Suzuki Fronte

The Suzuki Fronte (Japanese: スズキ・フロンテ) is an automobile that was first introduced in March 1962 as a sedan version of the Suzulight Van. The nameplate remained in use for Suzuki's Kei car sedans as well as some other commercial-use vehicles until it was replaced by the Alto name (originally only used for commercial vehicles) in September 1988.

Fronte 360 (LC10)

360cc Era

Suzulight Fronte

Suzulight Fronte TLA (1962-63)

The Suzulight Van-based TLA Fronte was introduced in March 1962 as a passenger car version of the popular light van. The Suzulight Fronte was based on the earlier Suzulight SS series, itself a fairly straightforward copy of the even older Lloyd LP400, and as such had a transversely mounted two-cylinder, two-stroke engine driving the front wheels. Suspension was independent on all four wheels, with transverse double leafsprings on both axes.[1] 2,565 were built in the first year.[1] Power was 25 PS (18 kW) at 6000 rpm, from a unique engine (also called "TLA") with its cylinders cast separately rather than in a single block. Of 360 cc (64.0 × 56.0 mm) this method allowed for a lower production cost and better cooling, allowing Suzuki to price the TLA below the more spartan TL Van.[2] As with the light commercials on which it was based, the transmission was a three-speed manual with an unsynchronized first gear and a column-mounted shifter.[3]

After only one year's production of the TLA, the new FEA engine appeared, featuring the SELMIX automatic lubrication system, improved fuel economy and eliminated the need for pre-mixed gasoline for the two-stroke engine. Power was down somewhat, to 21 PS (15 kW). This was counteracted by the installation of a new, all-synchronized four-speed gearbox.

Late (1967) Suzulight Fronte

In May 1963, two of the recently introduced FE-powered Suzuki Frontes[4] came in first and second in their class at the inaugural Japanese Grand Prix (Class C1, for engines with less than 400 cc), with an average speed of 89.763 km/h (55.776 mph).[5][6] Two more Frontes came in fourth and eighth places.[7] The winning driver was Osamu Mochizuki (望月 修) who crossed the finish line just ahead of teammate Haruhisa Fujita (藤田 晴久), both a full minute ahead of the third-placed Subaru 360.[8] The fastest lap was also made by a Fronte, by eighth-place finisher Isamu Kawashima, who managed a lap speed of 90.72 km/h (56.37 mph) around the 6 km (3.7 mi) course.[8]

In October 1965 the further improved CCI engine (Cylinder Crank Injection), which further cut down oil consumption and startup smoke. The FEA-II engine also gained an extra horsepower, for a total of 22. The FEA-II also received a new front-end treatment, aping its bigger brother the Fronte 800. In 1966 this became known as the "New FEA" after another slight facelift.[9] By the end of its production run (1967), the Suzulight Fronte was beginning to look rather dated, especially at the rear end, and the chassis was positively archaic.

Fronte 360

Fronte 360 sedan
Overview
Production 03.1967–10.1970
Assembly Kosai Assembly Plant, Hamana-gun, Shizuoka, Japan
Body and chassis
Body style 2-door sedan
Layout RR layout
Powertrain
Engine
Transmission 4-speed manual
Dimensions
Wheelbase 1,960 mm (77.2 in)
Length 2,995 mm (117.9 in)
Width 1,295 mm (51.0 in)
Height 1,290 mm (50.8 in)
Curb weight 425 kg (937 lb)

The Suzuki Fronte 360 two-door sedan (chassis code LC10) was introduced in March 1967 to replace the earlier Suzulight Fronte.[10] The "Y-16", as the project had been known, had a rear engine and ten inch wheels for maximum packaging.[11] The car sprang from the 1961 "FC" project, also with a rear-engine but with rear-hinged doors, a reverse-angle rear window (à la the Ford Anglia) and an overall rakish profile.[12] This earlier stillborn project, called the "Suzulight Sports 360", was a reaction to the success of the rear-engined Subaru 360 and had a unique 360 cc two-cylinder engine. Even earlier (1960), there was an open two-seater prototype called the FA, with the same engine and layout as used in the FC.[13] Suzuki's new test track in Ryūyō was put to intense use for the development program, while tropical and cold weather testing was carried out in Thailand and on Hokkaido.[13] In the Japanese domestic market, the Fronte competed directly with the Mitsubishi Minica, Daihatsu Fellow, and the Subaru 360.

Its overall shape is of a roundish profile, soon nicknamed "Daruma" for a Japanese roly-poly doll - this is the smallest (and arguably the only Kei Jidosha) car to use the "coke bottle styling" which became popular in the United States for the 1965 model year. The wheelbase was 1,960 mm (77.2 in), the suspension independent with coil springs and the engine was an all new 356 cc three-cylinder air-cooled two-cycle unit which was also called the LC10. The transmission was a four-speed manual, originally with synchromesh on the top three gears only. In a break with Fronte's front-wheel drive traditions, the powertrain was placed transversely in the rear, as was becoming the norm for kei cars of the period. The LC10 Fronte was dubbed the "Queen of the keis" by Suzuki's marketing department[12] - a claim which may have influenced Subaru to name their 360 replacement the "Rex".[14]

