Tanzer 10
| Development | |
|---|---|
| Designer | Richard Carter |
| Location | Canada |
| Year | 1980 |
| Builder(s) | Tanzer Industries |
| Boat | |
| Crew | Two |
| Draft | 6.67 ft (2.03 m) swing keel down |
| Hull | |
| Type | Masthead sloop |
| Construction | Fiberglass |
| LOA | 32.67 ft (9.96 m) |
| LWL | 27.50 ft (8.38 m) |
| Beam | 11.86 ft (3.61 m) |
| Hull Appendages | |
| Keel/Board Type | fixed conventional fin keel or swing keel |
The Tanzer 10 is a Canadian sailboat, that was designed by Richard Carter and first built in 1980.[1]
The design was later developed into the Tanzer 10.5.[1]
Production
The boat was built by Tanzer Industries Limited in Dorion, Quebec. The company entered bankruptcy in 1986 and production had ended by then.[1][2]
Design
The Tanzer 10 is a small recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig, a transom-hung rudder, wheel steering and a fixed fin keel or optionally a swing keel. The boat displaces 13,000 lb (5,897 kg) and carries 5,000 lb (2,268 kg) of ballast.[1]
The boat is powered by a Japanese-made Yanmar diesel engine. It has a pilothouse and inside steering.[1]
The fixed keel version has a draft of 5.92 ft (1.80 m), while the swing keel version has a draft of 6.67 ft (2.03 m) with the keel down and 2.00 ft (0.61 m) with the keel retracted.[1]
See also
Similar sailboats
References
- 1 2 3 4 5 6 Browning, Randy (2016). "Tanzer 10 sailboat specifications and details". sailboatdata.com. Retrieved 10 July 2016.
- ↑ Browning, Randy (2016). "Tanzer Industries Ltd, 1966-1986". sailboatdata.com. Retrieved 10 July 2016.