Southern Pacific 4294

Southern Pacific
Type and origin Power type Steam Builder Baldwin Locomotive Works Serial number 70101 Build date March 1944
Specifications Configuration: ​  • Whyte 4-8-8-2 Articulated Consolidation Gauge 4 ft 8 1⁄2 in (1,435 mm) standard gauge Driver dia. 63 in (1,600 mm) Minimum curve 319.62 ft (97.42 m) radius or 18° Wheelbase 112 ft 2 in (34.19 m) (engine 67 ft 0.25 in or 20.43 m)(driver 44 ft 7 in or 13.59 m) Length 123 ft 8 in (37.69 m) (loco 78 ft 11 in or 24.05 m) Width 10 ft 0 in (3.05 m) Height 16 ft 4 in (4.98 m) Adhesive weight 531,700 lb (241,200 kg; 241.2 t) Loco weight 657,900 lb (298,400 kg; 298.4 t)[1] (boiler empty 576,800 lb) [2] Tender weight 393,300 lb (178,400 kg) (empty 160,000 lb or 73,000 kg) Total weight 1,051,200 lb (476,800 kg) Tender type Rectangular Model 220-R-6 Fuel type Bunker C (#6 fuel oil) Water cap Boiler 10,935 US gal (41,390 l; 9,105 imp gal) / Nathan 4000-C Non-Lifting Injector 12,000 gal/h (45 m3/h; 10,000 imp gal/h) Tender cap. 6,100 US gal (23,000 l; 5,100 imp gal) Oil 22,000 US gal (83,000 l; 18,000 imp gal) Water Sandbox cap. 2 short tons (1.8 t; 1.8 long tons) to front 3 drivers of both engines Firebox:  • Firegrate area 139 sq ft (12.9 m2) Boiler Diameter 108.125 in (2,746 mm) Boiler pressure 250 psi (1.7 MPa) Feedwater heater Worthington Type A6 Heating surface:  • Tubes 3,456 sq ft (321.1 m2)  • Flues 1,834 sq ft (170.4 m2)  • Tubes and flues 240 tubes / 91 flues  • Firebox 1,700 °F (930 °C) Superheater Elesco Type E Cylinder size 24 in × 32 in (610 mm × 810 mm) dia × stroke Valve gear Walschaerts Valve type dual piston "spool"
Performance figures Maximum speed 63 mph (101 km/h) Power output 6,000 hp (4,500 kW) at 45 mph (72 km/h) Tractive effort 124,300 lbf (553 kN) Towage Capacity 9,000 short tons (8,200 t; 8,000 long tons) Factor of adh. 4.28
Career Operators Southern Pacific Railroad Class AC-12 Number in class 20 Numbers 4294 Nicknames Cab Forward First run March 19, 1944 Retired March 5, 1956 Preserved one Restored May 1981, Cosmetic Current owner the city of Sacramento, California Disposition indoor static display at the California State Railroad Museum

Southern Pacific 4294 was the last steam locomotive ordered new by Southern Pacific Railroad (SP). It was built by Baldwin Locomotive Works in March 1944, and was used hauling SP's trains over the Sierra Nevada, often working on Donner Pass in California.

Construction and use

SP4294 was the last of 256 Southern Pacific articulated cab forwards starting with class AC-1. 4294 was the last in a group of 20 locomotives that comprised SP's AC-12 class of 4-8-8-2 cab forward locomotives. It is essentially two locomotives, linked together, sharing fire box, boiler and crew. Only the front locomotive has its cranks quartered 90 degrees apart. The front and back drive axles are free to roll out of phase with respect to each other. If unloaded, the locomotive has a vertical oscillation, near 50 mph, that can lift the tires above the rails.

Its most distinguishing feature was that the cab and firebox were at the front of the locomotive instead of the traditional rear. This was done essentially by running a 2-8-8-4 machine backwards with myriad modifications. The engineer and fireman swapped sides and faced away from the firebox. The tender was moved to behind the "new" locomotive back to improve forward vision. The smoke box end coupling was strengthened. The power reverse lever (Johnson Bar) and the steam throttle motion direction was reversed. The drive wheel axles are reversed, end for end without rekeying the return "fly" cranks, to reverse the expansion link timing on both sides.^[3]

Conventional Walschaerts return crank position in red

This specific SP design was a necessity in the long tunnels and snow sheds of Donner Pass and other mountainous regions where it kept smoke, heat, and soot away from the operating crew and offered them clean, cool air to breathe. It also provided the crew a superb view. It entered service on March 19, 1944, and was retired from active service on March 5, 1956.

Preservation

SP was convinced to preserve one of the class and donated 4294 to the city of Sacramento, California, where it was put on outdoor display October 19, 1958, at the SP station next to the C. P. Huntington, the railroad's first locomotive. Construction for Interstate 5 necessitated a move for the locomotive, and it was stored in the SP shops until May 1981. At that time it was moved again, this time to its current location, the California State Railroad Museum, where it remains on static display.

Had it not been for the negotiating efforts of the Railway and Locomotive Historical Society in the 1950s, 4294 likely would have been scrapped along with all of the other SP cab forward locomotives. As a result, 4294 is the only SP cab forward that has been preserved.

At one time, it was hoped that 4294 could be restored to operating condition. According to CSRM personnel, the biggest impediments toward such a project are the estimated costs and the current policies of both Union Pacific Railroad and BNSF Railway in regards to operations. The cost of such a restoration is estimated between $1 million and $1.5 million, an amount that the museum feels would be prohibitive given the current prospects for its eventual operation.^[4]

References

• Diebert, Timothy S. & Strapac, Joseph A. (1987). Southern Pacific Company Steam Locomotive Conpendium. Shade Tree Books. ISBN 0-930742-12-5. 

Wikimedia Commons has media related to Southern Pacific 4294.