Royal Enfield Bullet
Manufacturer |
Royal Enfield (1931–1966) Royal Enfield Motors (1955–present) |
---|---|
Production | since 1931 |
Class | Standard |
Engine | 346 cc & 500 cc single cylinder cast-iron, lean-burn, or UCE, OHV |
Transmission | 4-speed Albion gearbox / 5-speed left-shift gearbox / 5-speed integrated gearbox |
Wheelbase | 1,370 mm (54 in) |
Dimensions |
L: 2,120 mm (83 in) W: 750 mm (30 in) H: 1,080 mm (43 in) |
Fuel capacity | 3.5 imp gal (16 l; 4.2 US gal) |
The Royal Enfield Bullet was originally a British overhead valve single cylinder four-stroke motorcycle made by Royal Enfield in Redditch, Worcestershire, now produced by Royal Enfield Motors, the successor to the British company, at Chennai, Tamil Nadu, in India. The Royal Enfield Bullet has the longest production run of any motorcycle having remained continuously in production since 1948.[1][2] The Bullet marque is even older, and has passed 75 years of continuous production. The Royal Enfield and Bullet names derive from the company's links with the Royal Small Arms Factory in Enfield, London.[2]
Evolution
The Bullet has evolved from a four-valve engine with exposed valve-gear to the latest all-alloy unit construction engine with electronic fuel-injection.
1931–1939
Manufacturer | Royal Enfield, UK |
---|---|
Production | 1931–1939 |
Successor | Royal Enfield Bullet |
Engine | 346 cc & 499 cc single cylinder OHV |
Introduced in 1931 as a four-stroke single cylinder motorcycle, this model was the first to feature the Bullet name. It differed in a number of ways from its successors (which are now familiar): it had an inclined engine with exposed valve gear featuring four valves per cylinder with 350 cc and 500 cc options. In 1933, a 250 cc option was also added to the range.[3] Its frame was also considerably different, having centre-spring girder front forks, being among a new range of models from Royal Enfield that featured them, along with a saddle-type fuel tank. However, common to motorcycles of this period, it had a rigid rear-end, necessitating a 'sprung' seat for the rider, which resulted in the iconic look of the motorcycle that is much replicated today, even though the sprung seat is unnecessary in modern models.
After competition success the 350 cc Royal Enfield Bullet was bought by the British Army for dispatch riders and 3,000 were also supplied to the RAF during the Second World War.
1939–1949
Manufacturer | Royal Enfield, UK |
---|---|
Production | 1939–1948 |
Successor | Royal Enfield Bullet 350 |
Engine | 346 cc single cylinder OHV |
This model refreshed Royal Enfield's model line-up for 1939. It differed in cosmetic details, as well as in having two rocker boxes, which resulted in higher volumetric efficiency for the engine. The basic design with front girder forks was retained.
1949–1956
Manufacturer | Royal Enfield, UK |
---|---|
Production | 1948–1956 |
Successor | Royal Enfield Bullet 350/500 |
Engine | 346 cc & 499 cc single cylinder OHV |
A number of changes were implemented in order to bring the bike up-to-date. This model featured a vertical engine with alloy head and higher compression. The frame was changed to a fully sprung design using a swing-arm with non-adjustable hydraulic shockers at the rear, while the front used a brand-new telescopic fork of Royal Enfield's own design. This enabled the introduction of a bench seat made of simple foam and with no large springs. Power transmission was via the same four-speed Albion gearbox as the previous model, with a unique 'neutral-finder' lever the rider could press from any gear other than first to shift to neutral. The crankshaft continued to have a fully floating big-end bearing. The headlight assembly was enclosed with the speedometer and ammeter into a nacelle, which also served as the attachment of the front suspension as well as the handlebars. An otherwise similar model, but with engine displacement of 499 cc, made its debut in 1953.
The prototype had done well in a performance trial and went on to win the trophy[4] at the 1948 International Six Days Trial and two Bullet riders won gold medals.[5] In 1952 Johnny Brittain won the Scottish Six Days Trial on a Royal Enfield Bullet and in 1953 he also won the International Six Days Trial without losing a single point.[1]
In 1949, the Indian Army ordered Royal Enfield Bullets for border patrol use and the company decided to open a factory in Madras. In 1955, the 350 cc Bullets were sent from the Redditch factory in kit form for assembly in India, but Enfield India Ltd. soon developed the factory and produced complete motorcycles independently under licence. The 1955 model remained almost unchanged for years and Madras produced over 20,000 Bullets annually.[3]
1956–1964
Manufacturer | Royal Enfield, UK |
---|---|
Production | 1956–1964 |
Successor | Royal Enfield Bullet 350/500 |
Engine | 346 cc & 499 cc single cylinder OHV |
In 1955, Royal Enfield carried out some retooling and redesign at their Redditch plant, in the UK, to modernise the Bullet, and in 1959 some changes were made to the gear ratios. These changes, however, were not incorporated by the Indian arm due to its commitment to supply the Indian Army. Thus the British and Indian lines diverged, never to meet again.
