Time

Time
Current time
01:09, 13 August 2017 (UTC)
Major concepts Past Present Future Eternity arguments for
Fields of study Archaeology Chronology History Horology Paleontology Futurology
Philosophy Presentism Eternalism Event Fatalism
Religion Mythology Creation End time Day of Judgement Immortality Afterlife Reincarnation Kalachakra
Measurement Standards Metric Hexadecimal
Science Naturalism Chronobiology Cosmogony Evolution Radiometric dating Ultimate fate of the universe Time in physics
Related topics Motion Space Spacetime Time travel

Classical mechanics
Second law of motion
History Timeline
Branches Applied Celestial Continuum Dynamics Kinematics Kinetics Statics Statistical
Fundamentals Acceleration Angular momentum Couple D'Alembert's principle Energy kinetic potential Force Frame of reference Impulse Inertia / Moment of inertia Mass Mechanical power Mechanical work Moment Momentum Space Speed Time Torque Velocity Virtual work
Formulations Newton's laws of motion Analytical mechanics Lagrangian mechanics Hamiltonian mechanics Routhian mechanics Hamilton–Jacobi equation Appell's equation of motion Udwadia–Kalaba equation Koopman–von Neumann mechanics
Core topics Damping (ratio) Displacement Equations of motion Euler's laws of motion Fictitious force Friction Harmonic oscillator Inertial / Non-inertial reference frame Mechanics of planar particle motion Motion (linear) Newton's law of universal gravitation Newton's laws of motion Relative velocity Rigid body dynamics Euler's equations Simple harmonic motion Vibration
Rotation Circular motion Rotating reference frame Centripetal force Centrifugal force reactive Coriolis force Pendulum Tangential speed Rotational speed Angular acceleration / displacement / frequency / velocity
Scientists Galileo Newton Kepler Horrocks Halley Euler d'Alembert Clairaut Lagrange Laplace Hamilton Poisson Daniel Bernoulli Johann Bernoulli Cauchy

The flow of sand in an hourglass can be used to measure the passage of time. It also concretely represents the present as being between the past and the future.

Time is the indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future.^[1][2][3] Time is a component quantity of various measurements used to sequence events, to compare the duration of events or the intervals between them, and to quantify rates of change of quantities in material reality or in the conscious experience.^[4][5][6][7] Time is often referred to as the fourth dimension, along with the three spatial dimensions.^[8]

Time has long been an important subject of study in religion, philosophy, and science, but defining it in a manner applicable to all fields without circularity has consistently eluded scholars.^{[2][6][7][9][10][11]} Nevertheless, diverse fields such as business, industry, sports, the sciences, and the performing arts all incorporate some notion of time into their respective measuring systems.^[12][13][14]

Two contrasting viewpoints on time divide prominent philosophers. One view is that time is part of the fundamental structure of the universe—a dimension independent of events, in which events occur in sequence. Isaac Newton subscribed to this realist view, and hence it is sometimes referred to as Newtonian time.^[15][16] The opposing view is that time does not refer to any kind of "container" that events and objects "move through", nor to any entity that "flows", but that it is instead part of a fundamental intellectual structure (together with space and number) within which humans sequence and compare events. This second view, in the tradition of Gottfried Leibniz^[17] and Immanuel Kant,^[18][19] holds that time is neither an event nor a thing, and thus is not itself measurable nor can it be travelled.

Time in physics is unambiguously operationally defined as "what a clock reads".^[6][17][20] Time is one of the seven fundamental physical quantities in both the International System of Units and International System of Quantities. Time is used to define other quantities—such as velocity—so defining time in terms of such quantities would result in circularity of definition.^[21] An operational definition of time, wherein one says that observing a certain number of repetitions of one or another standard cyclical event (such as the passage of a free-swinging pendulum) constitutes one standard unit such as the second, is highly useful in the conduct of both advanced experiments and everyday affairs of life. The operational definition leaves aside the question whether there is something called time, apart from the counting activity just mentioned, that flows and that can be measured. Investigations of a single continuum called spacetime bring questions about space into questions about time, questions that have their roots in the works of early students of natural philosophy.

Temporal measurement has occupied scientists and technologists, and was a prime motivation in navigation and astronomy. Periodic events and periodic motion have long served as standards for units of time. Examples include the apparent motion of the sun across the sky, the phases of the moon, the swing of a pendulum, and the beat of a heart. Currently, the international unit of time, the second, is defined by measuring the electronic transition frequency of caesium atoms (see below). Time is also of significant social importance, having economic value ("time is money") as well as personal value, due to an awareness of the limited time in each day and in human life spans.