1968 Fronte SS 360 as driven by Stirling Moss

The LC10 was introduced with great fanfare and a large marketing campaign, which included television commercials. First reaching dealerships on 27 May 1967, market response was immediate and strong. While the original target production was 3000 per month, this was soon nearly tripled. Monthly production remained above 8000 until the end of the LC10's life.[15] A new, additional factory in Iwata was opened in August 1967 to add supplementary capacity.[13] While in overall a fairly simple and light car, the triple carburettors were awkwardly located at the front of the engine, behind the rear seat. To adjust them, a mechanic would have to reach through a small egg-shaped opening from the rear seat.[12] Another complaint touched on the car's near absence of luggage space.[16] The rear lights and the front indicators used the same lenses, only of different colors. There was even a brochure made of a US-market Fronte 360, complete with miles-per-hour speedo and uncovered sealed-beam headlights, but most likely none were brought over.[17] The Fronte soon received a very minor update reflecting stricter safety laws; as of October 1968 it sported a driver's side integrated headrest, seat belts up front, and turn signal flashers on all four corners.[18]

In November 1968 came the Suzuki Fronte SS 360 with 36 hp (27 kW), with the sportier yet Suzuki Fronte SSS to follow in April 1970. The SS was the quickest kei-car yet, managing to break the twenty second barrier in reaching 400 metres from standing with 19.95 seconds.[10] The car had different wheels and also featured a rev counter.[12] It was introduced with an unusual marketing stunt: racing driver Stirling Moss and TT-winning motorcycle racer Mitsuo Itoh were engaged to drive two SS Frontes (one red, one pale yellow) on a high-speed demonstration journey along Italy's 750 km (466 mi) Autostrada del Sole leading from Milan to Napoli. In the end, the average speed attained was 122.44 km/h (76.08 mph), respectable for a car with an engine smaller than those of most motorcycles.[19] The original car currently resides in Suzuki's museum in Hamamatsu. In 1969 the "SS Standard" model also appeared, with the powerful engine but with a minimum of trim, sepcifically intended for competition purposes.

1970 Suzuki Fronte SSS

There was also an export version introduced in January 1969, the Suzuki Fronte 500 with the engine enlarged to 475 cc. This was only built in De Luxe trim.[13] The 500 produces 29 PS (21 kW) at 6000 rpm, four more than does the original 360 export version. In May 1969 the Fronte received its first real facelift. The dashboard was modernized by two square gauges instead of a large oval one, the ignition key was moved from the dashboard to the steering column and the two-tone interior was changed to simply black.[13] Externally, the decorative trim pieces in the front grille and on the air inlets at the rear were replaced by real grilles. First gear was also synchronized, unlike on earlier cars. In July 1969 the Fronte S appeared, which offered the SS equipment but with the more economical 25 PS engine.[20] Another facelift took place in April 1970, when the grille became more ornate and the sporting version was rebaptized "SSS". Marketing materials referred to this version as the "New Fronte". Two new engines of 31 and 34 PS (23 and 25 kW) were installed, while the original 25 PS version was discontinued. The more powerful version was installed in the Hi-Super DX and S versions.[21] Production ended in October 1970, in advance of the succeeding "Stingray" Fronte.[10]

Fronte Van/Estate/Custom

1969 LS10 Fronte Van

January 1969 saw the arrival of the Suzuki Fronte Van three-door wagon (LS10) as a successor to the Suzulight FE-series Van which had been built alongside the LC10 for a couple of years. The LS10 featured a conventional drivetrain lay-out (engine in front, rear wheel drive), a rear rigid axle with leaf springs and a wheelbase of 1,995 mm (78.5 in). Design was square in style, radically different from the Fronte sedan. To begin with, the rear opening was a single unit, hinged at the top. The engine was the air-cooled 356 cc LC10 two-cycle three-cylinder unit, here detuned to 25 hp (19 kW) for a top speed of 105 km/h.[22] The Van (and its subsequent siblings) has MacPherson struts in front and semi-elliptic leaf springs in rear.[23] Unusually for Japanese cars, the spare wheel was mounted in the engine compartment - something more commonly seen in French cars - to help free up more space for luggage.

By July 1969 a three-door wagon version intended for private use arrived, the LS11 Suzuki Fronte Estate, to give passenger car buyers a model with more luggage room without the indignity of having to buy a commercial vehicle.[20] The Estate had the same top-hinged rear opening, but featured a more comfortable, while still folding, rear seat. There was also a folding luggage shelf in the trunk.[23] Sops to safety, already somewhat better than the regular Fronte because of the engine location and the driver's seat being located farther back, included an anti-glare dashboard and a round horn pad in the steering wheel.

In June 1970 the Estate model was succeeded by the Suzuki Fronte Custom. The Custom had the same wagon body style but lacked a top opening at the rear.[30] While it received a new grille it came with a downwards opening trunk lid only, possibly to please the private customer who found the luggage room in the rear-engined Fronte too small by disguising the fact that a wagon (not popular in Japan in those days) was involved. Thus, the Fronte Custom became one of only two wagons ever without a bottom to top back opening, the other being the 1941-42 Chrysler Town and Country (The Austin A40 Farina had a similar layout but was marketed as a sedan in that form). A more luxurious and powerful (30 PS or 22 kW, 110 km/h) Hi-Custom version was added two months later, but the entire Custom range was deleted in 1971.[21] Also in 1971 the Fronte Van received a minor facelift (called "Fresh New Fronte Van" in period marketing material), including a somewhat baroque new grille and a new, horizontally divided two-piece tailgate. The twin round taillights were also replaced by rectangular units. This version also featured Suzuki's new self-lubricating "CCIS" system (Cylinder Crank Injection and Selmix).

