Transport in Australia

There are many forms of transport in Australia. Australia is highly dependent on road transport. There are more than 300 airports with paved runways. Passenger rail transport includes widespread commuter networks in the major capital cities with more limited intercity and interstate networks. The Australian mining sector is reliant upon rail to transport its product to Australia's ports for export.

Roads

Road transport is an essential element of the Australian transport network, and an enabler of the Australian economy. There is a heavy reliance on road transport due to Australia's large area and low population density in considerable parts of the country.^[1]

Another reason for the reliance upon roads is that the Australian rail network has not been sufficiently developed for a lot of the freight and passenger requirements in most areas of Australia. This has meant that goods that would otherwise be transported by rail are moved across Australia via road trains. Almost every household owns at least one car, and uses it most days.^[2]

Australia has the second highest level of car ownership in the world. It has three to four times more road per capita than Europe and seven to nine times more than Asia. Australia also has the third highest per capita rate of fuel consumption in the world. Melbourne is the most car-dependent city in Australia, according to a data survey in the 2010s. Having over 110,000 more cars driving to and from the city each day than Sydney. Perth, Adelaide and Brisbane are rated as being close behind. All these capital cities are rated among the highest in this category in the world (car dependency).^[3] The distance travelled by car (or similar vehicle) in Australia is among the highest in the world, being exceeded by USA and Canada.^[1]

There are 3 different categories of Australian roads. They are federal highways, state highways and local roads. The road network comprises a total of 913,000 km broken down into:^[4]

• paved: 353,331 km (including 3,132 km of expressways)
• unpaved: 559,669 km (1996 estimate)

Victoria has the largest network, with thousands of arterial (major, primary and secondary) roads to add.

The majority of road tunnels in Australia have been constructed since the 1990s to relieve traffic congestion in metropolitan areas, or to cross significant watercourses.

Public transport in Australia

Commuter rail

Sydney, Melbourne, Brisbane, Perth and Adelaide have extensive commuter rail networks which have grown and expanded over time. Australian commuter rail typically operates with bidirectional all day services with Sydney and Melbourne's systems operating with much higher frequencies, particularly in their underground cores. Sydney Trains operates the busiest system in the country with approximately 1 million trips per day. Metro Trains Melbourne operates a larger system albeit with a lower number of trips.

Trams and light rail

Trams have historically operated in many Australian towns and cities, with the majority of these being shut down before the 1970s in the belief that more widespread car ownership would render them unnecessary. Melbourne is a major exception and today has the largest tram network of any city in the world. Adelaide has also retained one tram service - the Glenelg Tram that runs from Hindmarsh through the CBD to Glenelg Beach. Trams had operated in a number of major regional cities including Ballarat, Bendigo, Brisbane, Broken Hill, Fremantle, Geelong, Hobart, Kargoorlie, Launceston, Maitland, Newcastle, Perth, Rockhampton, Sorrento, Sydney and St Kilda.

A modern light rail system opened in Sydney in 1997 with the conversion of a disused section of a freight railway line into what is now part of the Dulwich Hill Line. A second CBD and South East Light Rail line in Sydney is currently under construction and is due to open in 2019. A light rail system opened on the Gold Coast in 2014. Other light rail systems are scheduled to open in 2018-19 in Newcastle and Canberra.

Rapid transit

Major cities in Australia do not have full-fledged rapid transit systems, however a driverless rapid transit line serving Sydney's north-west is currently under construction. Early works have also begun for an extension through the Sydney Central Business District and the south-west. Sydney, Melbourne, Brisbane and Perth's commuter systems are all partially underground and reflect some aspects of typical rapid transit systems, particularly in the city centres.

Intra-city public transport networks

The following table presents an overview of multi-modal intra-city public transport networks in Australia's larger cities. The only Australian capital cities without multi-modal networks are Canberra and Darwin, which rely entirely on buses. Canberra is building a light rail line, which will link with existing bus services, and is scheduled to open in 2018.^[5] The table does not include tourist or heritage transport modes (such as the private monorail at Sea World or the tourist Victor Harbor Horse Drawn Tram).

City	Overview	Integrated Network Name	Buses	Urban rail/Commuter rail[6]	Light rail[7]	Watercraft[8]	Rapid transit
Adelaide	Public transport in Adelaide	Adelaide Metro	Yes	Limited	Yes
Brisbane	Public transport in Brisbane	Translink	Yes	Yes		Yes
Canberra	Public transport in Canberra		Yes		Under constructionP1
Darwin	Public transport in Darwin		Yes			Limited
Gold Coast	Public transport on the Gold Coast	Translink	Yes	Yes	Yes
Hobart	Transport in Hobart	Metro	Yes			Yes
Melbourne	Public transport in Melbourne	Public Transport Victoria	Yes	Yes	Yes	Limited
Newcastle	Transport in Newcastle	"Transport"	Yes	Limited	PlannedP2	Limited
Perth	Public transport in Perth	Transperth	Yes	Yes		Yes
Sydney	Public transport in Sydney	"Transport"	Yes	Yes	Yes	Yes	Under constructionP3

