Sensitivity and specificity

Sensitivity and specificity are statistical measures of the performance of a binary classification test, also known in statistics as classification function:

Another way to understand in the context of medical tests is that sensitivity is the extent to which true positives are not missed/overlooked (so false negatives are few) and specificity is the extent to which positives really represent the condition of interest and not some other condition being mistaken for it (so false positives are few). Thus a highly sensitive test rarely overlooks a positive (for example, showing "nothing bad" despite something bad existing); a highly specific test rarely registers a positive for anything that is not the target of testing (for example, finding one bacterial species when another closely related one is the true target); and a test that is highly sensitive and highly specific does both, so it "rarely overlooks a thing that it is looking for" and it "rarely mistakes anything else for that thing." Because most medical tests do not have sensitivity and specificity values above 99%, "rarely" does not equate to certainty. But for practical reasons, tests with sensitivity and specificity values above 90% have high credibility, albeit usually no certainty, in differential diagnosis.

Sensitivity therefore quantifies the avoiding of false negatives, and specificity does the same for false positives. For any test, there is usually a trade-off between the measures – for instance, in airport security since testing of passengers is for potential threats to safety, scanners may be set to trigger alarms on low-risk items like belt buckles and keys (low specificity), in order to increase the probability of identifying dangerous objects and minimize the risk of missing objects that do pose a threat (high sensitivity). This trade-off can be represented graphically using a receiver operating characteristic curve. A perfect predictor would be described as 100% sensitive, meaning all sick individuals are correctly identified as sick, and 100% specific, meaning no healthy individuals are incorrectly identified as sick. In reality, however, any non-deterministic predictor will possess a minimum error bound known as the Bayes error rate.

Definitions

Terminology and derivations
from a confusion matrix
(number of) positive samples (P)
(number of) negative samples (N)
(number of) true positive (TP)
eqv. with hit
(number of) true negative (TN)
eqv. with correct rejection
(number of) false positive (FP)
eqv. with false alarm, Type I error
(number of) false negative (FN)
eqv. with miss, Type II error

sensitivity or true positive rate (TPR)
eqv. with hit rate, recall
specificity (SPC) or true negative rate
precision or positive predictive value (PPV)
negative predictive value (NPV)
fall-out or false positive rate (FPR)
false negative rate (FNR)
false discovery rate (FDR)

accuracy (ACC)
F1 score
is the harmonic mean of precision and sensitivity
Matthews correlation coefficient (MCC)
Informedness
Markedness

Sources: Fawcett (2006) and Powers (2011).[2][3]

Application to screening study

Imagine a study evaluating a new test that screens people for a disease. Each person taking the test either has or does not have the disease. The test outcome can be positive (classifying the person as having the disease) or negative (classifying the person as not having the disease). The test results for each subject may or may not match the subject's actual status. In that setting:

In general, Positive = identified and negative = rejected. Therefore:

Confusion matrix

Let us consider a group with P positive instances and N negative instances of some condition. The four outcomes can be formulated in a 2×2 contingency table or confusion matrix, as follows:

True condition Accuracy (ACC) = Σ True positive + Σ True negative/Σ Total population
Total population Condition positive Condition negative Prevalence = Σ Condition positive/Σ Total population
Predicted
condition
Predicted condition
positive
True positive False positive
(Type I error)
Positive predictive value (PPV), Precision = Σ True positive/Σ Predicted condition positive False discovery rate (FDR) = Σ False positive/Σ Predicted condition positive
Predicted condition
negative
False negative
(Type II error)
True negative False omission rate (FOR) = Σ False negative/Σ Predicted condition negative Negative predictive value (NPV) = Σ True negative/Σ Predicted condition negative
DiagnosticTesting Diagram.svg
About this image
True positive rate (TPR), Recall, Sensitivity, probability of detection = Σ True positive/Σ Condition positive False positive rate (FPR), Fall-out, probability of false alarm = Σ False positive/Σ Condition negative Positive likelihood ratio (LR+) = TPR/FPR Diagnostic odds ratio (DOR) = LR+/LR− F1 score = 2/1/recall+1/precision
False negative rate (FNR), Miss rate = Σ False negative/Σ Condition positive True negative rate (TNR), Specificity (SPC) = Σ True negative/Σ Condition negative Negative likelihood ratio (LR−) = FNR/TNR

Sensitivity

Sensitivity refers to the test's ability to correctly detect patients who do have the condition.[4] In the example of a medical test used to identify a disease, the sensitivity of the test is the proportion of people who test positive for the disease among those who have the disease. Mathematically, this can be expressed as:

A negative result in a test with high sensitivity is useful for ruling out disease.[4] A high sensitivity test is reliable when its result is negative, since it rarely misdiagnoses those who have the disease. A test with 100% sensitivity will recognize all patients with the disease by testing positive. A negative test result would definitively rule out presence of the disease in a patient.

