Stumped

Indian wicketkeeper M. S. Dhoni appeals for a stumping against Australian batsman Matthew Hayden.

Stumped is a method of dismissal in cricket.^[1]

It is one of the ten ways in which a batsman can be out. The action of stumping can only be performed by a wicket-keeper and, according to the Laws of cricket, a batsman can be out stumped if:

• the wicket-keeper puts down the wicket, while the batsman is:
  • out of his ground (because he has moved down the pitch beyond the popping crease, usually in an attempt to hit the ball); and
  • not attempting a run.

Being "out of his ground" is defined as not having any part of the batsman's body or his bat touching the ground behind the crease – i.e., if his bat is slightly elevated from the floor despite being behind the crease, or if his foot is on the crease line itself but not completely across it and touching the ground behind it, then he would be considered out (if stumped). One of the fielding team (such as the wicket-keeper himself) must appeal for the wicket by asking the umpire. The appeal is normally directed to the square-leg umpire, who would be in the best position to adjudicate on the appeal.

Stumping

Stumping is the fifth most common form of dismissal after caught, bowled, leg before wicket and run out,^[2] though it is seen more commonly in Twenty20 cricket because of its more-aggressive batting. It is governed by Law 39 of the Laws of cricket.^[1] It is usually seen with a medium or slow bowler (in particular, a spin bowler), as with fast bowlers a wicket-keeper takes the ball too far back from the wicket to attempt a stumping. It requires co-operation between a bowler and wicket-keeper: the bowler must draw the batsman out of his ground (such as by delivering a ball with a shorter length to make the batsman step forward to hit it on the bounce), and the wicket-keeper must catch and break the wicket before the batsman realises he has missed the ball and makes his ground, i.e. places the bat or part of his body on the ground back behind the popping crease. If the bails are removed before the wicket-keeper has the ball, the batsman can still be stumped if the wicket-keeper removes one of the stumps from the ground, while holding the ball in his hand. The bowler is credited for the batsman's wicket, and the wicket-keeper is credited for the dismissal. A batsman may be out stumped off a wide delivery but cannot be stumped off a no ball as bowler gets the wicket while stumping.

Notes:

• The popping crease is defined as the back edge of the crease marking (i.e. the edge closer to the wicket. Therefore, a batsman whose bat or foot is on the crease marking, but does not touch the ground behind the crease marking, can be stumped. This is quite common if the batsman's back foot is raised so that only his toe is on the ground.
• The wicket must be properly put down in accordance with Law 28 of the Laws of cricket: using either the ball itself or a hand or arm that is in possession of the ball. Note that since the ball itself can legally put down the wicket, a stumping is still valid even if the ball merely rebounds from the 'keeper and breaks the wicket, even though never controlled by him.
• The wicket-keeper must allow the ball to pass the stumps before taking it, unless it has touched either bat or batsman first. If the wicket-keeper fails to do this, the delivery is a "no ball", and the batsman cannot be stumped (nor run out, unless he attempts to run to the other wicket).

Records

Most international stumpings - career

Form	Stumpings	Player	Matches
Test	52	Bert Oldfield	54
ODI	99	Kumar Sangakkara	404
T20I	32	Kamran Akmal	54
Last updated: 7 January 2017[3][4][5]

References

External links