Rover 400 / 45

Rover 400 Series Rover 45
Overview
Manufacturer	Rover
Production	1990–2005
Assembly	United Kingdom: Longbridge, Birmingham
Body and chassis
Class	Small family car
Layout	Front-engine, front-wheel-drive
Chronology
Predecessor	Rover 200 (SD3)

The Rover 400 Series, and later the Rover 45, are a series of small family cars that were produced by the British manufacturer Rover from 1990 to 2005. The car was mutually developed during Rover's collaboration with Honda; the first-generation 400 was co-developed with the Honda Concerto and the Mk2 400 being based on the Honda Domani/Civic. Honda petrol engines were used in some Rover models, conversely the market competitive Rover L-series diesel engine was used from the mid 1990s in Hondas, before they designed their own diesel engine.^[1]

Rover 400 (R8; 1990–1995)

Rover 400 (R8)
Overview
Production	1990–1995 (saloon) 1993–1998 (estate)
Body and chassis
Body style	4-door saloon 5-door estate
Related	Honda Concerto Rover 200 (R8)
Powertrain
Engine	1.4 L K-Series I4 (petrol) 1.6 L I4 (petrol) 2.0 L M-Series I4 (petrol) 1.8 L PSA XUD I4 (t/c diesel) 1.9 L PSA XUD I4 (diesel)
Dimensions
Wheelbase	2,550 mm (100.4 in)
Length	4,370 mm (172.0 in)
Width	1,680 mm (66.1 in)
Height	1,400 mm (55.1 in)

The original 400 Series, launched as a four-door saloon in April 1990, was simply a saloon version of the second-generation Rover 200 Series hatchback, both sharing the codename R8 during development. The 200 Series had been launched six months earlier.

Like the 200, the model was designed in collaboration with Honda (who produced the corresponding designed-for-Europe Concerto model) and both models would share production lines at Rover's Longbridge facility. It used the same core structure and mechanicals as the Honda, but the rear-end redesign of the glasshouse and body were unique to Rover. Interior trim and electrical architecture were all shared with the R8 Rover 200.

Rear of Rover 416 GSi 16v MK1

Rover 400 Tourer (Europe)

An estate—or station wagon—version was subsequently developed by Rover Special Products. Badged as the 'Rover 400 Tourer', this remained in production alongside the second generation 400 until 1998, as no estate version of the later car was built. Many of the 400 Tourers were exported to Japan.

The R8 Rover 200 and 400 were the first applications of Rover's K-Series family of engines (appearing in 1.4 L (1,396 cc) twin-cam 16-valve form). The 1.6 L (1,590 cc) version used either a Honda D16A6 and D16Z2 SOHC or D16A8 DOHC powerplant, while the 2.0 L M-Series unit from the 800-series followed soon afterwards (1991) in the sportier versions. The Rover-engined models drove the front wheels via jointly developed Peugeot/Rover R65 gearboxes (1.4 litre) and licence built Honda-designed PG1s for the 1.6 and 2.0-litre versions. The Rover 420 GSI turbo and GSI Sport turbo, produced in limited numbers, were equipped with the turbocharged 197 bhp (147 kW) Rover T-Series engine.

Also available were two PSA (non-electronically controlled Lucas CAV injection pumps) Indirect injection diesel engines, with the choice of naturally aspirated 1.9-litre XUD9 or turbocharged 1.8 XUD7T engines. They were class leading in their refinement in Peugeot and Citroen installations, but less refined in the Rovers. These engines were installed instead of the non-electronically controlled Bosch HPVE Direct Injection Rover MDi / Perkins Prima used in the Austin Maestro and Montego, because that engine, with its noisy combustion but lower fuel consumption, was deemed too unrefined for the new models.

A mid-life facelift (also applied to the Rover 200) saw the reintroduction of the Rover grille which had also reappeared on the R17 facelift of the Rover 800. This change was achieved without significant change to the remaining structure, but provided a more distinctive Rover "family look" and establish a certain distance from the Honda Concerto.

Rover 400 (HH-R; 1995–1999)

Rover 400 (HH-R)
Overview
Production	1995–1999
Body and chassis
Body style	4-door saloon 5-door hatchback
Related	Honda Domani Rover 200 (R3)
Powertrain
Engine	1.4 L K-Series I4 (petrol) 1.6 L K-Series I4 (petrol) 1.6 L D-Series I4 (petrol) 2.0 L T-Series I4 (petrol) 2.0 L L-Series I4 (t/c diesel)
Dimensions
Wheelbase	2,620 mm (103.1 in)
Length	4,320 mm (170.1 in)
Width	1,695 mm (66.7 in)
Height	1,390 mm (54.7 in)

Rover 400 saloon rear

Rover 400 hatchback rear

The dashboard of a Rover 400

The second generation 400 Series, codenamed Theta or HH-R, was launched in the summer of 1995 as a hatchback and later a saloon. This time it was based on the Honda Domani, which had been released in Japan in 1992, and was sold as part of the European Honda Civic range in five-door hatchback form. It was no longer as closely related to the 200 Series, which was revised independently by Rover but still shared many components with the 400. Power came from 1.4 and 1.6-litre K-Series, 1.6-litre Honda D series SOHC (Automatic gearbox only) and 2.0 L Rover T Series petrol engines, as well as a 2.0-litre L-Series turbodiesel from the more luxurious 600 Series.

This was due as Rover's only offering in the compact car segment at the time was the ageing Montego and this gap in the company's line-up needed to be filled. A saloon version was later introduced for the 400.