In March 1972 the Fronte Van received the two-cylinder, two-stroke water-cooled 28 hp L50 engine also used in the Suzuki Carry, becoming the LS20 in the process. A new grille gave away the changes underneath the skin, as did prominent "Water Cooled" badges on the rear. Aside from the engine, the most important change was that the rear lid was now once again a top-hinged single-piece unit. As before, Standard, DeLuxe, and Super DeLuxe versions were available. The Fronte Van was replaced in April 1973 by the strange-looking Fronte Hatch. Just under 28,000 of the LS20 Van were built in the thirteen months it was in production.

Sting Ray Fronte

Suzuki Fronte LC10W
Fronte 71 GT/W
Fronte 72 GL/W

In November 1970, the third generation Suzuki Fronte 71 (LC10 II) two-door sedan was introduced. Its aggressive design was commonly referred to as the "Sting Ray Look". The rear-engined chassis design and engine remained the same as its predecessor the LC10, although with a slightly longer 2,010 millimetres (79.1 in) wheelbase. Other minor chassis differences were the addition of a front anti-roll bar and the change to a semi-trailing arm rear suspension layout.[14] There were 31, 34 or 36 hp versions available, the lineup being topped by the S, SS, SSS and SSS-R (the letter "R" merely indicating the fitment of radial tires) versions.[31] As of May 1971 a water-cooled version, the LC10W, became available in either GL-W (34 hp) or 37 hp GT-W/GTR-W ("R" again meaning radial tires) versions. The success of the water-cooled models led Suzuki to quickly introduce further versions, with the lesser GO-W and GS-W models (also with 34 hp) appearing two months later.

By November 1971, after a minor facelift including a new grille, the cars were called Suzuki Fronte 72. The sporty air-cooled engines were dropped as the more refined water-cooled units became more and more popular, except in the very lowest end of the market. In March 1972, water-cooled GD-W (deLuxe) and GU-W (standard) were added.[32] In export markets, there was the Suzuki Fronte 500 with the 475 cc LC50 engine, also marketed as the Suzuki LC50 (29 PS, 115 km/h). In October 1972 the Fronte 72 was replaced by the "New Fronte" (with a new fascia and bonnet). By this time, only the Standard model ("U") retained the air-cooled engine, with an available automatic clutch. The top-of-the-line "GT-W Type II" came equipped with front disc brakes, as does its sister model the Fronte Coupé GXCF.

Fronte Coupé

Suzuki Fronte Coupé LC10W
Overview
Model years 1971-1976
Layout Rear engine, rear wheel drive
Dimensions
Wheelbase 2,010 mm (79.1 in)[34]
Length 2,995 mm (117.9 in)[34]
Width 1,295 mm (51.0 in)[34]
Height 1,195 mm (47.0 in)[34]
Curb weight 500 kg (1,102 lb)[34]
Chronology
Successor Suzuki Cervo

In September 1971 the seminal, Giugiaro-designed Fronte Coupé arrived, the predecessor to the well known Cervo range. Giugiaro's original concept was a revised version of the one-box design he had already used for the "Rowan Elettrica" city car of 1967. Suzuki then modified the design considerably, changing the proportions and adding ornamentation.[17] Based on the Stingray "LC10 II" model, the Fronte Coupé was only ever offered with the water-cooled rear-mounted LC10W engine. While initially only available as a two-seater, these were gradually replaced by four-seater versions. At first only two versions were available, the regular GE and the luxurious GX (or GER/GXR for models fitted with radial tires), both with a 37 PS (27 kW) version of the LC10W.[32] Model changes:

The Fronte Coupé was simply referred to as the Suzuki LC10W in export markets, where it received a 35 PS (26 kW) 356 cc engine. The Fronte Coupé was resurrected in a revised and larger form as the Suzuki Cervo in October 1977, after Kei car regulations were changed in January 1976.

Fronte LC20

1973 Suzuki Fronte

In July 1973 the New Fronte became the old Fronte as it was replaced by the new LC20. Its very rounded "Oval Shell" design was a radical departure from its predecessor, very much in the style of the 1970 Datsun Cherry E10. The underpinnings remained largely the same, however, retaining the water-cooled engines and suspension from the LC10 with a 20 mm longer wheelbase (2030 mm). Overall dimensions, dictated by the kei-car regulations, remained 2995×1295 mm. The air-cooled engines were discontinued, but the engine code remained LC10W - with the "W" denoting water-cooling. The radiator is mounted up front.

The bumpers were very small, no more than trim pieces. A strange and sour-looking front gave way to an ovoid rear end, culminating in an engine cover perforated by at least 50 vent openings. On the rear fenders two louvered vents allow air to the engine compartment; the right-hand one also opens to allow access to the fuel filler. Finally, a frameless opening rear glass provides a measure of hatchback practicality.[14]

A big first for Suzuki was the availability of a four-door version, lagging behind competing offerings from Daihatsu, Subaru, and Honda. Between the two engines, two bodystyles and several different equipment levels, a confusingly large lineup was on offer: two-door GU, GD, GH, GC, GT, GT type II, and four-door FU, FD, FH, FC, FT. In July 1974 the 37 hp GT engine was downgraded to 35 PS, while the 34 PS version was replaced by a 32 PS unit. The lowest powered 32 and 34 PS models had single Solex carburetors rather than the triple units used on more powerful models.[35] Later on, the range was rationalized and the models renamed Standard, Deluxe, and Custom. The LC20 was taken out of production in May 1976, although the doors and basic layout would continue in use for the succeeding SS10 (Fronte 7-S) series. The LC20 also entered CKD production in Indonesia, with Suzuki's local partner PT Indohero, in 1976. It, along with the ST10 Carry, was the first four-wheeled Suzuki built there.[36] It was only built there for about a year, soon being replaced by the new SS20.