Temporal measurement and history

Generally speaking, methods of temporal measurement, or chronometry, take two distinct forms: the calendar, a mathematical tool for organising intervals of time,^[22] and the clock, a physical mechanism that counts the passage of time. In day-to-day life, the clock is consulted for periods less than a day whereas the calendar is consulted for periods longer than a day. Increasingly, personal electronic devices display both calendars and clocks simultaneously. The number (as on a clock dial or calendar) that marks the occurrence of a specified event as to hour or date is obtained by counting from a fiducial epoch—a central reference point.

History of the calendar

Artifacts from the Paleolithic suggest that the moon was used to reckon time as early as 6,000 years ago.^[23] Lunar calendars were among the first to appear, either 12 or 13 lunar months (either 354 or 384 days). Without intercalation to add days or months to some years, seasons quickly drift in a calendar based solely on twelve lunar months. Lunisolar calendars have a thirteenth month added to some years to make up for the difference between a full year (now known to be about 365.24 days) and a year of just twelve lunar months. The numbers twelve and thirteen came to feature prominently in many cultures, at least partly due to this relationship of months to years. Other early forms of calendars originated in Mesoamerica, particularly in ancient Mayan civilization. These calendars were religiously and astronomically based, with 18 months in a year and 20 days in a month, plus five epagemonal days at the end of the year.^[24]

The reforms of Julius Caesar in 45 BC put the Roman world on a solar calendar. This Julian calendar was faulty in that its intercalation still allowed the astronomical solstices and equinoxes to advance against it by about 11 minutes per year. Pope Gregory XIII introduced a correction in 1582; the Gregorian calendar was only slowly adopted by different nations over a period of centuries, but it is now the most commonly used calendar around the world, by far.

During the French Revolution, a new clock and calendar were invented in attempt to de-Christianize time and create a more rational system in order to replace the Gregorian calendar. The French Republican Calendar's days consisted of ten hours of a hundred minutes of a hundred seconds, which marked a deviation from the 12-based duodecimal system used in many other devices by many cultures. The system was later abolished in 1806.^[25]

History of time measurement devices

Horizontal sundial in Taganrog

An old kitchen clock

A large variety of devices has been invented to measure time. The study of these devices is called horology.

An Egyptian device that dates to c.1500 BC, similar in shape to a bent T-square, measured the passage of time from the shadow cast by its crossbar on a nonlinear rule. The T was oriented eastward in the mornings. At noon, the device was turned around so that it could cast its shadow in the evening direction.^[26]

A sundial uses a gnomon to cast a shadow on a set of markings calibrated to the hour. The position of the shadow marks the hour in local time. The idea to separate the day into smaller parts is credited to Egyptians because of their sundials, which operated on a duodecimal system. The importance of the number 12 is due the number of lunar cycles in a year and the number of stars used to count the passage of night.^[27]

The most precise timekeeping device of the ancient world was the water clock, or clepsydra, one of which was found in the tomb of Egyptian pharaoh Amenhotep I (1525–1504 BC). They could be used to measure the hours even at night, but required manual upkeep to replenish the flow of water. The Ancient Greeks and the people from Chaldea (southeastern Mesopotamia) regularly maintained timekeeping records as an essential part of their astronomical observations. Arab inventors and engineers in particular made improvements on the use of water clocks up to the Middle Ages.^[28] In the 11th century, Chinese inventors and engineers invented the first mechanical clocks driven by an escapement mechanism.

A contemporary quartz watch, 2007

The hourglass uses the flow of sand to measure the flow of time. They were used in navigation. Ferdinand Magellan used 18 glasses on each ship for his circumnavigation of the globe (1522).^[29] Incense sticks and candles were, and are, commonly used to measure time in temples and churches across the globe. Waterclocks, and later, mechanical clocks, were used to mark the events of the abbeys and monasteries of the Middle Ages. Richard of Wallingford (1292–1336), abbot of St. Alban's abbey, famously built a mechanical clock as an astronomical orrery about 1330.^[30][31] Great advances in accurate time-keeping were made by Galileo Galilei and especially Christiaan Huygens with the invention of pendulum driven clocks along with the invention of the minute hand by Jost Burgi.^[32]

The English word clock probably comes from the Middle Dutch word klocke which, in turn, derives from the medieval Latin word clocca, which ultimately derives from Celtic and is cognate with French, Latin, and German words that mean bell. The passage of the hours at sea were marked by bells, and denoted the time (see ship's bell). The hours were marked by bells in abbeys as well as at sea.

Chip-scale atomic clocks, such as this one unveiled in 2004, are expected to greatly improve GPS location.^[33]

Clocks can range from watches, to more exotic varieties such as the Clock of the Long Now. They can be driven by a variety of means, including gravity, springs, and various forms of electrical power, and regulated by a variety of means such as a pendulum.

