Sustainable products

Sustainable products are those products that provide environmental, social and economic benefits while protecting public health and environment over their whole life cycle, from the extraction of raw materials until the final disposal.

Scope of definition

According to Belz, Frank-Martin.,^[1] the definition of sustainable product has six characteristics:

• Customer satisfaction: any products or services that do not meet customer needs will not survive in the market in a long term.
• Dual focus: compared with purely environmental products, sustainable products focus both on ecological and social significance.
• Life-cycle orientation: sustainable product is constantly environmental-friendly during its entire life. That is, from the moment the raw materials are extracted to the moment the final product is disposed of, there must be no permanent damage to the environment.
• Significant improvements: sustainable products have to contribute to dealing with socio-ecological problems on a global level, or provide measurable improvements in socio-ecological product performance.
• Continuous improvement: since the state of knowledge, technologies and societal expectation keep on developing, so sustainable products should also be continuously improved regarding social and environmental variation.
• Competing offers: sustainable products may still lag behind competing offers, therefore, the competing offers may serve as a benchmark regarding social and ecological performance.

Michael Braungart and William McDonough's book Cradle to Cradle: Remaking the Way We Make Things ^[2] expands on the life-cycle part of this definition. They suggest that we should make every material and product so that it can be disassembled when its use is over, and so that all the materials of which it is made can then be returned to the Earth after composting, or endlessly recycled as raw materials.

Overall standards

Nordic Swan Ecolabel The standard of Nordic Swan Ecolabel, which is distributed in Norway, Sweden, Denmark, Finland and Iceland, mainly refers to distinguish products that have a positive effect on the environment. Or rather, it has climate requirements that limit the amount of CO2 emissions where it is most relevant.^[3] More than 3,000 products, mainly household chemicals, paper products, office machinery and building materials have been issued with this label. The criteria account environmental factors through the product's life cycle (raw material extraction, production and distribution, use and refuse). Thus the most important parameters are consumption of natural resources and energy, emissions into air, water and soil, generation of waste and noise.

Global Reporting Initiative (GRI)

GRI frames out and disseminates global sustainability reporting guidelines for ‘voluntary use by organizations reporting on the economic, environmental, and social dimensions of their activities, products and services’.^[4] According to GRI Guidelines, reporters should take into consideration stakeholders’ interests and use the social indicators and others that more accurately depict the social and ecological performance of the organization.

Life Cycle Assessment (LCA)

LCA evaluates and discloses the environmental benefits of products over their full life cycle, from raw materials extraction to final disposition. Since 1997 the process of conducting LCA studies has been standardized by the International Organization for Standardization (ISO).

Product-oriented standards

Organic Food Labeling

The National Organic Program (run by the USDA) is responsible for the legal definition of organic in the United States and issue organic certification.

Organic food are foods that are produced using methods involving no agricultural synthetic inputs, for instance, synthetic pesticides, chemical fertilizers, genetically modified organisms (GMO), and are not processed using irradiation, industrial solvents, or chemical food additives.^[5] Currently, the United States, European Union, Canada, Japan and many other industrialized countries require food producers to acquire special critieria or certification to market their products as "organic". Apparently, organic food producers emphasize sustainable conservation of the social-ecological attributes such as soil, water and the whole ecosystem. International organizations such as the Organic Consumers Association supervise the development of organic food. According to the National Organic Program (NOP) in the US, a voluntary green-and-white seal on foods’ packaging denotes that a product is at least 95% organic.^[6]

MSC Labeling

The Marine Stewardship Council (MSC) is an independent non-profit organization which was established in 1997 in order to cope with the overfishing problem. Fisheries that are assessed and meet the standard can use the MSC blue ecolabel. The MSC mission is to 'reward sustainable fishing practices’. As of the end of 2010, more than 1,300 fisheries and companies had achieved a Marine Stewardship Council certification.^[7]

FSC Labeling

The Forest Stewardship Council (FSC) is an international non-profit organization established in 1993 to ‘promote forest management that is environmentally appropriate, socially beneficial and economically viable’.^[8] Its main responsibilities for achieving the goal are standard framing, independent certification issuing and labeling. FSC directly or indirectly addresses issues such as illegal logging, deforestation and global warming and has positive effects on economic development, environmental conservation, poverty alleviation and social and political empowerment.^[9][10]

Fair Trade Labeling

EKOenergy is an ecolabel for energy in Europe

Although there is no universally accepted definition of fair trade, Fair trade Labeling Organizations International (FLO) most commonly refer to a definition developed by FINE, an informal association of four international fair trade networks (Fair trade Labeling Organizations International, World Fair Trade Organization - formerly International Fair Trade Association, Network of European Worldshops and European Fair Trade Association): fair trade is a trading partnership, based on dialogue, transparency and respect, that seeks greater equity in international trade. It contributes to sustainable development by offering better trading conditions to, and securing the rights of, marginalized producers and workers – especially in the South. Fair trade organizations, backed by consumers, are engaged actively in supporting producers, awareness raising and in campaigning for changes in the rules and practice of conventional international trade.^[11]