Between 1956 and 1960, the British Bullet was released in several models, including a 350 cc Trials "works replica" version, a 350 cc "Clipper" model and in 1958 the Airflow version. This model had full weather protection from a large fibreglass fairing and included panniers for touring. The design was developed in partnership with British Plastics and featured as a series in The Motor Cycle magazine.[6] The engines were the same and the only differences were in exhaust, seating, instrumentation, handlebars and fuel tank. Numerous technical improvements were also made, including moving to alternator charging (1956) and coil ignition (1960). The 350 cc model continued in production, but the 500 cc model was discontinued in 1961. In 1962, the UK company was sold and the Bullet discontinued and in 1967, the Redditch factory closed. Finally, in 1970, Royal Enfield closed down completely.[7]
Additional to the 'separate gearbox' Bullet the Royal Enfield Redditch factory produced approximately 250 'unit construction' (integral gearbox) Bullets bikes known as 'New Bullets'. Produced in five batches of fifty between 1963 and 1965 these models were essentially a 350 Crusader. However, unlike their 'one piece cranked' smaller sibling the New Bullet had a built up crank and the traditional Bullet bore and stroke dimensions under a Crusader cylinder head. These bikes are difficult to identify as being different from the Crusader. Look for a ten finned barrel on a Crusader and you will have found a New Bullet. By necessity the tool box air intake slot is also a little higher. Other variations from the unit 250 include a 46 tooth rear sprocket, an outrigger bearing on the primary side crankcase a four plate clutch and wider gear cogs. The petrol tank is similar to the earlier unit range item (not the Clipper tank) but has a larger cut out on the underside to clear the taller motor making it 1/4 gallon light on capacity. A New Bullet was modelled for sale to the army and carried panniers and a 'speedo-only' style of caskette. According to RE data 232 of these bikes were produced making them a very rare and desirable machine today.
1965–1995
Manufacturer | Enfield Ltd., India |
---|---|
Production | 1955–1995 |
Successor | Royal Enfield Bullet 350/Electra/Machismo |
Engine | 346 cc single cylinder OHV |
Enfield India Ltd. continued production of the 1955 Bullet design almost unchanged, re-introducing it to the British market in 1977 under the name 'Enfield'. This was a period of stagnation for the Bullet.
Due to the protectionist nature of the Indian economy, no need for improvement was apparent, and the brand survived into the 1990s essentially as a domestic Indian commuter bike. Equivalent bikes in the market were the Yamaha RD350 and the Yezdi. Both bikes enjoy a cult following in India, but have been out of production for decades. However, this could not prevent the erosion of the bike's market once the economy was sufficiently opened up to allow the Japanese motorbikes. The bike's relatively high fuel consumption (although the Bullet engine is fuel-efficient, its main competition was from bikes with 100 cc engines) caused a descending spiral of sales until the company, near bankruptcy, was bought out by Eicher Motors, a tractor and commercial vehicle manufacturer.
1995–1997
Manufacturer | Royal Enfield Motors, India |
---|---|
Production | 1995–1997 |
Successor | Royal Enfield Bullet 350/Electra 4s/Electra 5s/Machismo 500 |
Engine | 346 cc single cylinder cast-iron or lean-burn, OHV |
Under the newly appointed CEO of Enfield India, Siddhartha Lal, Eicher undertook major investment in the ailing firm. This was started with the purchase of trademark and intellectual property rights of the defunct British Royal Enfield firm, changing the name of the company to Royal Enfield Motors. Many management and production changes were made, with the production process being streamlined and excess capacity redistributed. Without the large-scale Army/Law Enforcement orders to bail the company out, there was only the individual sales route in which the company had to perform if it were to survive at all. The company also faced the difficult task of catering to a very diverse market. To preserve the Bullet's nature and reputation as a classic British bike, as the Raja Gaadi, and to attract youngsters away from the newly appeared performance motorcycle market, the Bullet marque was split up into two. The Bullet Standard 350 featured all the increased manufacturing quality and reliability but was maintained in the traditional 'Bullet' look, available only in black. A new model, available in more colours and chrome accents, CDI electronic ignition, and gas-charged shock absorbers - but with the same engine and gearbox as the Standard - was launched. This model was called the 'Bullet Electra'. The Electra 350 went on to become the best-selling Royal Enfield model, accounting for around half the company's sales.