Alarm clocks first appeared in ancient Greece around 250 BC with a water clock that would set off a whistle. This idea was later mechanized by Levi Hutchins and Seth E. Thomas.^[32]

A chronometer is a portable timekeeper that meets certain precision standards. Initially, the term was used to refer to the marine chronometer, a timepiece used to determine longitude by means of celestial navigation, a precision firstly achieved by John Harrison. More recently, the term has also been applied to the chronometer watch, a watch that meets precision standards set by the Swiss agency COSC.

The most accurate timekeeping devices are atomic clocks, which are accurate to seconds in many millions of years,^[34] and are used to calibrate other clocks and timekeeping instruments. Atomic clocks use the frequency of electronic transitions in certain atoms to measure the second. One of the most common atoms used is caesium, most modern atomic clocks probe caesium with microwaves to determine the frequency of these electron vibrations.^[35] Since 1967, the International System of Measurements bases its unit of time, the second, on the properties of caesium atoms. SI defines the second as 9,192,631,770 cycles of the radiation that corresponds to the transition between two electron spin energy levels of the ground state of the ¹³³Cs atom.

Today, the Global Positioning System in coordination with the Network Time Protocol can be used to synchronize timekeeping systems across the globe.

In medieval philosophical writings, the atom was a unit of time referred to as the smallest possible division of time. The earliest known occurrence in English is in Byrhtferth's Enchiridion (a science text) of 1010–1012,^[36] where it was defined as 1/564 of a momentum (1½ minutes),^[37] and thus equal to 15/94 of a second. It was used in the computus, the process of calculating the date of Easter.

As of May 2010, the smallest time interval uncertainty in direct measurements is on the order of 12 attoseconds (1.2 × 10⁻¹⁷ seconds), about 3.7 × 10²⁶ Planck times.^[38]

Units of time

The second (s) is the SI base unit. A minute (min) is 60 seconds in length, and an hour is 60 minutes in length. A day is 24 hours or 86400 seconds in length.

Definitions and standards

Originally the second was defined as 1/86,400 of the mean solar day, which is the year-average of the solar day, being the time interval between two successive noons, i.e., the time interval between two successive passages of the sun across the meridian. In 1874 the British Association for the Advancement of Science introduced the CGS (centimetre/gramme/second system) combining fundamental units of length, mass and time. This second is "elastic", because tidal friction is slowing the earth's rotation rate. For use in calculating ephemerides of celestial motion, therefore, in 1952 astronomers introduced the "ephemeris second", currently defined as

the fraction 1/31,556,925.9747 of the tropical year for 1900 January 0 at 12 hours ephemeris time.

^[39]

The CGS system has been superseded by the Système international. The SI base unit for time is the SI second. The International System of Quantities, which incorporates the SI, also defines larger units of time equal to fixed integer multiples of one second (1 s), such as the minute, hour and day. These are not part of the SI, but may be used alongside the SI. Other units of time such as the month and the year are not equal to fixed multiples of 1 s, and instead exhibit significant variations in duration.^[40]

The official SI definition of the second is as follows:^[40][41]

The second is the duration of 9,192,631,770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium 133 atom.

At its 1997 meeting, the CIPM affirmed that this definition refers to a caesium atom in its ground state at a temperature of 0 K.^[40]

The current definition of the second, coupled with the current definition of the metre, is based on the special theory of relativity, which affirms our spacetime to be a Minkowski space. The definition of the second in mean solar time, however, is unchanged.

World time

While in theory, the concept of a single worldwide universal time-scale may have been conceived of many centuries ago, in practicality the technical ability to create and maintain such a time-scale did not become possible until the mid-19th century. The timescale adopted was Greenwich Mean Time, created in 1847. A few countries have replaced it with Coordinated Universal Time, UTC.

History of the development of UTC

With the advent of the industrial revolution, a greater understanding and agreement on the nature of time itself became increasingly necessary and helpful. In 1847 in Britain, Greenwich Mean Time (GMT) was first created for use by the British railways, the British navy, and the British shipping industry. Using telescopes, GMT was calibrated to the mean solar time at the Royal Observatory, Greenwich in the UK.

As international commerce continued to increase throughout Europe, in order to achieve a more efficiently functioning modern society, an agreed upon, and highly accurate international standard of time measurement became necessary. In order to find or determine such a time-standard, three steps had to be followed:

1. An internationally agreed upon time-standard had to be defined.
2. This new time-standard then had to be consistently and accurately measured.
3. The new time-standard then had to be freely shared and distributed around the world.

