Train dispatcher

Local dispatchers at work at the central station in Bohumín, Czech Republic, in August 2008

A train dispatcher is employed by a railroad to direct and facilitate the movement of trains over an assigned territory, which is usually part, or all, of a railroad operating division. The dispatcher is also responsible for cost effective movement of trains and other on-track railroad equipment to optimize physical (trains) and human resource (crews) assets.[1]

History

Charles Minot, a Division Superintendent on the Erie Railroad is credited with the first effort to control the movement of a train beyond the rule book and operating timetable, when, in September 1851, he sent a telegram to a railroad employee at another location directing that all trains be held at that point until the train Minot was riding could arrive.

From that beginning, a system of train dispatching evolved. The operating rule book, later standardized for all railroads, contained the basic rules for the operation of trains, such as the meaning of the all fixed, audible and hand signals; the form, format and meaning of train orders; and the duties and obligations of each class of employee. The operating, or official, timetable established train numbers and schedules; meeting points for those trains; showed the length of passing tracks at each station as well as indicating the locations where train orders might be issued and contained a variety of other information which might be necessary or useful to train crews operating trains over the territory covered.

Train orders supplemented the timetable and the rule book. They were addressed to a particular train or trains and directed that train or trains to do whatever the train dispatcher had decided needed to be done: meet another train, wait at specified locations, run late on its published schedule, be cautious under the circumstances described or numerous other actions.

Train dispatchers are required to be intimately familiar with the physical characteristics of the railroad territory for which they are responsible, as well as the operating capabilities of the locomotive power being used. Experienced train dispatchers learned the idiosyncrasies of the locomotive engineers and train conductors and melded that knowledge into the operating decisions made. An efficient train dispatcher could utilize the rule book, timetable, train orders and personal experience to move a large number of trains over the assigned territory with minimal delay to any train, even in single-track territory.

Initially, train dispatchers issued train orders using American Morse code over telegraph wires. Later, after the telephone was invented in 1876 and became common, most railroads constructed their own telephone systems, for internal communications, which the train dispatchers used to issue train orders. The last train order known to have been issued using Morse code was copied at Whitehall, Montana, on May 6, 1982, on the Burlington Northern Railroad.

Beginning before World War II and accelerating after it, most major railroads installed centralized traffic control (CTC) systems to control train movements. Using CTC, a train dispatcher could align track switches anywhere on the territory so that trains could move into and out of sidings without having to stop and hand throw switches. The train dispatcher could also control the trackside signals governing the movement of trains. Two-way radios enabled train dispatchers to communicate directly with train and engine crews. These capabilities eliminated the need for most train orders, but still required the oversight of a train dispatcher.

By Country

Australia - In Australia they are known as Train Controllers. Majority of Train Controllers are employed by Australian State and Federal Government organisations such as Australian Rail Track Corporation (ARTC), Queensland Rail, Sydney Trains, Public Transport Authority of Western Australia (PTA). The exceptions being privately operated Railways such as the ones found in the Pilbara region. The mining giants BHP Billiton, Rio Tinto, Fortesque Metals Group and now Roy Hill all operate their own Railways from Remote Operation Centres and employ high numbers of Train Controllers.

Canada - In Canada the train dispatcher is known as the Rail Traffic Controller (RTC). The two biggest employers of Rail Traffic Controller are Canadian National Railway and Canadian Pacific.

New Zealand - In New Zealand a Dispatcher is known as a Train Controller the same as in Australia. NZRail recently centralised all Train Control into a single Control centre located in the National Capital of Wellington on southern end of the North Island.

See also

References

  1. ↑ "Career Choices - Rail Traffic Controller". irtcanada.net. Retrieved 18 February 2010.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.