Prussian T 37
Prussian T 37 DRG Class 99.40 | |
---|---|
Number(s) | 99 401–408 |
Quantity | 18 |
Manufacturer | |
Year(s) of manufacture | 1904–1912 |
Retired | 1939 |
Wheel arrangement | 0-8-0T |
Axle arrangement | D n2t |
Type | K 44.7 |
Track gauge | 785 mm (2 ft 6 29⁄32 in) |
Length over buffers | 8,520 mm (27 ft 11 1⁄2 in) |
Service weight | 27.9 tonnes (27.5 long tons; 30.8 short tons) |
Adhesive weight | 27.9 t |
Top speed | 25 km/h (16 mph) |
Driving wheel diameter | 810 millimetres (2 ft 7 7⁄8 in) |
Valve gear | Walschaerts (Heusinger) |
No. of cylinders | 2 |
Cylinder bore | 340 mm (13 3⁄8 in) |
Piston stroke | 400 mm (15 3⁄4 in) |
Boiler Overpressure | 13 bar (1.30 MPa; 189 psi) |
Grate area | 1.00 m2 (10.8 sq ft) |
Evaporative heating area | 49.21 m2 (529.7 sq ft) |
Water capacity | 2,500 litres (550 imp gal; 660 US gal) |
Fuel | Coal: 1.3 tonnes (1.28 long tons; 1.43 short tons) |
The Prussian T 37s were German steam locomotives operated by the Prussian state railways. They replaced the smaller 0-6-0T locomotives on the railway line between Beuthen and Kattowitz. In all 18 engines were supplied to Prussia, of which eight were taken over by the Reichsbahn and given numbers 99 401 to 99 408. They were all withdrawn by 1939 and scrapped.
These locomotives were equipped with Klien-Lindner axles at each end. They had an outside frame and the third wheelset was driven. They also had an outside Walschaerts valve gear. The engines could carry 1.3 tonnes of coal and 2.5 m2 of water. The coal tank was located behind the driver's cab.
See also
This article is issued from
Wikipedia.
The text is licensed under Creative Commons - Attribution - Sharealike.
Additional terms may apply for the media files.