The development of what is now known as UTC time came about historically as an effort which first began as a collaboration between 41 nations, officially agreed to and signed at the International Meridian Conference, in Washington D.C. in 1884. At this conference, the local mean solar time at the Royal Observatory, Greenwich in England was chosen to define the "universal day", counted from 0 hours at Greenwich mean midnight. This agreed with the civil Greenwich Mean Time used on the island of Great Britain since 1847. In contrast astronomical GMT began at mean noon, i.e. astronomical day X began at noon of civil day X. The purpose of this was to keep one night's observations under one date. The civil system was adopted as of 0 hours (civil) 1 January 1925. Nautical GMT began 24 hours before astronomical GMT, at least until 1805 in the Royal Navy, but persisted much later elsewhere because it was mentioned at the 1884 conference. In 1884, the Greenwich meridian was used for two - thirds of all charts and maps as their Prime Meridian.^[42]

Among the 41 nations represented at the conference, the advanced time-technologies that had already come into use in Britain were fundamental components of the agreed upon method of arriving at a universal and agreed upon international time. In 1928 Greenwich Mean Time was rebranded for scientific purposes by the International Astronomical Union as Universal Time (UT). This was to avoid confusion with the previous system where the day had begun at noon. As the general public had always begun the day at midnight the timescale continued to be presented to them as Greenwich Mean Time. By 1956, universal time had been split into various versions - UT2, which smoothed for polar motion and seasonal effects, was presented to the public as Greenwich Mean Time. Later, UT1 (which smooths only for polar motion) became the default form of UT used by astronomers and hence the form used in navigation, sunrise and sunset and moonrise and moonset tables where the name Greenwich Mean Time continues to be employed. Greenwich Mean Time is also the preferred method of describing the timescale used by legislators. Even to the present day, UT is still based on an international telescopic system. Observations at the Greenwich Observatory itself ceased in 1954, though the location is still used as the basis for the coordinate system. Because the rotational period of Earth is not perfectly constant, the duration of a second would vary if calibrated to a telescope-based standard like GMT, where the second is defined as 1/86 400 of the mean solar day.

For the better part of the first century following the "International Meridian Conference," until 1960, the methods and definitions of time-keeping that had been laid out at the conference proved to be adequate to meet time tracking needs of science. Still, with the advent of the "electronic revolution" in the latter half of the 20th century, the technologies that had been available at the time of the Convention of the Metre proved to be in need of further refinement in order to meet the needs of the ever-increasing precision that the "electronic revolution" had begun to require.

The ephemeris second

An invariable second (the "ephemeris second") had been defined, use of which removed the errors in ephemerides resulting from the use of the variable mean solar second as the time argument. In 1960 this ephemeris second was made the basis of the "coordinated universal time" which was being derived from atomic clocks. It is a specified fraction of the mean tropical year as at 1900 and, being based on historical telescope observations, corresponds roughly to the mean solar second of the early nineteenth century.^[43]

The SI second

In 1967 a further step was taken with the introduction of the SI second, essentially the ephemeris second as measured by atomic clocks and formally defined in atomic terms.^[44] The SI second (Standard Internationale second) is based directly on the measurement of the atomic-clock observation of the frequency oscillation of caesium atoms. It is the basis of all atomic timescales, e.g. coordinated universal time, GPS time, International Atomic Time, etc. Atomic clocks do not measure nuclear decay rates, which is a common misconception, but rather measure a certain natural vibrational frequency of caesium-133.^[45] Coordinated universal time is subject to one constraint which does not affect the other atomic timescales. As it has been adopted as the civil timescale by some countries (most countries have opted to retain mean solar time) it is not permitted to deviate from GMT by more than 0.9 second. This is achieved by the occasional insertion of a leap second.

Current application of UTC

Most countries use mean solar time. Australia, Canada (Quebec only), Colombia, France, Germany, New Zealand, Papua New Guinea (Bougainville only), Paraguay, Portugal, Switzerland, the United States and Venezuela use UTC. However, UTC is widely used by the scientific community in countries where mean solar time is official. UTC time is based on the SI second, which was first defined in 1967, and is based on the use of atomic clocks. Some other less used but closely related time-standards include International Atomic Time (TAI), Terrestrial Time, and Barycentric Dynamical Time.

Between 1967 and 1971, UTC was periodically adjusted by fractional amounts of a second in order to adjust and refine for variations in mean solar time, with which it is aligned. After 1 January 1972, UTC time has been defined as being offset from atomic time by a whole number of seconds, changing only when a leap second is added to keep radio - controlled clocks synchronized with the rotation of the Earth.

