Salto Santiago Hydroelectric Power Plant

Salto Santiago Dam
Location of Salto Santiago Dam in Brazil
Official name Salto Santiago Hydroelectric Power Plant
Location Osório, Paraná, Brazil
Coordinates 25°37′04″S 52°36′48″W / 25.61778°S 52.61333°W / -25.61778; -52.61333Coordinates: 25°37′04″S 52°36′48″W / 25.61778°S 52.61333°W / -25.61778; -52.61333
Opening date 1980
Owner(s) Tractebel Energia
Dam and spillways
Type of dam Embankment, rock-fill
Impounds Iguazu River
Height 80 m (260 ft)
Length 1,400 m (4,600 ft)
Dam volume 518,200 m3 (18,300,000 cu ft) (Concrete)
Spillway type Service, controlled
Spillway capacity 24,000 m3/s (850,000 cu ft/s)
Reservoir
Creates Salto Santiago Reservoir
Total capacity 4,094,000,000 m3 (3,319,000 acre·ft)
Catchment area 43,330 km2 (16,730 sq mi)
Surface area 208 km2 (80 sq mi)
Power Station
Commission date 1980-1982
Type Conventional
Turbines 4 x 355 MW (476,000 hp) Francis turbines
Installed capacity 1,420 MW (1,900,000 hp)
Annual generation 2,137.46 GWh (7,694.9 TJ)

The Salto Santiago Hydroelectric Power Plant is a dam and hydroelectric power plant on the Iguazu River near Santiago in Paraná, Brazil. It is the third dam upstream of the Iguazu Falls and was completed in 1979.[1][2] The power station has a 1,420 MW capacity and is supplied with water by a rock-fill embankment dam.

It is owned and operated by Tractebel Energia.

Salto Santiago Dam

The Salto Santiago Dam is 80 metres (260 ft) high, 1,400 metres (4,600 ft) long and is of rock-fill embankment type, comprising 518,200 cubic metres (18,300,000 cu ft) in concrete structure. The dam's spillways contains nine 21.5-metre (71 ft) wide and 15.3-metre (50 ft) wide radial gates and has a maximum capacity of 24,000 cubic metres per second (850,000 cu ft/s). The reservoir formed behind the dam contains 4,094,000,000 cubic metres (3,319,000 acre·ft) of total storage with a surface area of 208 square kilometres (80 sq mi) and a catchment area of 43,330 square kilometres (16,730 sq mi). The average flow of the river through the dam is 902 cubic metres per second (31,900 cu ft/s) and the reservoir has a normal operating level of 506 metres (1,660 ft).[3]

Power plant

The power plant at the southern end of the dam contains four 355 megawatts (476,000 hp) hydroelectric generators powered by Francis turbines. Each turbine has a rated discharge of 346 cubic metres per second (12,200 cu ft/s) and is fed by a 7.6-metre (25 ft) diameter steel penstock which provides a gross hydraulic head of 106 metres (348 ft). The remaining two penstocks are intended for future generators with a plant expansion. The first generator was commissioned on December 31, 1980, with another in 1981, two in 1982 the last of which was commissioned on September 16, 1982.[3][4]

See also

References

  1. "Parana River Basin Study Area - Figure 1". The Scientific Electronic Library Online. Retrieved 11 September 2010.
  2. Valente, Marcela (March 30, 2009). "Planned Dam Above Famous Falls Draws Fire". IPS. Retrieved 11 September 2010.
  3. 1 2 "Technical Specs - HPP Salto Santiago - UHSS". Tractebel Energia. Retrieved 11 September 2010.
  4. "Salto Santiago Hydroelectric Plant - PR" (in Portuguese). Ministry of Transport. 2003. Retrieved 11 September 2010.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.