Fronte Hatch

Fronte Hatch LS30

In April 1973 the LS30 "Fronte Hatch" replaced the LS20 Suzuki Fronte Van. It used the 28 hp two-cylinder two-cycle water-cooled 359 cc L50 engine also seen in the Carry and Jimny and was of a front-engine, rear-wheel drive layout. The Hatch was available in four equipment levels, ranging from the very basic "E" which lacked even a heater, via "B" and "D" to the range topping "T" version. Being more comfortable than the LS20 Van it replaced, the Hatch had headrests in both front seats and got the same dashboard as the "Sting Ray" Fronte (albeit only with two gauges).[37] While called the "LS30", the Hatch's chassis code remained LS20 as for its predecessor. To set it apart, chassis numbers skipped ahead to LS20-200001.

By December 1974 the car lost the "Fronte" badging, but retained the Fronte name in marketing material. Also in 1974 (May), the emissions became cleaner to match the 50年 (1975) emissions rules, but power was down to 26 PS. The basic "E" version was dropped. The first cosmetic change the 360 series Hatch underwent was a modification of the trunklid to accept the larger license plates (330 × 165 mm) legislated for January 1, 1975. In export markets, the vehicle was also available with rear side window panels. for the 1976 model year another horsepower was lost, as emissions rules were gradually tightened, and the Hatch received a new grille, the taillights were held in place by two rather than three screws, and the C-pillar logo was altered. A more luxurious "Custom" model was also brought out for 1976. This had more comfortable (softer) suspension, lowering cargo capacity from 300 to 200 kg (660 to 440 lb).[37] Production ended in May 1976.

Reflecting new Kei car rules, in July 1976 the length of the Hatch was extended to 3190 mm (wheelbase to 2100 mm), all ahead of the firewall. The new front and new large bumpers made what was an already odd-looking car even stranger. Now the Suzuki Fronte Hatch 55 (or 550), it received the three-cylinder 539 cc LJ50 engine, which was a de-smogged L50 engine with an extra cylinder tacked on: it was also known as the T5A/T5B in other applications. The new model code was SH10. The inside remained nearly unchanged and the only differences at the rear was a new, larger bumper, and the change to a single strut for the rear gate for increased access. Power remained 25 PS as per late 360 Hatches, but torque was up considerably. The lineup was again restricted to B, D, and T models, with the T receiving chromed rather than painted bumpers.

For 1979 the models were renamed Standard, Deluxe, and Super Deluxe.[39] The Hatch was succeeded in May 1979 by the SS30 Alto.

Fronte 550

Fronte 7-S

Fronte 7-S

Fronte 7-S, SS10 Super Deluxe
Overview
Also called Suzuki SS10, SS20
Production 05.1976–04.1979
Assembly Kosai Assembly Plant, Hamana-gun, Shizuoka, Japan
Body and chassis
Body style 2/4-door hatchback
Layout RR layout
Related Suzuki Cervo
Powertrain
Engine
Transmission 4-speed manual
Dimensions
Length 3,190 mm (125.6 in)
Width 1,395 mm (54.9 in)
Height 1,300 mm (51.2 in)
Curb weight 520–555 kg (1,146–1,224 lb)
Fronte 7-S SS10 (rear view)

Government plans had been made to gradually increase the Kei car engine size limit to 550 cc, to make room for cleaner four-stroke engines and to reverse the slowing Kei car sales curve. Many manufacturers responded with interim, 500 cc models in 1976, Suzuki among them. In June 1976 the Fronte 7-S was presented, model code SS10. As per the new regulations, it was 100 mm (3.9 in) wider than the LC20 series and had a larger engine of 443 cc. Wheelbase remained at 2,030 mm (79.9 in), while overall length grew to 3,190 mm (125.6 in) thanks to new bigger bumpers and a somewhat bulkier rear end. The more squared-off front end also allowed for a larger front luggage area.[40]

The T4A engine was still a three-cylinder two-stroke (simply a bored out version of the LC10), as Suzuki considered themselves experts at this configuration. The new Suzuki TC ("Two Catalyst") emissions system meant that it could meet the new 1975 (50年) emissions standards.[41] The downside was that the new engine produced a mere 26 PS (19 kW) at 4500 rpm rather than the 32 PS (24 kW) of the 360 cc engine it replaced. The layout remained RR, with a four-speed manual transmission.[42] "7-S" was meant to stand for Space, Safety, Sense, Save money, Silent, Stamina, and Suzuki TC, not necessarily always in the same order. In January 1977, the Fronte received some light alterations including new seats, a rectangular Suzuki badge in the front grille, taillights of a new construction, and a slightly remodelled engine lid with a somewhat wider recess for the license plate. This model is sometimes referred to as the SS10-2, to tell it apart from the pre-facelift model.[43]

Fronte 7-S (A-SS10)
2-door Standard, DeLuxe, Super DeLuxe
4-door Standard*, DeLuxe, Super DeLuxe, Custom
The 4-dr Standard was removed from pricelists by January 1977.

