Sacramento-class fast combat support ship
 USS Camden (AOE-2) | |
| Class overview | |
|---|---|
| Name: | Sacramento |
| Builders: | |
| Operators: |
 United States Navy |
| Preceded by: | N/A |
| Succeeded by: | Supply-class fast combat support ship |
| In commission: | 1964 - 2005 |
| Completed: | 4 |
| Retired: | 4 |
| General characteristics | |
| Type: | fast combat support ship |
| Displacement: | 53,000 tons |
| Length: | 795 feet (242.3 m) (overall) |
| Beam: | 107 feet (32.6 m) (extreme) |
| Draft: | 39 feet (11.9 m) |
| Propulsion: | 4 boilers producing 600 psi (4,100 kPa) at 856 degrees Fahrenheit; super-heated steam driving 2 × turbines, producing 100,000 horsepower (75 MW) at 4,829 rpm |
| Speed: | 26 knots |
| Complement: | 24 officers, 576 enlisted |
| Armament: | |
| Aircraft carried: | CH-46E Sea Knight |
The Sacramento-class fast combat support ships were a class of four United States Navy supply ships used to refuel, rearm, and restock ships in the United States Navy in both the Atlantic and Pacific Oceans.
History
The idea of combining the capabilities of a fleet oiler (AO), ammunition ship (AE), and refrigerated stores ship (AF) had been conceived during the Second World War by Admiral Arleigh Burke, later Chief of Naval Operations, who sought to create a single ship that would perform the functions of three vessels while simultaneously integrating into a carrier battle group. This was deemed necessary because World War II replenishments had to be scheduled well in advance due to communications problems and were subject to change due to weather or combat related reasons. On top of that the Underway Replenishment Groups of that time were slow and unwieldy. After experimenting with this "replenishment oiler" concept with the German war prize Dithmarschen (placed in service as USS Conecuh (AOR-110)), the US Navy's solution to these problems was to create a multi-product station ship, which resulted in the construction of the Sacramento class. The Sacramentos had been designed to carry more fuel and ammunition than the largest ammunition ships then in service with the US Navy. The AOEs were also designed to be much faster than previous auxiliaries at 26 knots, giving them the ability to operate in company with a carrier battle group rather than in a separate, slower replenishment group. The speed was obtained by giving each ship one-half of the powerplants removed from the unfinished Iowa-class battleships Illinois and Kentucky.
To fulfill the same role in the less demanding Anti-Submarine Support Aircraft Carrier (CVS) groups, the navy built the similar, but smaller and slower, Wichita-class AORs.
Construction of the unnamed AOE-5 was cancelled in 1968.[1] There are no Sacramento-class ships in service with the Navy, the last one being retired in 2005.
The ships that now fulfill this role for the U.S. Navy are the Supply-class fast combat support ships. Those ships are not commissioned ships of the Navy; rather they are operated by the Military Sealift Command.
Ships
| Ship | Hull No. | Builder | Commissioning– Decommissioning | NVR Page |
|---|---|---|---|---|
| USS Sacramento | AOE-1 | Puget Sound Naval Shipyard | 1964–2004 | AOE1 |
| USS Camden | AOE-2 | New York Shipbuilding | 1967–2005 | AOE2 |
| USS Seattle | AOE-3 | Puget Sound Naval Shipyard | 1969–2005 | AOE3 |
| USS Detroit | AOE-4 | Puget Sound Naval Shipyard | 1970–2005 | AOE4 |
Notes
- ↑ "AOE-1 Sacramento Fast Combat Support Ship". Federation of American Scientists. March 5, 1999. Retrieved 2008-03-02.