The Global Positioning System also broadcasts a very precise time signal worldwide, along with instructions for converting GPS time to UTC. GPS-time is based on, and regularly synchronized with or from, UTC-time.

Earth is split up into a number of time zones. Most time zones are exactly one hour apart, and by convention compute their local time as an offset from GMT. For example, time zones at sea are based on GMT. In many locations (but not at sea) these offsets vary twice yearly due to daylight saving time transitions.

Time conversions

These conversions are accurate at the millisecond level for time systems involving earth rotation (UT1 & TT). Conversions between atomic time systems (TAI, GPS, and UTC) are accurate at the microsecond level.

Definitions:

1. LS = TAI - UTC = Leap Seconds from http://maia.usno.navy.mil/ser7/tai-utc.dat
2. DUT1 = UT1 - UTC from http://maia.usno.navy.mil/ser7/ser7.dat or http://maia.usno.navy.mil/search/search.html

Sidereal time

Sidereal time is the measurement of time relative to a distant star (instead of solar time that is relative to the sun). It is used in astronomy to predict when a star will be overhead. Due to the orbit of the earth around the sun a sidereal day is about 4 minutes (1/366th) less than a solar day.

Chronology

Another form of time measurement consists of studying the past. Events in the past can be ordered in a sequence (creating a chronology), and can be put into chronological groups (periodization). One of the most important systems of periodization is the geologic time scale, which is a system of periodizing the events that shaped the Earth and its life. Chronology, periodization, and interpretation of the past are together known as the study of history.

Time-like concepts: terminology

The term "time" is generally used for many close but different concepts, including:

• instant^[46] as an object—one point on the time axes. Being an object, it has no value;
• time interval^[47] as an object—part of the time axes limited by two instants. Being an object, it has no value;
• date^[48] as a quantity characterising an instant. As a quantity, it has a value which may be expressed in a variety of ways, for example "2014-04-26T09:42:36,75" in ISO standard format, or more colloquially such as "today, 9:42 a.m.";
• duration^[49] as a quantity characterizing a time interval.^[50] As a quantity, it has a value, such as a number of minutes, or may be described in terms of the quantities (such as times and dates) of its beginning and end.

Religion

Hindu units of time shown logarithmically

Linear and cyclical time

Ancient cultures such as Incan, Mayan, Hopi, and other Native American Tribes - plus the Babylonians, Ancient Greeks, Hinduism, Buddhism, Jainism, and others - have a concept of a wheel of time: they regard time as cyclical and quantic, consisting of repeating ages that happen to every being of the Universe between birth and extinction.

In general, the Islamic and Judeo-Christian world-view regards time as linear^[51] and directional,^[52] beginning with the act of creation by God. The traditional Christian view sees time ending, teleologically,^[53] with the eschatological end of the present order of things, the "end time".

In the Old Testament book Ecclesiastes, traditionally ascribed to Solomon (970–928 BC), time (as the Hebrew word עידן, זמן `iddan(age, as in "Ice age") zĕman(time) is often translated) was traditionally regarded as a medium for the passage of predestined events. (Another word, زمان" זמן" zamān, meant time fit for an event, and is used as the modern Arabic, Persian, and Hebrew equivalent to the English word "time".)

Time in Greek mythology

The Greek language denotes two distinct principles, Chronos and Kairos. The former refers to numeric, or chronological, time. The latter, literally "the right or opportune moment", relates specifically to metaphysical or Divine time. In theology, Kairos is qualitative, as opposed to quantitative.

In Greek mythology, Chronos (Ancient Greek: Χρόνος) is identified as the Personification of Time. His name in Greek means "time" and is alternatively spelled Chronus (Latin spelling) or Khronos. Chronos is usually portrayed as an old, wise man with a long, gray beard, such as "Father Time". Some English words whose etymological root is khronos/chronos include chronology, chronometer, chronic, anachronism, synchronise, and chronicle.

Time in Kabbalah

According to Kabbalists, "time" is a paradox^[54] and an illusion.^[55] Both the future and the past are recognised to be combined and simultaneously present.

Philosophy

Two distinct viewpoints on time divide many prominent philosophers. One view is that time is part of the fundamental structure of the universe, a dimension in which events occur in sequence. Sir Isaac Newton subscribed to this realist view, and hence it is sometimes referred to as Newtonian time.^[16] An opposing view is that time does not refer to any kind of actually existing dimension that events and objects "move through", nor to any entity that "flows", but that it is instead an intellectual concept (together with space and number) that enables humans to sequence and compare events.^[56] This second view, in the tradition of Gottfried Leibniz^[17] and Immanuel Kant,^[18][19] holds that space and time "do not exist in and of themselves, but ... are the product of the way we represent things", because we can know objects only as they appear to us.

