''tert''-Butyllithium

tert-Butyllithium
Names
Preferred IUPAC name
tert-Butyllithium
Identifiers
3D model (JSmol)
3587204
ChemSpider
ECHA InfoCard 100.008.939
EC Number 209-831-5
UN number 3394
Properties
LiC
4H
9
Molar mass 64.055 g mol−1
Appearance Colorless solid
Density 660 mg cm−3
Boiling point 36 to 40 °C (97 to 104 °F; 309 to 313 K)
Reacts
Acidity (pKa) 45–53
Hazards
GHS pictograms
GHS signal word DANGER
H225, H250, H260, H304, H314, H336, H411
P210, P222, P223, P231+232, P370+378, P422
NFPA 704
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g., propane Health code 4: Very short exposure could cause death or major residual injury. E.g., VX gas Reactivity code 4: Readily capable of detonation or explosive decomposition at normal temperatures and pressures. E.g., nitroglycerin Special hazard W: Reacts with water in an unusual or dangerous manner. E.g., cesium, sodiumNFPA 704 four-colored diamond
4
4
4
Flash point −6.6 °C (20.1 °F; 266.5 K)
Related compounds
Related compounds
 n-Butyllithium

sec-Butyllithium

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

tert-Butyllithium is a chemical compound with the formula (CH3)3CLi. As an organolithium compound, it has applications in organic synthesis since it is a strong base, capable of deprotonating many carbon acids, including benzene. tert-Butyllithium is available commercially as hydrocarbon solutions; it is not usually prepared in the laboratory. Its synthesis was first reported by R. B. Woodward in 1941.[1]

Structure and bonding

Like other organolithium compounds, tert-butyllithium is a cluster. Whereas n-butyllithium exists both as a hexamer and a tetramer, tert-Butyllithium exists as tetramer with a cubane structure. Bonding in organolithium clusters involves sigma delocalization and significant Li—Li bonding.[2]

The lithium–carbon bond in tert-butyllithium is highly polarized, having about 40 percent ionic character. The molecule reacts like a carbanion, as is represented by these two resonance structures.[3] (Given the polarity calculations on the C–Li bond, the "real" structure of a single molecule of t-butyllithium is likely a near-average of the two resonance contributors shown, in which the central carbon atom has a ~50% partial negative charge while the lithium atom has a ~50% partial positive charge.)

Chemical properties

Similar to n-butyllithium, tert-butyllithium can be used for the exchange of lithium with halogens and for the deprotonation of amines and activated C—H compounds.

This compound and other alkyllithium compounds are known to react with ether solvents; the half-life of tert-butyllithium is 60 minutes at 0 °C in diethyl ether, 40 minutes at −20 °C in tetrahydrofuran (THF),[4] and about 11 minutes at −70 °C in dimethoxyethane.[5] In this example, the reaction of tert-butyllithium with (THF) is shown:

To minimize degradation by these solvents, reactions involving tert-butyllithium are often conducted very low temperatures in special solvents, such as the Trapp solvent mixture.

Safety

tert-Butyllithium is a pyrophoric substance, meaning that it easily catches fire on exposure to air. (A precise definition of a pyrophoric material is one "that ignite[s] spontaneously in air at or below 54.55 °C (130.19 °F)".[6]) The solvents used in common commercial preparations are themselves flammable. While it is possible to work with this compound using cannula transfer, traces of tert-butyllithium at the tip of the needle or cannula may catch fire and clog the cannula with lithium salts. While some researchers take this "pilot light" effect as a sign that the product is "fresh" and has not degraded due to time or improper storage/handling, some workers prefer to enclose the needle tip or cannula in a short glass tube, which is flushed with an inert gas and sealed at each end with septa.[7] Serious laboratory accidents involving tert-butyllithium have occurred. For example, in 2008 a staff research assistant, Sheharbano Sangji, in the lab of Patrick Harran[8] at the University of California, Los Angeles, died after being severely burned by a fire ignited by tert-butyllithium.[9][10][11]

Large-scale reactions may lead to runaway reactions, fires, and explosions when tert-butyllithium is mixed with ethers such as diethyl ether, and tetrahydrofuran. The use of hydrocarbon solvents may be preferred.

Air-free techniques are important so as to prevent this compound from reacting violently with oxygen and moisture in the air:

t-BuLi + O2 → t-BuOOLi
t-BuLi + H2O → t-BuH + LiOH

References

  1. ↑ Bartlett, Paul D.; C. Gardner Swain; Robert B. Woodward (1941). "t-Butyllithium". J. Am. Chem. Soc. 63 (11): 3229–3230. doi:10.1021/ja01856a501.
  2. ↑ Elschenbroich, C. ”Organometallics” (2006) Wiley-VCH: Weinheim. ISBN 978-3-527-29390-2
  3. ↑ Organometallic reagents: sources of nucleophilic carbon for alcohol synthesis. K. P. C. Vollhardt, N. E. Schore: Organic Chemistry : Structure And Function. 3rd edition, 1999, §8.7.
  4. ↑ Stanetty, P; Koller, H.; Mihovilovic, M. (1992). "Directed ortho lithiation of phenylcarbamic acid 1,1-dimethylethyl ester (N-BOC-aniline). Revision and improvements". Journal of Organic Chemistry. 57 (25): 6833–6837. doi:10.1021/jo00051a030.
  5. ↑ Fitt, J. J.; Gschwend, H. E. (1984). "Reaction of n-, sec-, and tert-butyllithium with dimethoxyethane (DME): a correction". Journal of Organic Chemistry. 49: 209–210. doi:10.1021/jo00175a056.
  6. ↑ SEMI, standard F6-92, Guide for Secondary Containment of Hazardous Gas Piping Systems, as cited by ChemiCool.com
  7. ↑ Errington, R. M. (1997). Advanced practical inorganic and metalorganic chemistry (Google Books excerpt). London: Blackie Academic & Professional. pp. 47–48. ISBN 0-7514-0225-7.
  8. ↑ "Harran Lab: UCLA".
  9. ↑ Jyllian Kemsley (2009-01-22). "Researcher Dies After Lab Fire". Chemical & Engineering News.
  10. ↑ Jyllian Kemsley (2009-04-03). "Learning From UCLA: Details of the experiment that led to a researcher’s death prompt evaluations of academic safety practices". Chemical & Engineering News.
  11. ↑ Los Angeles Times, 2009-03-01
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.