A positive result in a test with high sensitivity is not useful for ruling in disease. Suppose a 'bogus' test kit is designed to show only one reading, positive. When used on diseased patients, all patients test positive, giving the test 100% sensitivity. However, sensitivity by definition does not take into account false positives. The bogus test also returns positive on all healthy patients, giving it a false positive rate of 100%, rendering it useless for detecting or "ruling in" the disease.

Sensitivity is not the same as the precision or positive predictive value (ratio of true positives to combined true and false positives), which is as much a statement about the proportion of actual positives in the population being tested as it is about the test.

The calculation of sensitivity does not take into account indeterminate test results. If a test cannot be repeated, indeterminate samples either should be excluded from the analysis (the number of exclusions should be stated when quoting sensitivity) or can be treated as false negatives (which gives the worst-case value for sensitivity and may therefore underestimate it).

Specificity

Specificity relates to the test's ability to correctly detect patients without a condition. Consider the example of a medical test for diagnosing a disease. Specificity of a test is the proportion of healthy patients known not to have the disease, who will test negative for it. Mathematically, this can also be written as:

A positive result in a test with high specificity is useful for ruling in disease. The test rarely gives positive results in healthy patients. A test with 100% specificity will read negative, and accurately exclude disease from all healthy patients. A positive result signifies a high probability of the presence of disease.[5]

A test with a higher specificity has a lower type I error rate.

Graphical illustration

Medical examples

In medical diagnosis, test sensitivity is the ability of a test to correctly identify those with the disease (true positive rate), whereas test specificity is the ability of the test to correctly identify those without the disease (true negative rate). If 100 patients known to have a disease were tested, and 43 test positive, then the test has 43% sensitivity. If 100 with no disease are tested and 96 return a negative result, then the test has 96% specificity. Sensitivity and specificity are prevalence-independent test characteristics, as their values are intrinsic to the test and do not depend on the disease prevalence in the population of interest.[6] Positive and negative predictive values, but not sensitivity or specificity, are values influenced by the prevalence of disease in the population that is being tested. These concepts are illustrated graphically in this applet Bayesian clinical diagnostic model which show the positive and negative predictive values as a function of the prevalence, the sensitivity and specificity.

Misconceptions

It is often claimed that a highly specific test is effective at ruling in a disease when positive, while a highly sensitive test is deemed effective at ruling out a disease when negative.[7][8] This has led to the widely used mnemonics SPIN and SNOUT, according to which a highly SPecific test, when Positive, rules IN disease (SP-P-IN), and a highly 'SeNsitive' test, when Negative rules OUT disease (SN-N-OUT). Both rules of thumb are, however, inferentially misleading, as the diagnostic power of any test is determined by both its sensitivity and its specificity.[9][10][11]

The tradeoff between Specificity and Sensitivity is explored in ROC analysis as a trade off between TPR and FPR (that is Recall and Fallout).[2] Giving them equal weight optimizes Informedness = Specificity+Sensitivity-1 = TPR-FPR, the magnitude of which gives the probability of an informed decision between the two classes (>0 represents appropriate use of information, 0 represents chance-level performance, <0 represents perverse use of information).[3]

Sensitivity index

The sensitivity index or d' (pronounced 'dee-prime') is a statistic used in signal detection theory. It provides the separation between the means of the signal and the noise distributions, compared against the standard deviation of the noise distribution. For normally distributed signal and noise with mean and standard deviations and , and and , respectively, d' is defined as:

[12]

An estimate of d' can be also found from measurements of the hit rate and false-alarm rate. It is calculated as:

d' = Z(hit rate) – Z(false alarm rate),[13]

where function Z(p), p [0,1], is the inverse of the cumulative Gaussian distribution.

d' is a dimensionless statistic. A higher d' indicates that the signal can be more readily detected.

Worked example

A worked example
A diagnostic test with sensitivity 67% and specificity 91% is applied to 2030 people to look for a disorder with a population prevalence of 1.48%
Patients with bowel cancer
(as confirmed on endoscopy)
Condition positive Condition negative
Fecal
occult
blood

screen
test
outcome
Test
outcome
positive
True positive
(TP) = 20
False positive
(FP) = 180
Positive predictive value
= TP / (TP + FP)
= 20 / (20 + 180)
= 10%
Test
outcome
negative
False negative
(FN) = 10
True negative
(TN) = 1820
Negative predictive value
= TN / (FN + TN)
= 1820 / (10 + 1820)
99.5%
Sensitivity
= TP / (TP + FN)
= 20 / (20 + 10)
67%
Specificity
= TN / (FP + TN)
= 1820 / (180 + 1820)
= 91%

Related calculations

Hence with large numbers of false positives and few false negatives, a positive screen test is in itself poor at confirming the disorder (PPV = 10%) and further investigations must be undertaken; it did, however, correctly identify 66.7% of all cases (the sensitivity). However as a screening test, a negative result is very good at reassuring that a patient does not have the disorder (NPV = 99.5%) and at this initial screen correctly identifies 91% of those who do not have cancer (the specificity).