The related Honda Civic was not sold as a saloon in the United Kingdom, although a four-door version was available in other markets. This helped to expand the appeal of the Rover model up-market into the executive car segment, and to better differentiate the two cars.

Rover 45 (1999–2005)

Rover 45
Overview
Production	1999–2005
Body and chassis
Body style	4-door saloon 5-door hatchback
Related	Honda Domani Rover 25 MG ZS
Powertrain
Engine	1.4 L K-Series I4 (petrol) 1.6 L K-Series I4 (petrol) 1.8 L K-Series I4 (petrol) 2.0 L KV6 V6 (petrol) 2.0 L L-Series I4 (diesel)
Dimensions
Wheelbase	2,620 mm (103.1 in)
Length	4,360 mm (171.7 in) (1999–2004 hatchback) 4,520 mm (178.0 in) (1999–2004 saloon) 4,386 mm (172.7 in) (2004–2005 hatchback) 4,540 mm (178.7 in) (2004–2005 saloon)
Width	1,695 mm (66.7 in) (1999–2004) 1,678 mm (66.1 in) (2004–2005)
Height	1,390 mm (54.7 in) (1999–2004) 1,386 mm (54.6 in) (2004–2005)

Rover 45 1.8 litre saloon 2003

Interior

In the autumn of 1999, the 400 Series was facelifted (under the codename Oyster) and renamed as the Rover 45. From the summer of 2001, a re-engineered hot hatch version of the Rover 45 was sold as the MG ZS.

The 1.4, 1.6 and 1.8-litre petrol and 2.0-litre diesel engines were carried over from the 400 Series, but the 2.0 four-cylinder petrol unit was replaced by a 2.0-litre V6 from the larger Rover 75 – although this power unit was only available on saloon versions. The 45 came equipped with the better seating of the 75 and whilst the 400 models handled very well, the suspension was tuned to give much better controlled ride characteristics with quicker steering.

Post-facelift Rover 45

The 45 was available with Continuously Variable Transmission (CVT) supplied by the German manufacturer ZF Sachs AG which had previously been used in the MGF. This particular design of CVT consists of an oil-cooled laminated steel belt (with external oil cooler) running on variable pulleys. MG Rover had many CVT failures returned to the supplier. Rover's own manual gearbox factory had been retained by BMW during the sale which created MG Rover. After buying its own gearbox designs from BMW for a time MG Rover eventually sourced an alternative supplier and later Rover 25/45 models up to 1.6-litre were fitted with Ford gearboxes.

Post-facelift Rover 45

The revised model boasted improved equipment levels, comfortable interior and reduced prices, compared with the preceding 400 badged models. While the asking price was now in line with other small family cars, the Rover 45 began to lose market share. Being based on the 1992 Honda Domani, the 45 was by now an outdated car compared with contemporary offerings from other marques.

A facelift in the spring of 2004 was MG Rover's last effort to boost sales of the Rover 45, including a new front and rear end, a re-designed dash, revised suspension settings, improved equipment and lower prices, some of these changes were necessitated by the end of Domani production in Japan, as Honda refused to continue the supply of certain parts. Production of the car stopped in April 2005 due to MG Rover's bankruptcy. Honda swiftly terminated the licensing agreement with MG Rover and removed the remaining tooling and assembly lines for the car from Longbridge prior to its sale to Nanjing Automotive.

Security

Rover 45 models were tested on three separate occasions by Thatcham's New Vehicle Security Ratings (NVSR) organisation and achieved the following ratings:^[2]

01/00 - 12/02	Rating
Theft of car:
Theft from car:

01/03 - 03/04	Rating
Theft of car:
Theft from car:

04/04 - 05/05	Rating
Theft of car:
Theft from car:

Powertrains

These were the engines available for the Rover 400 (1995–1999) and Rover 45 (2000–2005):^[3][4]

Replacement model projects

R30

During the late 1990s, replacements for the Rover 25 and 45 models were developed by Rover Group under the codename R30. Intended for launch in 2003 as the Rover 35 and 55, these would have been based on an all-new platform. At launch these would have used K-series engines, but new Valvetronic engines were anticipated to be introduced by 2006. The R30 project was cancelled when BMW divested its ownership of Rover Group in 2000. It is possible that some of the development work may eventually have benefited the BMW 1 Series.^[6]

RD/X60

Following the termination of the R30 project, from 2001, MG Rover planned to replace the 45 with a model range based on the Rover 75 platform. Collectively referred to as the RD/X60 project (sometimes also written RDX60), the range was intended to comprise the following variants:

• RD60: Rover hatchback
• X60: MG hatchback
• RD61: Rover saloon
• RD62: Rover "tourer" estate

A preview of how the RD62 "Tourer" might appear was given at the 2002 Geneva Motor Show in the form of the Rover TCV (Tourer Concept Vehicle) concept car.

During the design process, MG Rover's design partner Tom Walkinshaw Racing (TWR) went into administration. MG Rover lost access to most of the computer-aided design work for their new vehicle. Efforts were made to reclaim these from the administrators however the resulting uncertainty and delays made it impossible to progress with the project.

The abortive 2004 SAIC deal was to have included bringing a replacement for the ageing 45 to market, and the RD/X60 was a likely candidate for this. Ultimately no such joint venture was entered into. After MG Rover's collapse SAIC bought some of the company's intellectual property and released a concept called the Roewe W2. Like the RD/X60 this was partly based on the Rover 75 platform. The W2 entered production in 2008 as the Roewe 550. A hatchback derivative of the 550 was announced in 2009 as the MG6.

References

Media related to Rover 400 and Rover 45 at Wikimedia Commons