Notes

• P1 - Canberra light rail network - Planned for 2019
• P2 - Newcastle Light Rail - From 2017 under construction, open in 2019^[9]
• P3 - Sydney Metro - Construction of the first section began in 2014 with an estimated completion date of 2019^[10]

Intercity rail transport

The railway network is large, comprising a total of 33,819 km (2,540 km electrified) of track: 3,719 km broad gauge, 15,422 km standard gauge, 14,506 km narrow gauge and 172 km dual gauge. Rail transport started in the various colonies at different dates. Privately owned railways started the first lines, and struggled to succeed on a remote, huge, and sparsely populated continent, and government railways dominated. Although the various colonies had been advised by London to choose a common gauge, the colonies ended up with different gauges.

Inter-state rail services

The Great Southern Rail, operates three trains: the Indian Pacific (Sydney-Adelaide-Perth), The Ghan (Adelaide-Alice Springs-Darwin) and The Overland (Melbourne-Adelaide).^[11] NSW owned NSW TrainLink services link Brisbane, Canberra and Melbourne to Sydney. Since the extension of the Ghan from Alice Springs to Darwin was completed in 2004, all mainland Australian capital cities are linked by standard gauge rail, for the first time.

Intra-state and city rail services

There are various state and city rail services operated by a combination of government and private entities, the most prominent of these include V/Line (regional trains and coaches in Victoria); Metro Trains Melbourne (suburban services in Melbourne); NSW TrainLink (regional trains and coaches in New South Wales); Sydney Trains (suburban services in Sydney); Queensland Rail (QR) operating long distance Traveltrain services and the City network in South-East Queensland, and Transwa operating train and bus services in Western Australia.

In Tasmania, 'TasRail' operates a short haul narrow gauge freight system, that carries inter-modal and bulk mining goods. TasRail is government owned (by the State of Tasmania) and is going through a significant below and above rail upgrades with new locomotives and wagons entering service. Significant bridge and sleeper renewal has also occurred. The Tasmanian Government also operates the 'West Coast Wilderness Railway' as a tourist venture over an isolated length of track on Tasmania's West Coast.

Mining railways

Six heavy-duty mining railways carry iron ore to ports in the northwest of Western Australia. These railways carry no other traffic, and are isolated by deserts from all other railways. The lines are standard gauge and are built to the heaviest US standards. Each line is operated by one of either BHP Billiton, Rio Tinto, Fortescue Metals Group and Hancock Prospecting.

A common carrier railway was proposed to serve the port of Oakajee just north of Geraldton, but this was later cancelled after a collapse in the iron ore price.

Cane railways

In Queensland about 15 sugar mills have narrow gauge (2 ft/​610 mm gauge) cane tramways that deliver sugar cane to the mills.

Pipelines

There are several pipeline systems including:

• Crude oil: 2,500 km
• Petroleum products: 500 km
• Natural gas: 5,600 km
• Water
  • Perth to Kalgoorlie - Goldfields Water Supply Scheme
  • Morgan on the Murray River to Whyalla, Port Lincoln - Morgan-Whyalla pipeline
  • Mannum on the Murray River to Adelaide - Mannum-Adelaide pipeline
  • Waranga Western Channel, near Colbinabbin to Bendigo and Ballarat - Goldfields Superpipe

Projects under construction or planned:
Victoria

• Goulburn River to Sugarloaf Reservoir, Melbourne (North-South Pipeline, alternatively called the Sugarloaf Pipeline) - was connected to Melbourne in February 2010.^[12]
• Wimmera-Mallee Pipeline - construction commenced in November 2006 and was completed in April 2010.^[13]
• Melbourne to Geelong Pipeline - construction was completed in March 2012.^[14]
• Rocklands Reservoir to Grampian Headworks Pipeline (Hamilton - Grampians Pipeline) - construction commenced December 2008, expected completion in 2010.

Waterways

Between 1850 and 1940 paddle steamers were used extensively on the Murray-Darling Basin to transport produce, especially wool and wheat, to river ports such as Echuca, Mannum and Goolwa. However, the water levels of the inland waterways are highly unreliable, making the rivers impassable for large parts of the year. A system of locks was created largely to overcome this variability but the steamers were unable to compete with rail, and later, road transport. Traffic on inland waterways is now largely restricted to private recreational craft.^[15]

Ports and harbours

Mainland

General

• Adelaide, Brisbane, Cairns, Darwin, Fremantle, Geelong, Gladstone, Port Lincoln, Mackay, Melbourne, Newcastle, Portland, Sydney, Townsville, Wollongong

Iron ore

• Dampier
• Port Hedland
• Geraldton
• Oakajee - proposed 2006
• Esperance
• Port Lincoln - possible 2007