Furthermore, it may be that there is a subjective component to time, but whether or not time itself is "felt", as a sensation, or is a judgment, is a matter of debate.^{[2][6][7][57][58]}

The Vedas, the earliest texts on Indian philosophy and Hindu philosophy dating back to the late 2nd millennium BC, describe ancient Hindu cosmology, in which the universe goes through repeated cycles of creation, destruction and rebirth, with each cycle lasting 4,320 million years.^[59] Ancient Greek philosophers, including Parmenides and Heraclitus, wrote essays on the nature of time.^[60] Plato, in the Timaeus, identified time with the period of motion of the heavenly bodies. Aristotle, in Book IV of his Physica defined time as 'number of movement in respect of the before and after'.^[61]

In Book 11 of his Confessions, St. Augustine of Hippo ruminates on the nature of time, asking, "What then is time? If no one asks me, I know: if I wish to explain it to one that asketh, I know not." He begins to define time by what it is not rather than what it is,^[62] an approach similar to that taken in other negative definitions. However, Augustine ends up calling time a "distention" of the mind (Confessions 11.26) by which we simultaneously grasp the past in memory, the present by attention, and the future by expectation.

In contrast to ancient Greek philosophers who believed that the universe had an infinite past with no beginning, medieval philosophers and theologians developed the concept of the universe having a finite past with a beginning. This view is shared by Abrahamic faiths as they believe time started by creation, therefore the only thing being infinite is God and everything else, including time, is finite.

Isaac Newton believed in absolute space and absolute time; Leibniz believed that time and space are relational.^[63] The differences between Leibniz's and Newton's interpretations came to a head in the famous Leibniz–Clarke correspondence.

Immanuel Kant, in the Critique of Pure Reason, described time as an a priori intuition that allows us (together with the other a priori intuition, space) to comprehend sense experience.^[64] With Kant, neither space nor time are conceived as substances, but rather both are elements of a systematic mental framework that necessarily structures the experiences of any rational agent, or observing subject. Kant thought of time as a fundamental part of an abstract conceptual framework, together with space and number, within which we sequence events, quantify their duration, and compare the motions of objects. In this view, time does not refer to any kind of entity that "flows," that objects "move through," or that is a "container" for events. Spatial measurements are used to quantify the extent of and distances between objects, and temporal measurements are used to quantify the durations of and between events. Time was designated by Kant as the purest possible schema of a pure concept or category.

Henri Bergson believed that time was neither a real homogeneous medium nor a mental construct, but possesses what he referred to as Duration. Duration, in Bergson's view, was creativity and memory as an essential component of reality.^[65]

According to Martin Heidegger we do not exist inside time, we are time. Hence, the relationship to the past is a present awareness of having been, which allows the past to exist in the present. The relationship to the future is the state of anticipating a potential possibility, task, or engagement. It is related to the human propensity for caring and being concerned, which causes "being ahead of oneself" when thinking of a pending occurrence. Therefore, this concern for a potential occurrence also allows the future to exist in the present. The present becomes an experience, which is qualitative instead of quantitative. Heidegger seems to think this is the way that a linear relationship with time, or temporal existence, is broken or transcended.^[66] We are not stuck in sequential time. We are able to remember the past and project into the future—we have a kind of random access to our representation of temporal existence; we can, in our thoughts, step out of (ecstasis) sequential time.^[67]

Time as "unreal"

In 5th century BC Greece, Antiphon the Sophist, in a fragment preserved from his chief work On Truth, held that: "Time is not a reality (hypostasis), but a concept (noêma) or a measure (metron)." Parmenides went further, maintaining that time, motion, and change were illusions, leading to the paradoxes of his follower Zeno.^[68] Time as an illusion is also a common theme in Buddhist thought.^[69][70]

J. M. E. McTaggart's 1908 The Unreality of Time argues that, since every event has the characteristic of being both present and not present (i.e., future or past), that time is a self-contradictory idea (see also The flow of time).

These arguments often center on what it means for something to be unreal. Modern physicists generally believe that time is as real as space—though others, such as Julian Barbour in his book The End of Time, argue that quantum equations of the universe take their true form when expressed in the timeless realm containing every possible now or momentary configuration of the universe, called 'platonia' by Barbour.^[71]

A modern philosophical theory called presentism views the past and the future as human-mind interpretations of movement instead of real parts of time (or "dimensions") which coexist with the present. This theory rejects the existence of all direct interaction with the past or the future, holding only the present as tangible. This is one of the philosophical arguments against time travel. This contrasts with eternalism (all time: present, past and future, is real) and the growing block theory (the present and the past are real, but the future is not).

