Saxon X V

Saxon X V
DRG Class 14.2
Number(s) 175–176, 183–195
DRG: 14 201–215
Quantity 15
Manufacturer Sächsische Maschinenfabrik, Chemnitz
Year(s) of manufacture 1900 (prototypes)
1902/03 (production)
Retired 1926
Wheel arrangement 4-4-2
Axle arrangement 2'B1' n4v
Track gauge 1,435 mm (4 ft 8 1⁄2 in)
Length over buffers 20,353 mm (66 ft 9.3 in)
Empty weight 61.9 t / 62.0 t
Service weight 69.3 t / 69.4 t
Adhesive weight 32.0 t / 31.4 t
Axle load 16.0 t / 15.7 t
Top speed 120 km/h (75 mph) / 100 km/h (62 mph)
Indicated Power 1,060 PSi
Driving wheel diameter 1,980 mm (6 ft 6 in)
Leading wheel diameter 1,065 mm (3 ft 5.9 in)
Trailing wheel diameter 1,240 mm (4 ft 1 in)
Valve gear Walschaerts (Heusinger)/Joy
LP cylinder bore 555 mm (21.9 in)
HP cylinder bore 350 mm (14 in)
Piston stroke 660 mm (26 in)
Boiler Overpressure 15 bar
No. of heating tubes 222
Heating tube length 4,700 mm (15 ft 5 in)
Grate area 2.41 m2 (25.9 sq ft) / 2.38 m2 (25.6 sq ft)
Radiative heating area 13.7 m2 (147 sq ft) / 13.3 m2 (143 sq ft)
Tube heating area 151.5 m2 (1,631 sq ft) / 147.5 m2 (1,588 sq ft)
Evaporative heating area 165.2 m2 (1,778 sq ft) / 160.8 m2 (1,731 sq ft)
Tender sä 2'2' T 18
sä 2'2' T 19.5
sä 2'2' T 21
Brakes Westinghouse compressed-air brake
Tachometer Hausshälter

The Royal Saxon State Railways designated four-coupled, Atlantic (4-4-2) express locomotives as Class X and the Deutsche Reichsbahn subsequently grouped these locomotives into DRG Class 14.2 in 1925.

History

In 1900 the Sächsische Maschinenfabrik engineering works built the first two express locomotives of the new four-coupled, Atlantics with a four-cylinder compound engine. One of the locomotives was displayed at the Paris World Exhibition in 1900 and was awarded the Grand Prix.

The Royal Saxon State Railways took over the two prize-winning locomotives and procured another 13 up to 1903 that differed from the prototypes, particularly in terms of the diameter of the carrying axles. They were the largest and most powerful locomotives in Saxony to that point. The X V was employed on express train duties on the plains where its riding qualities and economy were impressive.

In 1920 the Deutsche Reichsbahn took over all 15 engines and gave them the new numbers 14 201–215 in 1925. They were retired by 1926.

Technical features

The locomotives had a boiler with a Belpaire firebox, which was located between the frame sides. Two injectors provided the boiler feedwater.

The steam engine was designed as a de Glehn four-cylinder compound. The outer high-pressure cylinders drove the second coupled axle, whilst the inside low-pressure cylinders drove the first. The motion for the engine was a Walschaerts valve gear on the outer cylinders and a Joy valve gear on the inner ones.

Braking for locomotive and train was provided by a Westinghouse compressed-air brake. On the two prototypes the air pump was on the right, on the remaining locomotives it was installed on the left hand side.

The coupled axles were fixed to the frame. The leading bogie was an Erfurt design, the trailing axle was an Adams axle.

The locomotives were coupled with Saxon tenders of classes sä 2'2' T 18, sä 2'2' T 19.5 and sä 2'2' T 21.

Service

The locomotives were only in express train service on the Leipzig–Dresden railway for a few years before the four-coupled engines proved too underpowered for the steadily climbing train loads. The X V was then deployed mainly on the passenger trains from Dresden to Bodenbach, Leipzig and Zittau until its retirement.

See also

Sources

    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.