Technical surveillance counter-measures

TSCM (technical surveillance counter-measures) is the original United States Federal government abbreviation denoting the process of bug-sweeping or electronic countersurveillance. It is related to ELINT, SIGINT and electronic countermeasures (ECM).

The United States Department of Defense defines a TSCM survey as a service provided by qualified personnel to detect the presence of technical surveillance devices and hazards and to identify technical security weaknesses that could aid in the conduct of a technical penetration of the surveyed facility. A TSCM survey will provide a professional evaluation of the facility's technical security posture and normally will consist of a thorough visual, electronic, and physical examination in and about the surveyed facility.

This definition is however lacking some of the technical scope involved. COMSEC (communications security), ITSEC (information technology security) and physical security are also a major part of the work in the modern environment. The advent of multimedia devices and remote control technologies allow huge scope for removal of massive amounts of data in very secure environments by the staff employed within, with or without their knowledge.

Technical Surveillance Countermeasures (TSCM) can best be defined as The systematic physical and electronic examination of a designated area by properly trained, qualified and equipped persons in an attempt to discover electronic eavesdropping devices, security hazards or security weaknesses.

Methodology

Radio frequencies

Most bugs transmit information, whether data, video, or voice, through the air by using radio waves. The standard counter-measure for bugs of this nature is to search for such an attack with a radio frequency (RF) receiver. Lab and even field-quality receivers are very expensive and a good, working knowledge of RF theory is needed to operate the equipment effectively. Counter-measures like burst transmission and spread spectrum make detection more difficult.

The timing of detection surveys and location scans is critical to success, and varies with the type of location being scanned. For permanent facilities, scans and surveys must take place during working hours to detect remotely switchable devices that are turned off during non-working hours to defeat detection.^[1]

Devices that do not emit radio waves

Instead of transmitting conversations, bugs may record them. Bugs that do not emit radio waves are very difficult to detect, though there are a number of options for detecting such bugs.

Very sensitive equipment could be used to look for magnetic fields, or for the characteristic electrical noise emitted by the computerized technology in digital tape recorders; however, if the place being monitored has many computers, photocopiers, or other pieces of electrical equipment installed, it may become very difficult. Items such as audio recorders can be very difficult to detect using electronic equipment. Most of these items will be discovered through a physical search.

Another method is using very sensitive thermal cameras to detect residual heat of a bug, or power supply, that may be concealed in a wall or ceiling. The device is found by locating a hot spot the device generates that can be detected by the thermal camera.

A method does exist to find hidden recorders, as these typically use a well known frequency for the clock which can never be totally shielded. A combination of existing techniques and resonance sweeps can often pick up even a defunct or "dead" bug in this way by measuring recent changes in the electromagnetic spectrum.

Technology used

Technology most commonly used for a bug sweep includes but is not limited to:

Broadband receivers to detect radiating hostile radio frequency transmissions in the near field.
Flashlight one of the most important tools to have beside a ladder for providing a competent sweep.
Frequency scanner with a range of antennas and filters for checking the electromagnetic spectrum for signals that should not be there.
Lens detectors to detect the lenses of wired or wireless concealed covert cameras.
Multimeters for general measurements of power supplies and device components.
Nonlinear junction detector (NLJD) to detect components associated with hidden eavesdropping devices.
Oscilloscope for visualisation of signals.
Spectrum analyzer and vector signal analyzer for more advanced analysis of threatening and non threatening RF signals.
Thermal imagers to help find hot spots and areas higher in temperature than the ambient area temperature. Finds heat generated from active electronic components.
Time-domain reflectometer (TDR) for testing the integrity of copper telephone lines and other communication cables.
Tools for manual disassembling of objects and walls in order to visually check their content. This is the most important, most laborious, least glamorous and hence most neglected part of a check.
Videoscopes to inspect small or inaccessible spaces, such as wall spaces, HVAC components, vehicle crevices, etc.
Portable x-ray machine for checking the inside of objects and walls.

References

↑ Braunig, Martha J. (1993). The Executive Protection Bible (1993 ed.). Aspen, Colorado: ESI Education Development Corporation. p. 147. ISBN 0-9640627-0-4.

External links

Listening In: Electronic Eavesdropping in the Cold War Era, US Department of State, Bureau of Diplomatic Security, 2008
A simple guide to TSCM
Technical Surveillance Countermeasures (TSCM): Protection from Prying Eyes and Ears

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.