Physical definition

Classical mechanics
Second law of motion
History Timeline
Branches Applied Celestial Continuum Dynamics Kinematics Kinetics Statics Statistical
Fundamentals Acceleration Angular momentum Couple D'Alembert's principle Energy kinetic potential Force Frame of reference Impulse Inertia / Moment of inertia Mass Mechanical power Mechanical work Moment Momentum Space Speed Time Torque Velocity Virtual work
Formulations Newton's laws of motion Analytical mechanics Lagrangian mechanics Hamiltonian mechanics Routhian mechanics Hamilton–Jacobi equation Appell's equation of motion Udwadia–Kalaba equation Koopman–von Neumann mechanics
Core topics Damping (ratio) Displacement Equations of motion Euler's laws of motion Fictitious force Friction Harmonic oscillator Inertial / Non-inertial reference frame Mechanics of planar particle motion Motion (linear) Newton's law of universal gravitation Newton's laws of motion Relative velocity Rigid body dynamics Euler's equations Simple harmonic motion Vibration
Rotation Circular motion Rotating reference frame Centripetal force Centrifugal force reactive Coriolis force Pendulum Tangential speed Rotational speed Angular acceleration / displacement / frequency / velocity
Scientists Galileo Newton Kepler Horrocks Halley Euler d'Alembert Clairaut Lagrange Laplace Hamilton Poisson Daniel Bernoulli Johann Bernoulli Cauchy

Until Einstein's reinterpretation of the physical concepts associated with time and space, time was considered to be the same everywhere in the universe, with all observers measuring the same time interval for any event.^[72] Non-relativistic classical mechanics is based on this Newtonian idea of time.

Einstein, in his special theory of relativity,^[73] postulated the constancy and finiteness of the speed of light for all observers. He showed that this postulate, together with a reasonable definition for what it means for two events to be simultaneous, requires that distances appear compressed and time intervals appear lengthened for events associated with objects in motion relative to an inertial observer.

The theory of special relativity finds a convenient formulation in Minkowski spacetime, a mathematical structure that combines three dimensions of space with a single dimension of time. In this formalism, distances in space can be measured by how long light takes to travel that distance, e.g., a light-year is a measure of distance, and a meter is now defined in terms of how far light travels in a certain amount of time. Two events in Minkowski spacetime are separated by an invariant interval, which can be either space-like, light-like, or time-like. Events that have a time-like separation cannot be simultaneous in any frame of reference, there must be a temporal component (and possibly a spatial one) to their separation. Events that have a space-like separation will be simultaneous in some frame of reference, and there is no frame of reference in which they do not have a spatial separation. Different observers may calculate different distances and different time intervals between two events, but the invariant interval between the events is independent of the observer (and his velocity).

Classical mechanics

In non-relativistic classical mechanics, Newton's concept of "relative, apparent, and common time" can be used in the formulation of a prescription for the synchronization of clocks. Events seen by two different observers in motion relative to each other produce a mathematical concept of time that works sufficiently well for describing the everyday phenomena of most people's experience. In the late nineteenth century, physicists encountered problems with the classical understanding of time, in connection with the behavior of electricity and magnetism. Einstein resolved these problems by invoking a method of synchronizing clocks using the constant, finite speed of light as the maximum signal velocity. This led directly to the result that observers in motion relative to one another measure different elapsed times for the same event.

Two-dimensional space depicted in three-dimensional spacetime. The past and future light cones are absolute, the "present" is a relative concept different for observers in relative motion.

Spacetime

Time has historically been closely related with space, the two together merging into spacetime in Einstein's special relativity and general relativity. According to these theories, the concept of time depends on the spatial reference frame of the observer, and the human perception as well as the measurement by instruments such as clocks are different for observers in relative motion. For example, if a spaceship carrying a clock flies through space at (very nearly) the speed of light, its crew does not notice a change in the speed of time on board their vessel because everything traveling at the same speed slows down at the same rate (including the clock, the crew's thought processes, and the functions of their bodies). However, to a stationary observer watching the spaceship fly by, the spaceship appears flattened in the direction it is traveling and the clock on board the spaceship appears to move very slowly.

On the other hand, the crew on board the spaceship also perceives the observer as slowed down and flattened along the spaceship's direction of travel, because both are moving at very nearly the speed of light relative to each other. Because the outside universe appears flattened to the spaceship, the crew perceives themselves as quickly traveling between regions of space that (to the stationary observer) are many light years apart. This is reconciled by the fact that the crew's perception of time is different from the stationary observer's; what seems like seconds to the crew might be hundreds of years to the stationary observer. In either case, however, causality remains unchanged: the past is the set of events that can send light signals to an entity and the future is the set of events to which an entity can send light signals.^[74][75][76]

Time dilation

Relativity of simultaneity: Event B is simultaneous with A in the green reference frame, but it occurred before in the blue frame, and occurs later in the red frame.