Suzuki's inability to fully meet the 1978 emissions regulations with the two-stroke engine compelled them to write a contract with Toyota to purchase engines from their subsidiary Daihatsu, Suzuki's main competitor. Beginning in May 1977 Daihatsu's catalysed 28 PS (21 kW) four-stroke AB10 engine was installed in the SS11, selling in parallel[44] with the two-stroke at a slightly higher (by ¥18,000) price.[45] Four-strokes had a "4" logo in the grille. These were very weak sellers, offering much less torque and drivability than their two-cycle brethren.[46] Torque was 3.9 kgm at 3500 rpm, versus 4.6 kgm in the smaller two-stroke engine. At about the same time, in an attempt at meeting the tighter 1978 (53年) emissions standards with a two-stroke, the new SS12 Fronte 7-S was presented. It had a now even cleaner T4A engine called the TC53.[45] "TC53" stood for Twin Catalyst, year 53 of the Showa era (1978 in the common era). This new, cleaner engine lost further power and torque though, now down to 25 PS (18 kW), and still barely met the official emissions standards. A mere 6421 SS12s were built, compared to 66,540 SS10 Frontes.[47]

Export version "Suzuki SS10 Custom" two-door (Chile)

The interim SS12 was replaced by the "full scale" 550 cc SS20 version presented on 27 October 1977, with a slight facelift consisting of a new grille, redesigned cladding around the C-pillars, and a new dashboard.[48] The SS20 is equipped with the T5A engine (first seen in the Jimny), with 539 cc it offered 28 PS (21 kW) at 5000 rpm and 5.3 kgm at 3000 rpm, which helped bring top speed up from 105 to 110 km/h (65 to 68 mph).[49] To use up leftover four-stroke engines, the SS11 received the same facelift, becoming the SS11-2. The SS11-2 was fairly short-lived, though, as the T5A engine met emissions regulations on its own and Suzuki was now able to terminate their contract with Toyota.[50] The torque gap between the four- and the two-stroke models was widened further: while the SS11 could climb a slope of 0.34 tanα (18.8˚) the SS20 could manage 0.52 tanα (27.5˚). The production run of the SS20 was not very long either, coming to an end after just over a year and a half.[44]

The Fronte 7-S was never a big seller, as it was an old design and two-stroke engines were beginning to lose favor with Japanese car buyers. The SS10 and SS20 Frontes were both clearly based on the old LC20, making do with a widened LC20 chassis and using its doors and many interior parts. For the SS20 Suzuki resorted to increasingly awkward efforts to hide the LC20's curvy design with square blocks of plastic, without much success.[51] Production ended in April 1979, as Suzuki was getting ready to introduce their new generation of front-wheel drive kei cars. In the few export markets where it was available, the Fronte 7‑S was simply sold as the "Suzuki SS10" and "SS20", foregoing the Fronte name. It was also built with left-hand-drive. The SS10 received an engine less burdened by emissions equipment than the Japanese market model, producing 28 PS (21 kW) at 4500 rpm. It was available as the two-door FC (Custom) and the four-door GL (Deluxe).[52]

SS30/SS40

Fronte (SS30/40)

Suzuki Fronte SS40S
Overview
Also called
Production 1979–1984
Assembly Kosai Assembly Plant, Hamana-gun, Shizuoka, Japan
Karachi, Pakistan
Nairobi, Kenya
Body and chassis
Body style 3/5-door hatchback
Related Suzuki Cervo
Powertrain
Engine 539 cc T5B two-stroke I3 (SS30)
543 cc F5A SOHC I3 (SS40)
796 cc F8B SOHC I3 (SS80)
Dimensions
Wheelbase 2,150 mm (85 in)
Length 3,195 mm (125.8 in)
Width 1,395 mm (54.9 in)
Height 1,335 mm (52.6 in)
Curb weight 570 kg (1,260 lb)

In May 1979 the Fronte 7-S was replaced by the new SS30/SS40 Fronte.[53] The Fronte Hatch 55 was also discontinued, from now on the commercial versions all used the Alto name. Alto also came to be the name used in export markets. SS30S was the two-stroke engined version of the Fronte (539 cc, three cylinders, 28 PS (21 kW) T5B) while the SS40S received a newly developed, 543 cc four-stroke three-cylinder engine, the F5A. This developed 31 PS (23 kW) and proved very popular, soon displacing the two-stroke entirely. The T5B would no longer be available in the Fronte after May 1981. The Alto light commercials received the SS30V/SS40V designation, and considerably lower gearing since it was mainly intended for short distance inner-city use. Both the Alto and Fronte had a claimed top speed of 110 km/h (68 mph).

Rear view, showing the opening rear window (Alto SS80F, Europe)

The new Fronte was a big step away from the SS20, making the switch from a rear-engined, rear-wheel drive configuration to a more up-to-date transversely mounted engine in front, driving the front wheels. Wheelbase was increased from 2030 to 2150 mm and the new car was much more spacious. The four-door Fronte had an opening rear glass window, whereas the two-door Alto got a proper rear hatch. In some export markets the car was just known as the Suzuki SS40. In Europe, the Fronte (labelled Alto) was also sold with a 796 cc four-stroke three (SS80) from July 1981 and was 100 mm longer, thanks to bigger bumpers. These cars also received larger 12-inch wheels. Four-doors received the SS80F chassis code, while three-door passenger versions were called SS80G.

