drive) – Dalton Ga.Clockwise end of SR 60 overlap
East Cleveland SR 74 (Spring Place Road)Interchange

US 64 Byp. end (SR 311 end) / US 74 east / US 64 (SR 40) – Ocoee, Cleveland		Interchange; counterclockwise end of US 64 Byp. overlap
Benton PikeInterchange
ClevelandOverhead Bridge RoadInterchange
20th Street NEInterchange
9.315.0 SR 60 north (25th Street NW) / US 11 (Ocoee Street) – AthensCounterclockwise terminus of APD-40; counterclockwise end of SR 60 overlap; road continues west as SR 60 (25th Street NW)
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1 2 Google (July 7, 2014). "APD-40" (Map). Google Maps. Google. Retrieved July 7, 2014.
  2. ↑ Appalachian Regional Commission (September 30, 2012). "ADHS Approved Corridors and Termini". Appalachian Regional Commission. Archived from the original on March 5, 2012. Retrieved July 7, 2014.
  3. ↑ "Fatal Car Crashes and Road Traffic Accidents in Cleveland, Tennessee, 1975–2011". Citydata.com. Advameg. December 31, 2011. Retrieved November 16, 2014.
  4. ↑ Tennessee Department of Transportation (2013). Official Transportation Map (PDF) (Map). 1 in:10 mi. Nashville: Tennessee Department of Transportation. § E11. Retrieved July 7, 2014.
  5. 1 2 3 Cleveland Chamber of Commerce (2013). City Limits Map (Map). Scale not given. Cleveland, TN: Cleveland Chamber of Commerce. Retrieved July 7, 2014.
  6. ↑ "Bridge Statistics for Cleveland, Tennessee (TN) - Condition, Traffic, Stress, Structural Evaluation, Project Costs". Citydata.com. Advameg. Retrieved November 16, 2014.
  7. 1 2 Long Engineering (June 2009). "Interchange Justification Study for the Tennessee Department of Transportation Project Planning Division: APD-40 Proposed Interchange Between Exit 20 at I-75 and South Lee Highway (SR 2/US 11) Bradley County" (PDF). Tennessee Department of Transportation.
  8. ↑ Davis, David A. (November 22, 1973). "Appalachian Highway Finally Completed, After Six Long Years". Cleveland Daily Banner. Retrieved November 16, 2014.
  9. 1 2 Davis, David (June 14, 2013). "TDOT Awards Exit 20 Project". Cleveland Daily Banner. Archived from the original on December 13, 2013. Retrieved March 15, 2014.
  10. ↑ Leach, Paul (December 16, 2015). "Cleveland Leaders Celebrate Exit 20 Makeover". Chattanooga Times Free Press. Retrieved December 23, 2015.
  11. ↑ Love, Joyanna (February 15, 2015). "Work on 4 Projects near Exit 20 Continues". Cleveland Daily Banner. Retrieved December 23, 2015.
  12. ↑ "TDOT Celebrates Completion of APD-40/SR-311 Interchange in Bradley County". May 12, 2017. Retrieved July 7, 2017.
  13. ↑ Leach, Paul (October 21, 2014). "Planned Interchange to Be Named for Cleveland Mayor". Chattanooga Times Free Press. Retrieved November 16, 2014.

Route map: Google

KML is from Wikidata
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.