Standel

The Standel Company is an American company that makes guitar amplifiers. It was founded in 1953 by Robert "Bob" Crooks in Temple City, California. Standel (a portmanteau of standard and electronics) was the name of Crooks' side-business of radio and hi-fi repair, located in his garage at 10661 Freer Street, Temple City, California.

History

Origins

In 1952, Bob Crooks was approached by inventor-musician Paul Bigsby, who advanced the engineer 75 dollars to build him a custom amplifier to go with the then famous Bigsby solid-bodied electric guitars and pedal steel guitars. It was the first Standel branded amplifier.

When designing the amplifier, Crooks played Les Paul's recording of the song Lover through the amplifier several times as a reference to adjust the sound. However, the final result was inappropriate for amplifying a musical instrument. Paul Bigsby played through the amp with one of his steel guitars and thought it "sounded terrible." Crooks noted the difference between building a guitar amplifier and building a standard hi-fi amplifier. As a result, Bigsby loaned Crooks a guitar so he could continue improving the amplifier.

Founding

For a time, Bigsby lost interest in the project—but Crooks kept working on his design. After several months, he came up with a design he was satisfied with. Its cabinet featured padded Naugahyde, aluminum guards around the cabinet, a lighted control panel, a JBL D-130 speaker, and independent bass and treble controls. Crooks's amplifier was both visually and sonorously appealing. He used his shop's name "Standel" as the amplifier's brand. He called the model the 25L15, because it had 25 watts of power and a Lansing 15-inch speaker. Bigsby eventually purchased a Standel 25L15, #1018 on April 10, 1954.

Ascent to popularity

Once satisfied with his design, Crooks started attending local concerts to spread the word about his amplifiers and get musicians to test them. The first one of these musicians was the late "Speedy" West. Crooks asked West, a steel guitarist to try out his amplifier at Cliffie Stone's "Hometown Jamboree" show. West liked it, and ordered the first Standel amplifier that night. Crooks then took his amp to the Town Hall Party dance in Compton, California, where Merle Travis and Joe Maphis were playing. They ordered the second and fourth Standel amplifiers.

Standel amplifiers benefited from a rise in popularity among professional musicians, though at a small scale. Only 64 amplifiers appear on "The Butcher List" (Crooks's handwritten chart of amplifiers and clients). Due to the high cost of building these amplifiers, (the JBL alone was $90, about 2–3 months rent in those days) they were used mostly by session musicians. Their high prices (about double a standard production amplifier) put them out of reach for most amateur musicians.

By 1963, Standel introduced hybrid amplification and by 1965 developed a full line of all solid-state amplifiers. From 1963 to 1969, to protect the designs from reverse engineering, Crooks coated the amplifier's modules in color-coded epoxy resin. With the exception of the Red Tremolo module (which usually fails), 95% of these circuits continue to function after 45–50 years. For those that need repair, the Standel website (www.standelamps.com) post all known epoxy module schematics to help technicians repair these amplifiers.

Downfall

In 1970, Standel unknowingly received a batch of defective output transistors that, over time, failed with a burst of direct current that also destroyed the speakers. The once dependable Standel brand began experiencing a high rate of warranty returns.

Eventually, in 1971, the cost to cover warranty repairs became too high for Standel to endure, so CMI (distributor of the Standel and Gibson brands) covered the cost, and in doing so acquired controlling interest in the company. By 1972, the Standel brand was replaced by SG Amplifiers (for "Standel Gibson") manufactured in the Standel factory at 4918 Santa Anita Ave., El Monte, California, as the SG Systems brand (often miscalled "SG System"). The SG line was a hybrid design (solid-state preamp, tube power amp) developed by Bob Crooks, and reminiscent of the original Standel hybrid designs of 1963.

After just over a year of operation, the SG line of amplifiers was discontinued. and the old factory closed down.

For the next 25 years, Crooks continued design work for various amplifier companies, including BBE, and developed the Sonic Maximizer. This circuit was licensed by numerous companies and is arguably Crooks' most successful design.

Reformation of Standel

In 1997, after 25 years of abandonment, the Standel Trademark became public domain, and Bob Crooks quickly secured it. Wanting to produce Standels again, and after a number of coincidences, Crooks came into contact with Danny "Sage" McKinney, the founder of Requisite Audio Engineering and through Franklin Garlock (Standel's west coast sales rep from the 1960s), requested a meeting with McKinney. McKinney, having first met Crooks when he was only 14 years old, saw him as a mentor and looked forward to seeing him again. Shortly after this reunion, Crooks offered McKinney the licensing to build and market Standels, with Crooks as technical advisor. For the next 10 years (1997-'07), they built Standels at the Requisite Audio Engineering shop in Glendale, California, 17 miles from the original Standel factory.

Over the next two years, Crooks's health began to fail and, in 1999, he died at 79 years. Crooks lived to see his original design reintroduced at the 1998 NAMM convention in Anaheim, California, 45 years after its introduction in 1953.

After Crooks's death, McKinney continued to operate the Standel Company under the original licensing agreement, granted by Crooks's widow, Deloris Crooks. In 2005, McKinney became the sole owner of The Standel Company and The Standel Company trademark.

Present

In 2007, the company was moved to Ventura, California, where they continue to build, to original specification, the Standel 25L15 and variations of the 50L15 and 100L15 models and Acoustic Magnifier versions of all models. They continue to use original (50-year-old) JBL D-130 speakers. Each speaker receives a specially developed surround edge treatment and full re-magnetization before being put into another 50 years of service, in a Standel amplifier.

Technical achievements

Standel was a pioneer in modern amplifier design; the following are some of the company's achievements.

Amplifiers models

Vintage Plus series

Combo amplifiers

Acoustic magnifiers

Speaker cabinets

Switchmaster series

Combo amplifiers

Power amplifier

High-gain heads

Speaker cabinets

Musical instruments

From 1961 to 1967, Standel had a short period as a manufacturer of stringed instruments. Bob Crooks made several attempts to market a Standel guitar. The first attempt resulted in 10 prototypes made by Semi Mosely. Joe Hall built the next line of guitars, a run of Mosrite-inspired double-cutaway guitars and a basses that featured an aluminum casting that housed the pickups, bridge and tailpiece. In 1967 Sam Koontz and The Harptone Manufacturing Co. designed and built a product line of 10 semi-hollow body and arch-top guitars, five acoustic models in six-string and 12-string variants and two basses: a semi-hollow body and the first production acoustic bass.

Notable users

References

    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.