In October 1982 the Fronte/Alto received a minor facelift, and now featured square headlamps. In May 1983, the Fronte's engine was mildly updated, while on the outside there was a new grille and door mirrors rather than fender-mounted ones. The valve timing was adjusted and transistor ignition was introduced, the compression ratio nudged up to 9.7:1 (from 9.5), and the EGR and catalytic converter were improved.[54] Claimed power inched down to 29 PS (21 kW) at 6000 rpm.[55] A new top version, the FS-QG was also introduced. It offered digital instrumentation.[54] The Alto generally outsold the Fronte at a rate of about five to two, although the Fronte remained the best selling kei passenger car into 1984.[56]

From 1984 until replaced in 1986, the four-door SS80 Fronte was built in India by Maruti as the "800".

Cooper Motor Corporation (CMC) of Nairobi, Kenya, also assembled the four-door SS80 in the eighties.[57]

Pricelist
Two-stroke (SS30) Four-stroke (SS40)
FX ¥568,000 FS ¥568,000
FX-L ¥638,000 FS-L ¥638,000
FX-C ¥678,000 FS-C ¥678,000
FX-G ¥718,000 FS-G ¥718,000
The Alto was priced at a very low ¥470,000

FX 800

In Pakistan the four-door version was available with the F8B engine (800 cc, 40 hp), and was sold as the Suzuki FX 800. The FX was sold from 1983 to 1988 when it was replaced by the SB-308 body style (also known as the CB72, still in production), called the Suzuki Mehran. The FX features prominently as the car driven by the protagonist in Mohsin Hamid's debut work Moth Smoke.

CB71

Fronte (CB71)

Early Fronte 5d CB71S
Overview
Also called Suzuki FX
Maruti 800
Production 1984-1988
1988-2013 (China)
Assembly Hamana-gun, Shizuoka, Japan
Karachi, Pakistan
Nairobi, Kenya
Chongqing, China
Jilin, China
Zhangjiagang, Jiangsu
Xi'an, Shaanxi Province
Body and chassis
Body style 3/5-door hatchback
Powertrain
Engine 543 cc F5A SOHC I3 (SS40)
796 cc F8B SOHC I3 (SS80)
Dimensions
Wheelbase 2,175 mm (85.6 in)
Length 3,195 mm (125.8 in)
Width 1,395 mm (54.9 in)
Height 1,410 mm (56 in)
Curb weight 590 kg (1,300 lb)

In September 1984 the new Fronte CB71 was introduced. Now only with the F5A four-stroke engine, it retained the suspension of the SS40 model (leaf sprung, beam axle). The Fronte was now a full five-door hatchback, on a wheelbase extended to 2,175 mm (85.6 in). Only the 543 cc F5A engine was available, with the power output back up to 31 hp (23 kW) at 6000 rpm. The most expensive model, the FG, received front disc brakes (the lesser versions making do with drums all around) and a 5-speed manual transmission or 2-speed automatic. As before, the Fronte received higher gearing than the Alto, reflecting its intended usage. Top speed was 120 km/h (75 mph), 2 more km/h than the Alto.

Facelifted Fronte 5d CB72S

In July 1986 the CB71 became the CB72 after a rather thorough facelift. The headlights were new, of the wraparound sort and the interior was changed with a new dashboard, but the main changes were under the skin: the old rear suspension was replaced with Suzuki's patented ITL suspension (Isolated Trailing Link).[58] This three-link rigid setup considerably improved the ride. By February 1987, the Fronte became available as a three-door, with the FS Twin Cam 12 version with a 40 PS (29 kW) at 7500 rpm, DOHC 12-valve F5A engine (FR in the five-door version). The engine had two horsepower more in the Alto; this is due to less stringent emissions standards for commercial vehicles. In August 1987 a three-speed automatic transmission became available, and lastly there was also a pert-time four-wheel drive version of the five-door CB72 Fronte (the CD72S, from January 1988). By September, the CB/CD72 was replaced. The 1988 Suzuki Cervo used the chassis, front clip and door panels from the CB/CD72 Fronte.

A slightly longer and wider version (bigger bumpered), equipped with the same 796 cc engine as the SS80, producing 40 hp (30 kW) was the export model. In Europe it was sold as the Alto, in other countries as the SB308 or with the Fronte nameplate. The facelifted Fronte has also been produced (or still is being built) under license by many other manufacturers:

CN11S

Fronte (CN11S)
Overview
Production Oct 1988-March 1989
Assembly Hamana-gun, Shizuoka, Japan
Body and chassis
Body style 5-door hatchback
Related Daewoo Tico
Powertrain
Engine 547 cc F5B
Dimensions
Wheelbase 2,335 mm (91.9 in)
Length 3,195 mm (125.8 in)
Width 1,395 mm (54.9 in)
Height 1,385 mm (54.5 in)
Curb weight 590 kg (1,300 lb)

In September 1988, the new CN11S Fronte debuted. The previous generation was not as roomy as the competition due to its comparably short wheelbase, but the new version addressed this issue by having it stretched out by 160 mm (6.3 in) to 2,335 mm (91.9 in). A sleeker looking body, with rear side windows that wrapped around the edge of the roof, also helped sales. Apart from the very cheapest variants, the Fronte got front disc brakes and 12 inch radial tyres. The Fronte also received the 547 cc 12-valve SOHC F5B engine from the Suzuki Cervo, developing 40 hp (30 kW) at a lively 7500 rpm. There was no three-door version this time, but a 4WD variant (CP11) was available.