U. S. Green Building Council LEED Rating System

The LEED Green Building Rating System evaluates environmental performance of all buildings over their life, providing the definitive standard for what constitutes a "green" building, persuading the consumer and building industry to develop products that are more environmentally and economically viable.^[12]

EKOenergy label

EKOenergy is an ecolabel originating in Finland. It is becoming the continent wide ecolabel for energy, which is supported by number European NGOs. It evaluates sustainability of electricity products on open energy markets.^[13]

Green Seal

Green Seal is a North American non-profit ecolabel organization established in 1989. It generates life cycle-based sustainability standards for products, services and companies in addition to offering third party independent test organization certification for those meeting its standards. Green Seal was the first non-profit environmental certification program established in the United States. It currently has certified nearly 4,000 products and services within 400 categories.^[14]

Sustainable product polices

International

Since 1998, the branch of the United Nations Environment Programme (UNEP) has undertaken several national programs or action plans on sustainable consumption and production.^[15] Moreover, the United Nations is responsible for administrating the Marrakech Process^[16] and developing the ten-year Sustainable Consumption and Production Framework through Regional Marrakech Process Consultations, whose goal is to accelerate the shift towards sustainable consumption and production (SCP). Organization for Economic Cooperation and Development (OECD)’s Environmental Directorate has also done comprehensive work on the environmental impacts of sustainable consumption and production. One of current OECD projects is reviewing measures for sustainable manufacturing production.^[17]

Regions and countries

European Union: on 16 July 2008 the European Commission presented the Sustainable Consumption and Production and Sustainable Industrial Policy (SCP/SIP) Action Plan^[18] which clarifies the United Nations’ Marrakech Process on Sustainable Consumption and Production and global ten-year Sustainable Consumption and Production Framework and it is finally adopted by the Council on 4 December 2008 and is updated regularly. It includes a series of proposals on sustainable consumption and production to target EU goals for environmental sustainability, economic growth and public welfare, which are as follows:

• A proposal to extend mandatory labeling requirements which is relevant to the energy efficiency of products according to the 1992 Energy Labeling Directive.
• A proposal to widen the covering fields of voluntary EU Ecolabel of products (e.g., including food and beverage products) and streamline the system.^[19]

Sample EU energy efficiency label

• A proposal for an independent communication on green public procurement. This communication identifies economic priority sectors, establishes common environmental criteria and guides to implement green public procurement by Member States.^[20]
• A proposal for the revision of the EU Eco-Management and Audit Scheme (EMAS) to enlarge the number of companies involved, including companies outside the EU, and decrease the administrative costs for Small and Mediums Sized Enterprises (SMEs).^[21]
• Proposals on sustainable consumption and production that will contribute to improve the environmental efficiency of products and increase the demand for more pro-environmental goods and production technologies.

The United States government does not have a standardized national policy or strategy for sustainable consumption and production. However, the U.S. Environmental Protection Agency (EPA) develops extensive sustainability programs on water, agriculture, energy, and ecosystem, etc. At the same time, the U.S. Department of State’s Sustainable Development Partnerships web page provides considerable information about the U.S. government's sustainable development initiatives to help other countries set up and implement their own development strategies in social and ecological terms.^[22]

United Kingdom government considers Sustainable Consumption and Production is one of the four priority sectors identified in the 2005 UK Sustainable Development Strategy. The UK government is carrying out a series of actions.^[23] to achieve goals of sustainable consumption and production in public and private areas respectively.

Norwegian Ministry of the Environment founded Norway’s Green in Practice (GRIP), which is a public-private foundation established in 1996 to promote sustainable consumption and production. At the same time, Norway’s Ministry of Finance has primary responsibility to fund the strategy of sustainable development.^[24]

Australian government requires that certain electrical products for sale should contain mandatory energy-efficiency labeling to provide consumers with information that helps reduce energy use and green house gas emissions.^[25]

Sustainable product design

Conventionally, environmental management systems have always addressed the impacts of products on local surroundings. ISO 14001 (ISO 14001:3) provides a formalized framework for managing significant environmental aspects and improving environmental performance through a ‘‘Plan, Do, Check, Review’’ continual improvement cycle.^[26] During the phase of product planning, consumer demands and market opportunities are evaluated. At this time a product description and execution plans for a successful program launch are developed and product requirements are defined. During the phase of product development, specific design specifications are finalized, models are built, and designs are reviewed and released for manufacture planning. Once manufacturing begins, the product is commercially launched for general availability and volume deployed to the marketplace. Once a prototype is available, LCA is used as a fundamental standard to identify significant social and environmental aspects and quantify environmental impact. Once a product is launched into market and becomes commercialized, it enters the maturity phase, which means that the sales and the profits both reach the peak. The maturity phase contains two stages: during the first stage of maturity, the customer is utilizing the product. Modifications may still be made to the product to enhance or change it. The product enters the second stage of maturity when it approaches near to the decline phase. Where applicable, end-of-life products are taken back and subsequently reused or recycled efficiently. While being a legal requirement in the EU, the take back of end-of-life products offers the chance to review the final life cycle stage of a product through direct contact with recyclers. This knowledge can then be applied to future designs and product improvement.

See also

• Cradle to Cradle Design
• Downcycling
• Upcycling
• Life cycle assessment
• Environmentally friendly

References