Tasmania

• Burnie
• Devonport
• Launceston
• Hobart

Merchant marine vessels

In 2006, the Australian fleet consisted of 53 ships of 1,000 gross register tons or over. The use of foreign registered ships to carry Australian cargoes between Australian ports is permitted under a permit scheme, with either Single Voyage Permit (SVP) or a Continuous Voyage Permit (CVP) being issued to ships.^[16] Between 1996 and 2002 the number of permits issued has increased by about 350 per cent.^[17]

Over recent years the number of Australian registered and flagged ships has greatly declined, from 75 ships in 1996 to less than 40 in 2007, by 2009 the number is now approaching 30. Marine unions blame the decline on the shipping policy of the Howard Government which permitted foreign ships to carry coastal traffic.^[18]

There have also been cases where locally operated ships have Australian flag from the vessel, registering it overseas under a flag of convenience, then hiring foreign crews who earn up to about half the monthly rate of Australian sailors.^[17] Such moves were supported by the Howard Government but opposed by maritime unions and the Australian Council of Trade Unions.^[19] The registration of the ships overseas also meant the earnings of the ships are not subject to Australian corporate taxation laws.^[18]

Statistics for the shipping industry of Australia
Total: 53 ships (1,000 gross register tons (GRT) or over)
Totalling: 1,361,000 GRT/1,532,874 tonnes deadweight (DWT)
Cargo ships
Bulk ships	17
Cargo ship	4
Container ships	1
Roll-on / roll-off ships	5
Tankers
Liquefied gas tanker ships	4
Chemical tanker ships	3
Petroleum tanker ships	6
Passenger ships
General passenger ships	6
Combined passenger/cargo	7
Foreign ownership and documentation Note: 17 of these are foreign-owned: Canada 1, France 3, Germany 3, Japan 1, Netherlands 2, Norway 1, Philippines 1, United Kingdom 2, United States 3. Australia has 34 vessels registered in other countries: Antigua and Barbuda 1, Bahamas 2, Bermuda 3, Fiji 1, Hong Kong 1, Liberia 2, Marshall Islands 2, Netherlands 1, New Zealand 2, Panama 3, Portugal 1, Singapore 7, Tonga 1, United Kingdom 3, United States 2, Vanuatu 2. 2006 estimates.
Source: This article contains material from the CIA World Factbook which, as a US government publication, is in the public domain.

Aviation

Major Australian airlines operating domestic routes are:

• Qantas
  • Jetstar (subsidiary)
• Virgin Australia
  • Tiger Airways Australia (subsidiary)

There are many airports around Australia paved or unpaved. A 2004 estimate put the number of airports at 448. The busiest airports in Australia are:

1. Sydney Airport Sydney, New South Wales SYD
2. Melbourne Airport Melbourne, Victoria MEL
3. Brisbane Airport Brisbane, Queensland BNE
4. Perth Airport Perth, Western Australia PER
5. Adelaide Airport Adelaide, South Australia ADL
6. Gold Coast Airport Gold Coast, Queensland OOL
7. Cairns Airport Cairns, Queensland CNS
8. Canberra Airport Canberra, Australian Capital Territory CBR
9. Hobart International Airport Hobart, Tasmania HBA
10. Darwin International Airport, Northern Territory DRW
11. Townsville Airport Townsville, Queensland TSV

Airports with paved runways

There are 305 airports with paved runways:

• Over 3,047 m (10,000 ft): 10
• 2,438 to 3,047 m (8,000 to 10,000 ft): 12
• 1,524 to 2,437 m (5,000 to 8,000 ft): 131
• 914 to 1,523 m (3,000 to 5,001 ft): 139
• Under 914 m (3,000 ft): 13 (2004 estimate)

Airports with unpaved runways

There are 143 airports with unpaved runways:

• 1,524 to 2,437 m (5,000 to 8,000 ft): 17
• 914 to 1,523 m (3,000 to 5,000 ft): 112
• Under 914 m (3,000 ft): 14 (2004 estimate)

Note:

sourced from CIA World Fact Book https://www.cia.gov/library/publications/the-world-factbook/index.html

Environmental impact

The environmental impact of transport in Australia is considerable. In 2009, transport emissions made up 15.3% of Australia's total greenhouse gas emissions. Between 1990 and 2009, transport emissions grew by 34.6%, the second-highest growth rate in emissions after stationary energy.^[20]

Australia subsidizes fossil fuel energy, keeping prices artificially low and raising greenhouse gas emissions due to the increased use of fossil fuels as a result of the subsidies. The Australian Energy Regulator and state agencies such as the New South Wales' Independent Pricing and Regulatory Tribunal set and regulate electricity prices, thereby lowering production and consumer cost.

See also

• Inland Railway
• Lonie Report

References

Sources

•  This article incorporates public domain material from the CIA World Factbook document "2000 edition".

External links

• Australia Transport Statistics
• Railway maps
• Driving time calculator for NSW
• Road map of Australia