Estimation of errors in quoted sensitivity or specificity

Sensitivity and specificity values alone may be highly misleading. The 'worst-case' sensitivity or specificity must be calculated in order to avoid reliance on experiments with few results. For example, a particular test may easily show 100% sensitivity if tested against the gold standard four times, but a single additional test against the gold standard that gave a poor result would imply a sensitivity of only 80%. A common way to do this is to state the binomial proportion confidence interval, often calculated using a Wilson score interval.

Confidence intervals for sensitivity and specificity can be calculated, giving the range of values within which the correct value lies at a given confidence level (e.g., 95%).[14]

Terminology in information retrieval

In information retrieval, the positive predictive value is called precision, and sensitivity is called recall. Unlike the Specificity vs Sensitivity tradeoff, these measures are both independent of the number of true negatives, which is generally unknown and much larger than the actual numbers of relevant and retrieved documents. This assumption of very large numbers of true negatives versus positives is rare in other applications.[3]

The F-score can be used as a single measure of performance of the test for the positive class. The F-score is the harmonic mean of precision and recall:

In the traditional language of statistical hypothesis testing, the sensitivity of a test is called the statistical power of the test, although the word power in that context has a more general usage that is not applicable in the present context. A sensitive test will have fewer Type II errors.

See also

References

  1. "Detector Performance Analysis Using ROC Curves – MATLAB & Simulink Example". www.mathworks.com. Retrieved 11 August 2016.
  2. 1 2 Fawcett, Tom (2006). "An Introduction to ROC Analysis". Pattern Recognition Letters. 27 (8): 861–874. doi:10.1016/j.patrec.2005.10.010.
  3. 1 2 3 Powers, David M W (2011). "Evaluation: From Precision, Recall and F-Measure to ROC, Informedness, Markedness & Correlation" (PDF). Journal of Machine Learning Technologies. 2 (1): 37–63.
  4. 1 2 Altman, D. G.; Bland, J. M. (11 June 1994). "Statistics Notes: Diagnostic tests 1: sensitivity and specificity". BMJ. 308 (6943): 1552. PMC 2540489Freely accessible. PMID 8019315. doi:10.1136/bmj.308.6943.1552 via www.bmj.com.
  5. "SpPins and SnNouts". Centre for Evidence Based Medicine (CEBM). Retrieved 26 December 2013.
  6. Mangrulkar, Rajesh. "Diagnostic Reasoning I and II". Retrieved 24 January 2012.
  7. "Evidence-Based Diagnosis". Michigan State University.
  8. "Sensitivity and Specificity". Emory University Medical School Evidence Based Medicine course.
  9. Baron, JA (Apr–Jun 1994). "Too bad it isn't true.....". Medical decision making : an international journal of the Society for Medical Decision Making. 14 (2): 107. PMID 8028462. doi:10.1177/0272989X9401400202.
  10. Boyko, EJ (Apr–Jun 1994). "Ruling out or ruling in disease with the most sensitive or specific diagnostic test: short cut or wrong turn?". Medical decision making : an international journal of the Society for Medical Decision Making. 14 (2): 175–179. PMID 8028470. doi:10.1177/0272989X9401400210.
  11. Pewsner, D; Battaglia, M; Minder, C; Marx, A; Bucher, HC; Egger, M (Jul 24, 2004). "Ruling a diagnosis in or out with "SpPIn" and "SnNOut": a note of caution". BMJ (Clinical research ed.). 329 (7459): 209–13. PMC 487735Freely accessible. PMID 15271832. doi:10.1136/bmj.329.7459.209.
  12. Gale, SD; Perkel, DJ (Jan 20, 2010). "A basal ganglia pathway drives selective auditory responses in songbird dopaminergic neurons via disinhibition". The Journal of neuroscience : the official journal of the Society for Neuroscience. 30 (3): 1027–1037. PMC 2824341Freely accessible. PMID 20089911. doi:10.1523/JNEUROSCI.3585-09.2010.
  13. Macmillan, Neil A.; Creelman, C. Douglas (15 September 2004). Detection Theory: A User's Guide. Psychology Press. p. 7. ISBN 978-1-4106-1114-7.
  14. "Diagnostic test online calculator calculates sensitivity, specificity, likelihood ratios and predictive values from a 2x2 table – calculator of confidence intervals for predictive parameters". medcalc.org.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.