Alongside these developments, Austrian engine firm AVL was contracted to produce an all-alloy engine suitable as a drop-in replacement for the cast-iron block original engine (with design dating from 1955). The first bike with this engine was launched as the Bullet Machismo 350. This engine did not sell well in the Indian market; many prospective buyers were surveyed as saying that it didn't sound the same as the old engine, lacking the 'thump' noise of its predecessor. The engine did succeed in the Thunderbird model, a chopper style cruiser from Royal Enfield Motors. Also seen was the introduction of a disc-brake on the front wheel as a factory option domestically, and standard on exported models. and smooth drive
1997–2009
Manufacturer | Royal Enfield Motors, India |
---|---|
Production | 1997–2007 |
Successor | Royal Enfield Bullet 350/Electra 4s/Electra 5s/Machismo 500/Classic |
Engine | 346 cc & 499 cc single cylinder cast-iron or lean-burn, OHV |
Ever tighter European emission norms forced the Bullet Standard 350 to end 2007 as its last model year in the EU, so when on-hand stocks were all sold the British-design engined Bullet became no longer available new. All new models exclusively featured the AVL 'lean-burn' engine. The introduction of a five-speed gearbox meant that Royal Enfield could 'fix' one of the long-standing quirks of the Bullet design—the foot-brake is on the left side while the gearshift is on the right. Accordingly, the Bullet Machismo 350 was equipped with this gearbox and a big hit in market which was rich in design and first chrome model in enfield. However, the 'left-shift' gear change provoked a backlash from Indian Bullet customers, forcing the company to not only continue the Bullet Standard with the traditional system, but even on the Electra it was offered only as an option, leading to the Electra four-speed (traditional) and Electra five-speed (left-shift) variants. Sales figures indicated that Indian Bullet customers had shunned the new gearbox, foregoing even the attraction of five-speed transmission to keep the gearshift traditional. However, it became standard fitment on all exported models. New developments included the addition of electric start as an option on some models, while standard on others. In 2007 and 2008, a limited edition, heavily accessorised 500 cc lean-burn Machismo 350 and 500 was produced where the motorcycle features 40.85 Nm of torque at 3000 rpm, unique 19 -inch wheels, 280 mm front disc brake & the same engine chassis configuration being exported to Europe, USA & Australia. Only 500 motorcycles will be made available country-wide.. The Machismo 350 was discontinued which is high demand in market right now.
Since 2007
Manufacturer | Royal Enfield Motors, India |
---|---|
Production | 2007–present |
Engine | 346 cc, 499 cc & 500 cc single cylinder cast-iron, lean-burn (AVL), or UCE, OHV |
As a result of work spanning several years, a new set of engines was introduced. These were the unit construction engines (UCE). The 350 cc UCE found use in the domestic model Thunderbird TwinSpark in a configuration with two sparkplugs per cylinder, with integrated 5-speed left-shift gearbox. It has not been featured on any of the Bullet models, domestic or otherwise. By 2011, the old cast-iron engine had been completely phased out, including in the Standard 350 model. Now all Royal Enfield bikes are only available with the all-aluminium UC engine.
The 500 cc UCE features fuel injection system, and has greater power than any Royal Enfield 500 cc motor. The 500 cc UCE, with an integrated five-speed gearbox, powers the current Bullet Classic model. Starting in 2009, this engine was available only in the EU to satisfy emissions regulations,[1] but as of 2010 it is available in the United States under two frame models, the Bullet Classic C5,[8] or the Bullet G5, which looks similar and shares paneling with the earlier AVL Electra models. In 2011 a third export model, the B5, was introduced combining the newer 500 cc UCE engine with the traditional Indian domestic tank and frame.
Custom models
Swiss motorcycle tuner and Royal Enfield distributor Fritz W. Egli made a custom Bullet using Egli's central tube frame constructed from nickel-plated chromium-molybdenum steel, and a longer stroke crankshaft (105 mm) engine with special main bearings, dry clutch, timing belt primary drive, and 36 mm Keihin flat-slide carburettors.[9]
Other custom versions of the Bullet are the Musket, made in Ohio, and the Australian designed Carberry.[10][11][12]
References
- 1 2 3 "Bullet Classic Range". Retrieved 2008-12-16.
- 1 2 "Ep1". Our Guy in India. 2015. Channel 4.
- 1 2 Brown, Roland (1999). The History of British Bikes. Paragon. ISBN 0-7525-3153-0.
- ↑ "The story of Royal Enfield in the ISDT".
- ↑ Kemp, Andrew; De Cet (2004). Classic British Bikes. Mirco. Bookmart Ltd. ISBN 1-86147-136-X.
- ↑ Reynolds, Jim (1990). Best of British Bikes. Patrick Stephens Ltd. ISBN 1-85260-033-0.
- ↑ "The Royal Enfield Bullet a brief history". Archived from the original on 2008-05-10. Retrieved 2008-12-13.
- ↑ Richard Backus (May–June 2011). "Riding the 2010 Royal Enfield Bullet Classic C5". Motorcycle Classics. Retrieved 2011-05-20.
- ↑ "EGLI Royal Enfield Super Bullet". Archived from the original on 14 February 2014. Retrieved 2008-12-13.
- ↑ "Jay Leno saddles up on an updated Royal Enfield motorcycle", Autoblog, 6 July 2015, retrieved 16 March 2017
- ↑ "Royal Enfield Musket V-twin", BikeEXIF, 25 November 2015
- ↑ "Carberry Enfield moves operations to India". Overdrive. Retrieved 16 March 2017.
External links
Wikimedia Commons has media related to Royal Enfield motorcycles. |