Singapore Teleview

Singapore Teleview was a Singaporean videotext service. In the mid 1980s, the Telecom Authority of Singapore entered into a joint venture development with GEC Marconi in the UK to develop a photo-videotext public service. Selected engineers were sent to the UK to work within the Marconi development team stationed at Fleet, Hampshire, England. Singapore was the first country in the world to launch an interactive information service to the public which included photographic images. The service started trials during late 1987 using specifically designed terminals. Controlled trials had been conducted since 1987 as the infrastructure was installed and trialed successfully. It finally went into full public service in 1991.

Overview

Subscribers connected to the Teleview, now-defunct, service by SingTel, via a dial up connection initially by 1200–2400 bit modems (v.22bis) and then later via 9600-14400 kbit/s modems. Pages with photographic images were sent to the terminal by Full Field Teletext transmissions from dedicated data inserters/UHF TV Transmitters. Subscribers initially paid no time based usage fee for this service. However, later charges, on top of telephone line charges were levied. A later development from Teleview provided an interfaced connection to the Internet, subscribers were given access to the Internet via a text-only terminal; email was accessed by Pine, and webpages were viewed by Lynx. Subsequently, Teleview was rendered obsolete, and SingNet started offering to the Internet via Serial Line Internet Protocol/Point-to-Point Protocol (SLIP/PPP) over modem.

System

The information storage and delivery system was based upon GPT4190 computers coupled to dial in modem for public to access and via microwave link to a UHF TV Transmitter fitted with full field teletext inserters. Transmission of lower level protocol data and user terminal management control was via telephone V22 modem. High level data such as Geometric and photographic displays sent exclusively by full field teletext with interchange control and handshaking via V22 modem. The service profile is based upon extensions to the existing CEPT Videotext Services Recommendations T/CD 6-1 as defined in Teleview Videotext Service Profile and Data Standard Ref; 7630/DS/1 1987.

Terminal

The terminal was based upon two Motorola 68000 processors as a general main computer and control and the second as a video processor interfaced to VRAM video memory with shift register to output. A further processor based upon Texas Instruments TMS7000 as the control for the field field teletext, RF tuning control and packet decoding for 8 bit data transfer to the main processor as well as a Micronas MAS2122 Modem chipset for the telephone interface. RF Tuning was achieved by Telefunken multiband tuner, voltage tuned via SP5000 with the channel selection supplied by the TMS7000. This tuner with agc IF detection provides the composite video to the data slicer (TMS3556) and data detector/converter (TMS3551)under control from the TMS7000 (TMS77C82 mask programmed version). Further more the main processor operated as a computer running Metacomco BASIC software with keyboard entry via an infrared coupled standard qwerty keyboard with additional keys to select videotext, teletext or PC modes.

See also

References

    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.