Pulse (signal processing)

Examples of pulse shapes: (a) rectangular pulse, (b) cosine squared (raised cosine) pulse, (c) Dirac pulse, (d) sinc pulse, (e) Gaussian pulse

In signal processing, the term pulse has the following meanings:

  1. A rapid, transient change in the amplitude of a signal from a baseline value to a higher or lower value, followed by a rapid return to the baseline value.
  2. A rapid change in some characteristic of a signal, e.g., phase or frequency, from a baseline value to a higher or lower value, followed by a rapid return to the baseline value.[1]

Pulse shapes

Pulse shapes can arise out of a process called pulse-shaping. Optimum pulse shape depends on the application.

Rectangular pulse

These can be found in pulse waves, square waves, boxcar functions, and rectangular functions. In digital signals the up and down transitions between high and low levels are called the rising edge and the falling edge. In digital systems the detection of these sides or action taken in response is termed edge-triggered, rising or falling depending on which side of rectangular pulse. A digital timing diagram is an example of a well-ordered collection of rectangular pulses.

Nyquist pulse

A Nyquist pulse is one which meets the Nyquist ISI criterion and is important in data transmission. An example of a pulse which meets this condition is the sinc function. The sinc pulse is of some significance in signal-processing theory but cannot be produced by a real generator for reasons of causality.

In 2013, Nyquist pulses were produced in an effort to reduce the size of pulses in optical fibers, which enables them to be packed 10x more closely together, yielding a corresponding 10x increase in bandwidth. The pulses were more than 99 percent perfect and were produced using a simple laser and modulator.[2][3]

Gaussian pulse

A Gaussian pulse is shaped as a Gaussian function and is produced by a Gaussian filter. It has the properties of maximum steepness of transition with no overshoot and minimum group delay.

References

  1.  This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).
  2. Joel Detrow. "Pointy pulses improve optical fiber throughput by a factor of 10". Gizmag.com. Retrieved 2013-12-06.
  3. Marcelo A. Soto; Mehdi Alem; Mohammad Amin Shoaie; Armand Vedadi; Camille-Sophie Brès; Luc Thévenaz; Thomas Schneider. "Optical sinc-shaped Nyquist pulses of exceptional quality : Nature Communications : Nature Publishing Group". Nature.com. Retrieved 2013-12-07.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.