CN/CP11S Pricelist (09.89)
Model Manual Automatic
FP ¥669,000 ¥729,000
Wit ¥749,000 ¥809,000
We've ¥839,000 ¥899,000
FL ¥895,000 (5MT) ¥935,000
FI 4WD ¥875,000 -

And then, only six months later, Suzuki's longest running nameplate was laid to rest. When Japanese tax laws for vehicles in the kei class were changed in April 1989, kei commercial vehicles were no longer quite as favored as before. But, since the Alto had long had a much larger market share than the Fronte, it was decided to drop the Fronte name and focus marketing efforts on the Alto, which now became available as a five-door and three-door sedan as well as a three-door van. With the 796 cc engine, the CN11S Fronte was built in China as the Anchi 6330. The CN11 was never exported to Europe, as they received the Cervo Mode (labelled as an Alto) instead. However, South Korea's Daewoo built the car under license as the Tico, and this model saw a great deal of sales particularly in Eastern Europe.

References

  1. 1 2 Ruiz, Marco (1986). 'The Complete History of the Japanese Car: 1907 to the Present. Rome: ERVIN srl. p. 166. ISBN 0-517-61777-3.
  2. ↑ Mizukawa, Yuki (2012). 二輪自動車産業における寡占体制形成 [Oligopolistic structure formation in the motorcycle industry]. Economic Bulletin of Senshu University (in Japanese). Tokyo, Japan. 47 (1): 76.
  3. ↑ 360cc: Nippon 軽自動車 Memorial 1950→1975 [Nippon Kei Car Memorial 1950-1975] (in Japanese). Tokyo: Yaesu Publishing. 2007. p. 59. ISBN 978-4-86144-083-0.
  4. ↑ 大会詳細結果 [Detailed race results] (in Japanese). Japan Automobile Federation. Retrieved 2013-09-27.
  5. ↑ Ozeki, p. 25
  6. ↑ モノづくりの現場から　-第29回- [From the manufacturing field, no. 29]. JAMAGAZINE (in Japanese). Japan Automobile Manufacturer's Association (JAMA). May 2006. Archived from the original on 2013-10-02.
  7. ↑ "1963年 スズライト フロンテ FEA" [1963 Suzulight Fronte FEA] (in Japanese). Retrieved 2013-09-27.
  8. 1 2 競技結果: 第１回日本グランプリ自動車レース大会 [Competition Results: 1st Japan Grand Prix motor racing tournament] (in Japanese). Japan Automobile Federation. Retrieved 2013-09-27.
  9. ↑ Ozeki, p. 24
  10. 1 2 3 Car Graphic: Car Archives Vol. 5, '70s Japanese Cars (in Japanese). Tokyo: Nigensha. 2007. p. 140. ISBN 978-4-544-09175-5.
  11. ↑ Ozeki, p. 28
  12. 1 2 3 4 Meyer, Allan G. Y. (1996). "Suzuki Fronte, Queen For a Day". AutoPhyle. Watsonville, CA. 5 (Spring, #2): 6.
  13. 1 2 3 4 5 Schoenmaker, Johan (2015-02-26). "Suzuki Fronte Geschiedenis" [The history of the Suzuki Fronte] (in Dutch). Suzuki klassiekers. Archived from the original on 2016-08-15.
  14. 1 2 3 Meyer, p. 8
  15. ↑ Ozeki, p. 32
  16. ↑ Yamaguchi, Jack (February 1968). "14th Tokyo Motor Show: & Still Trying Harder". Road & Track. p. 114.
  17. 1 2 Meyer, p. 7
  18. ↑ Nippon 軽自動車 Memorial, p. 70
  19. ↑ Ozeki, p. 31
  20. 1 2 Nippon 軽自動車 Memorial, p. 73
  21. 1 2 Nippon 軽自動車 Memorial, p. 75
  22. 1 2 3 360cc 軽商用貨物自動車 1950-1975 [360cc: Light Commercial Truck 1950-1975] (in Japanese). Tokyo: Yaesu Publishing. 2009. pp. 44–45. ISBN 978-4-86144-139-4.
  23. 1 2 "New Fronte (フロンテ) 360". 月刊自動車 [The Motor Monthly] (in Japanese). 11 (8): 21. August 1969. 3439.
  24. ↑ Suzuki Fronte Van (catalog), Suzuki Motor Corporation, 1972
  25. ↑ Suzuki Fronte (catalog), Suzuki Motor Corporation, fall 1969
  26. 1 2 Suzuki Fronte 71 (catalog), Suzuki Motor Corporation, 1970
  27. ↑ Suzuki Business Car (Catalog), Suzuki, 1971
  28. ↑ Suzuki Digital Museum Online, Frontier Period 1966-1977 (フロンティア期 1966-1977). Accessed on 2010-10-08
  29. ↑ World Cars 1972. Bronxville, NY: L'Editrice dell'Automobile LEA/Herald Books. 1972. p. 382. ISBN 0-910714-04-5.
  30. ↑ Suzuki Story, p.37
  31. ↑ Ozeki, pp. 40-41
  32. 1 2 3 Nippon 軽自動車 Memorial, pp. 82-84
  33. ↑ Suzuki New Fronte (catalog), Suzuki Motor Corporation, 1972
  34. 1 2 3 4 5 Wan, Mark. "Suzuki Fronte Coupe – Cervo". AutoZine.org. Archived from the original on 3 April 2017. Retrieved 3 April 2017.
