Acrylic acid

Acrylic acid[1]
Names
Preferred IUPAC name
Prop-2-enoic acid
Other names
Acrylic acid
Acroleic acid
Ethylenecarboxylic acid
Propene acid
Propenoic acid
Vinylformic acid
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
DrugBank
ECHA InfoCard 100.001.071
EC Number 201-177-9
KEGG
RTECS number AS4375000
UNII
Properties
C3H4O2
Molar mass 72.06 g·mol−1
Appearance clear, colorless liquid
Odor acrid[2]
Density 1.051 g/mL
Melting point 14 °C (57 °F; 287 K)
Boiling point 141 °C (286 °F; 414 K)
Miscible
Vapor pressure 3 mmHg[2]
Acidity (pKa) 4.25[3]
Viscosity 1.3 cP at 20 °C (68 °F)
Hazards
Main hazards Corrosive (C),
Dangerous for the
environment (N)
Safety data sheet MSDS
R-phrases (outdated) R10 R20/21/22 R35 R50
S-phrases (outdated) S26 S36/37/39 S45 S61
NFPA 704
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g., diesel fuel Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g., phosphorus Special hazards (white): no codeNFPA 704 four-colored diamond
2
3
2
Flash point 68 °C (154 °F; 341 K)
429 °C (804 °F; 702 K)
Explosive limits 2.4%-8.02%[2]
US health exposure limits (NIOSH):
PEL (Permissible)
none[2]
REL (Recommended)
TWA 2 ppm (6 mg/m3) [skin][2]
IDLH (Immediate danger)
N.D.[2]
Related compounds
Other anions
acrylate
acetic acid
propionic acid
lactic acid
3-hydroxypropionic acid
malonic acid
butyric acid
crotonic acid
Related compounds
allyl alcohol
propionaldehyde
acrolein
methyl acrylate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Acrylic acid (IUPAC: propenoic acid) is an organic compound with the formula CH2=CHCOOH. It is the simplest unsaturated carboxylic acid, consisting of a vinyl group connected directly to a carboxylic acid terminus. This colorless liquid has a characteristic acrid or tart smell. It is miscible with water, alcohols, ethers, and chloroform. More than a million tons are produced annually.[4]

Production

Acrylic acid is produced from propylene which is a byproduct of ethylene and gasoline production.

CH2=CHCH3 + 32 O2 → CH2=CHCO2H + H2O

Because propane is a significantly cheaper raw material than propylene, considerable research efforts are undertaken to develop a process based on the one-step selective oxidation of propane to acrylic acid.[5][6][7][8] Ethylene can be carboxylated to acrylic acid under supercritical carbon dioxide condition.[9]

Because acrylic acid and its esters have long been valued commercially, many other methods have been developed but most have been abandoned for economic or environmental reasons. An early method was the hydrocarboxylation of acetylene ("Reppe chemistry"):

HCCH + CO + H2O → CH2=CHCO2H

This method requires nickel carbonyl and high pressures of carbon monoxide. It was once manufactured by the hydrolysis of acrylonitrile which is derived from propene by ammoxidation, but was abandoned because the method cogenerates ammonium derivatives. Other now abandoned precursors to acrylic acid include ethenone and ethylene cyanohydrin.[4]

Dow Chemical Company and a partner, OPX Biotechnologies, are investigating using fermented sugar to produce 3-hydroxypropionic acid (3HP), an acrylic acid precursor.[10] The goal is to reduce greenhouse gas emissions. [11]

Reactions and uses

Acrylic acid undergoes the typical reactions of a carboxylic acid. When reacted with an alcohol, it forms the corresponding ester. The esters and salts of acrylic acid are collectively known as acrylates (or propenoates). The most common alkyl esters of acrylic acid are methyl, butyl, ethyl, and 2-ethylhexyl acrylate.

Acrylic acid and its esters readily combine with themselves (to form polyacrylic acid) or other monomers (e.g. acrylamides, acrylonitrile, vinyl compounds, styrene, and butadiene) by reacting at their double bond, forming homopolymers or copolymers which are used in the manufacture of various plastics, coatings, adhesives, elastomers, as well as floor polishes, and paints.

Substituents

As a substituent acrylic acid can be found as an acyl group or a carboxyalkyl group depending on the removal of the group from the molecule. More specifically these are:

  1. The acryloyl group, with the removal of the –OH from carbon-1.
  2. The 2-carboxyethenyl group, with the removal of a –H from carbon-3. This substituent group is found in chlorophyll.

Safety

Acrylic acid is severely irritating and corrosive to the skin and the respiratory tract. Eye contact can result in severe and irreversible injury. Low exposure will cause minimal or no health effects, while high exposure could result in pulmonary edema. The LD50 is 340 mg/kg (rat, oral).

Acrylic acid is a constituent of tobacco smoke.[12]

See also

References

  1. Merck Index, 11th Edition, 124.
  2. 1 2 3 4 5 6 "NIOSH Pocket Guide to Chemical Hazards #0013". National Institute for Occupational Safety and Health (NIOSH).
  3. Dippy, J.F.J.; Hughes, S.R.C.; Rozanski, A. (1959). J. Chem Soc.: 2492.
  4. 1 2 Takashi Ohara, Takahisa Sato, Noboru Shimizu, Günter Prescher Helmut Schwind, Otto Weiberg, Klaus Marten, Helmut Greim "Acrylic Acid and Derivatives" in Ullmann's Encyclopedia of Industrial Chemistry 2003, Wiley-VCH, Weinheim. doi: 10.1002/14356007.a01_161.pub2
  5. Kinetic studies of propane oxidation on Mo and V based mixed oxide catalysts (PDF). 2011.
  6. "The reaction network in propane oxidation over phase-pure MoVTeNb M1 oxide catalysts" (PDF). Journal of Catalysis. 311: 369–385. 2014.
  7. "Multifunctionality of Crystalline MoV(TeNb) M1 Oxide Catalysts in Selective Oxidation of Propane and Benzyl Alcohol". ACS Catalysis. 3 (6): 1103–1113. 2013.
  8. "Surface chemistry of phase-pure M1 MoVTeNb oxide during operation in selective oxidation of propane to acrylic acid" (PDF). Journal of Catalysis. 285: 48–60. 2012.
  9. Sakakura, Toshiyasu; Choi, Jun-Chul; Yasuda, Hiroyuki (13 June 2007). "Transformation of Carbon dioxide". Chemical Reviews. American Chemical Society. 107 (6): 2365–2387. PMID 17564481. doi:10.1021/cr068357u.
  10. Sweet Deal: Dow and Partner Cook up Sugar-to-Acrylic Plan. Durabilityanddesign.com. Retrieved on 2012-05-24.
  11. Better Bugs to Make Plastics, Technology Review, September 20, 2010, retrieved January 9, 2012. Technologyreview.com (2010-09-20). Retrieved on 2012-05-24.
  12. Talhout, Reinskje; Schulz, Thomas; Florek, Ewa; Van Benthem, Jan; Wester, Piet; Opperhuizen, Antoon (2011). "Hazardous Compounds in Tobacco Smoke". International Journal of Environmental Research and Public Health. 8 (12): 613–628. ISSN 1660-4601. PMC 3084482Freely accessible. PMID 21556207. doi:10.3390/ijerph8020613.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.