Saturn MLV

The Saturn MLV was a proposed concept family of rockets, intended as a follow-on to the Saturn V. MLV stands for "Modified Launch Vehicle".

Vehicle configurations representative of several alternative uprating methods were specified by the Marshall Space Flight Center for initial studies.

Proposed Modifications

  1. Thrust uprating and modifying of the five F-1 rocket engines used in the first S-IC stage, and corresponding increases in propellant tank capacities.
  2. Addition of a sixth F-1 engine in the S-IC stage, as an alternative to engine uprating, plus increased propellant capacities.
  3. Use of solid rocket motor boosters derived from the Titan IIIC vehicle.
  4. Additional J-2 (rocket engine)s in the S-II stage, 131~s increased upper stage propellant capacities.
  5. Improved or advanced upper stage engines, such as the HG-3 (rocket engine), plus increased propellant capacities.

The baseline Saturn MLV would incorporate these changes from the Saturn V vehicle. Saturn IC (first stage) stretched 240 inches with 5.6 million pounds propellant and 5 new F-1A engines; S-II (second stage) stretched 41 inches with 1.0 million pounds propellant and 5 J-2 engines; S-IVB (third stage) strengthened, but with standard 230,000 lbs propellant, 1 J-2 engine.

MLV Variants
1st Stage 2nd Stage 3rd Stage LEO Payload
MLV-V-1 MS-IC-1 MS-II MS-IVB 137,250 kg
MLV-V-1A MS-IC-1A MS-II-1A MS-IVB-1A 145,000 kg
MLV-V-1/J-2T/200K MS-IC-1 MS-II-1-J-2T/200K - -
MLV-V-1/J-2T/250K MS-IC-1 MS-II-1-J-2T/250K - -
MLV-V-2 MS-IC-1 MS-II-1 MS-IVB-2 137,250 kg
MLV-V-3 MS-IC-1 MS-II-2 MS-IVB-2 160,440 kg
MLV-V-4(S)* S-IC MS-II-4(S)B MS-IVB-1 118,000 kg
MLV-V-4(S)-A* MS-IC-4(S)-B MS-II-1 MS-IVB-1 160,880 kg

*) Indicates zero stage strap on boosters. In both cases 4x-Titan UA-1205

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.