  35. ↑ "アカイ自動車へLC20のお見舞い" [LC20 is shown sympathy by Akai Automobiles]. スズキフロンテ３６０cc伸間 (in Japanese). 2006-07-11.
  36. ↑ "Suzuki Fronte LC20 SS20". Mobil Motor Lama (in Indonesian). August 2016. Archived from the original on 2017-07-29.
  37. 1 2 MX41. "フロンテハッチ ページ2（360cc）" [Fronte Hatch page 2 (360cc)]. ボール紙の車庫（仮）[Cardboard Box Garage] (in Japanese). Retrieved 2013-09-26.
  38. ↑ Costa, André & Georges-Michel Fraichard, ed. (September 1979), Salon 1979: Toutes les Voitures du Monde (in French) (14 & 15), Paris: l'Auto Journal, p. 183
  39. ↑ 自動車ガイドブック [1978/1979 Japanese Motor Vehicles Guide Book] (in Japanese), 25, Japan: Japan Automobile Manufacturers Association, 1978-10-10, p. 203, 0053-780025-3400
  40. ↑ Meyer, p. 9
  41. ↑ 自動車ガイドブック [1976/1977 Automobile Guide Book] (in Japanese), 23, Japan: Japan Automobile Manufacturers Association, 1976-10-20, p. 86, 0053-760023-3400
  42. ↑ Suzuki Fronte 7-S (brochure), Suzuki Motor Corporation, June 1976 (51F).
  43. ↑ Suzuki パーツカタログ: スズキ SS10 [Suzuki Parts Catalogue: Suzuki SS10] (in Japanese), Suzuki Motor Corporation, November 1978, pp. 34, 52, 67, 77, 99000-42522
  44. 1 2 Suzuki Story, pp. 66–67.
  45. 1 2 "New Car Pricing". Car Graphic (in Japanese). Tokyo: Nigensha. 16 (201): 287. December 1977.
  46. ↑ Aoi Omote Move. "Fronte 7-S four-stroke". Treasure Hunter. Archived from the original on 2010-08-10.
  47. ↑ Suzuki Parts Catalogue: Suzuki SS10, p. 1
  48. ↑ Automobile Guide Book 1978/1979, p. 109
  49. ↑ Freund, Klaus, ed. (1978). Auto Katalog 1979. 22. Stuttgart: Vereinigte Motor-Verlage GmbH & Co. KG. pp. 204–205.
  50. ↑ Yamaguchi, Jack K. (1979), Lösch, Annamaria, ed., "Japan: The Year of Uncertainty?", World Cars 1979, Pelham, NY: L'Editrice dell'Automobile LEA/Herald Books: 66, ISBN 0-910714-11-8
  51. ↑ Car Graphic: Car Archives Vol. 11, '80s Japanese Cars. Tokyo: Nigensha. 2007. p. 142. ISBN 978-4-544-91018-6.
  52. ↑ Suzuki SS10: Owner's Manual, Suzuki Motor Corporation, December 1976, pp. 4, 5, 46, 99011-70601
  53. ↑ 自動車ガイドブック [1979/1980 Japanese Motor Vehicles Guide Book] (in Japanese), 26, Japan: Japan Automobile Manufacturers Association, 1979-11-01, p. 115, 053-790026-3400
  54. 1 2 自動車ガイドブック [Japanese Motor Vehicles Guide Book 1983/1984] (in Japanese), 30, Japan: Japan Automobile Manufacturers Association, 1983-10-28, p. 159, 0053-830030-3400
  55. ↑ Automobile Guide Book 1983/1984, p. 237
  56. ↑ Hattori, Yoshi (June 1984). "Japan: Minica magic". Wheels. Sydney, Australia: Murray Publishers: 19. Monthly sales in February 1984 were 5500 for the Fronte and 14000 for the Alto
  57. ↑ Mastrostefano, Raffaele, ed. (1985). Quattroruote: Tutte le Auto del Mondo 1985 (in Italian). Milano: Editoriale Domus S.p.A. p. 225. ISBN 88-7212-012-8.
  58. ↑ 自動車ガイドブック [Japanese Motor Vehicles Guide Book 1986–'87] (in Japanese), 33, Japan: Japan Automobile Manufacturers Association, 1986-10-20, p. 119, 0053-870034-3400
Suzuki/Suzulight road car timeline, 1955–1989 — next »
Type 1950s 1960s 1970s 1980s
56789 0123456789 0123456789 0123456789
Kei sedan Suzulight SS Suzulight Fronte Fronte 360 "Stingray" Fronte Fronte LC20 Fronte 7-S Fronte Fronte Fronte
Kei Sports Fronte Coupé Cervo/SC100 Cervo Cervo
Kei light commercial Suzulight SL/SD/SP Suzulight 360 Van Fronte Van/ Estate/Custom Fronte Hatch Alto Alto Alto
Kei truck Mighty Boy
Suzulight Carry FB (Suzulight) Carry L20, L30 Carry L40 Carry L50/L60 Carry 55/Wide Carry ST30/40 Carry
Kei van Suzulight Carry Van FBD (Suzulight) Carry Van L20, L30 Carry Van L40 Carry Van L50/L60 Carry Van 55/Wide Carry Van/Every Every
Microvan ST80 ST90 SuperCarry
Subcompact Fronte 800 SA310/Cultus Cultus
Kei SUV Jimny, Jimny55 Jimny550
Mini SUV Jimny8, LJ80 Jimny1000, SJ410 Jimny1300, SJ413, Samurai
Escudo
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.