Point Bridge (Pittsburgh)

Point Bridge

Point Bridge at Fort Pitt Blvd. in 1968
Coordinates 40°26′27″N 80°00′52″W / 40.4408°N 80.0145°W / 40.4408; -80.0145Coordinates: 40°26′27″N 80°00′52″W / 40.4408°N 80.0145°W / 40.4408; -80.0145
Crosses Monongahela River
Locale Pittsburgh, Pennsylvania
Official name South Side Point Bridge
Characteristics
Design cantilever through truss
Material steel
Total length 1,120 feet (340 m)
Width 38 feet (12 m)
Longest span 670 feet (200 m)
Piers in water 2
Clearance below 60 feet (18 m)
History
Opened June 20, 1927
Closed June 21, 1959

The Point Bridge was a steel cantilever truss bridge that spanned the Monongahela River in Pittsburgh, Pennsylvania.[1]

History

The original Point Bridge

Point Bridge I

In 1877, a suspension bridge called the Point Bridge was built over the Monongahela River, and is retroactively referred to as Point Bridge I by locals since being replaced by the second Point Bridge, which is sometimes called "Point Bridge II".[2][3]

Point Bridge II

The bridge was constructed from 1924-1927 and was opened to traffic on 20 June 1927.[4] It was constructed by the Fort Pitt Bridge Works of Canonsburg, Pennsylvania.

It was closer to the point than its Allegheny River counterpart, the Manchester Bridge. Its north end landed roughly where the plaza around the Point State Park fountain begins, and its south end landed less than a tenth of a mile east of the Duquesne Incline. The south landing remains, partly shrouded by trees, between West Station Square Drive and West Carson Street. The bridge passed over an elevated span above the Point to connect the two bridges.

See also

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.