Einstein showed in his thought experiments that people travelling at different speeds, while agreeing on cause and effect, measure different time separations between events, and can even observe different chronological orderings between non-causally related events. Though these effects are typically minute in the human experience, the effect becomes much more pronounced for objects moving at speeds approaching the speed of light. Many subatomic particles exist for only a fixed fraction of a second in a lab relatively at rest, but some that travel close to the speed of light can be measured to travel farther and survive much longer than expected (a muon is one example). According to the special theory of relativity, in the high-speed particle's frame of reference, it exists, on the average, for a standard amount of time known as its mean lifetime, and the distance it travels in that time is zero, because its velocity is zero. Relative to a frame of reference at rest, time seems to "slow down" for the particle. Relative to the high-speed particle, distances seem to shorten. Einstein showed how both temporal and spatial dimensions can be altered (or "warped") by high-speed motion.

Einstein (The Meaning of Relativity): "Two events taking place at the points A and B of a system K are simultaneous if they appear at the same instant when observed from the middle point, M, of the interval AB. Time is then defined as the ensemble of the indications of similar clocks, at rest relative to K, which register the same simultaneously."

Einstein wrote in his book, Relativity, that simultaneity is also relative, i.e., two events that appear simultaneous to an observer in a particular inertial reference frame need not be judged as simultaneous by a second observer in a different inertial frame of reference.

Relativistic time versus Newtonian time

The animations visualise the different treatments of time in the Newtonian and the relativistic descriptions. At the heart of these differences are the Galilean and Lorentz transformations applicable in the Newtonian and relativistic theories, respectively.

In the figures, the vertical direction indicates time. The horizontal direction indicates distance (only one spatial dimension is taken into account), and the thick dashed curve is the spacetime trajectory ("world line") of the observer. The small dots indicate specific (past and future) events in spacetime.

The slope of the world line (deviation from being vertical) gives the relative velocity to the observer. Note how in both pictures the view of spacetime changes when the observer accelerates.

In the Newtonian description these changes are such that time is absolute:^[77] the movements of the observer do not influence whether an event occurs in the 'now' (i.e., whether an event passes the horizontal line through the observer).

However, in the relativistic description the observability of events is absolute: the movements of the observer do not influence whether an event passes the "light cone" of the observer. Notice that with the change from a Newtonian to a relativistic description, the concept of absolute time is no longer applicable: events move up-and-down in the figure depending on the acceleration of the observer.

Arrow of time

Time appears to have a direction—the past lies behind, fixed and immutable, while the future lies ahead and is not necessarily fixed. Yet for the most part the laws of physics do not specify an arrow of time, and allow any process to proceed both forward and in reverse. This is generally a consequence of time being modelled by a parameter in the system being analysed, where there is no "proper time": the direction of the arrow of time is sometimes arbitrary. Examples of this include the cosmological arrow of time, which points away from the Big Bang, CPT symmetry, and the radiative arrow of time, caused by light only travelling forwards in time (see light cone). In particle physics, the violation of CP symmetry implies that there should be a small counterbalancing time asymmetry to preserve CPT symmetry as stated above. The standard description of measurement in quantum mechanics is also time asymmetric (see Measurement in quantum mechanics). The second law of thermodynamics states that entropy must increase over time (see Entropy). This can be in either direction - Brian Greene theorizes that, according to the equations, the change in entropy occurs symmetrically whether going forward or backward in time. So entropy tends to increase in either direction, and our current low-entropy universe is a statistical aberration, in the similar manner as tossing a coin often enough that eventually heads will result ten times in a row. However, this theory is not supported empirically in local experiment.^[78]

Quantized time

Time quantization is a hypothetical concept. In the modern established physical theories (the Standard Model of Particles and Interactions and General Relativity) time is not quantized.

Planck time (~ 5.4 × 10⁻⁴⁴ seconds) is the unit of time in the system of natural units known as Planck units. Current established physical theories are believed to fail at this time scale, and many physicists expect that the Planck time might be the smallest unit of time that could ever be measured, even in principle. Tentative physical theories that describe this time scale exist; see for instance loop quantum gravity.

Time travel

Time travel is the concept of moving backwards or forwards to different points in time, in a manner analogous to moving through space, and different from the normal "flow" of time to an earthbound observer. In this view, all points in time (including future times) "persist" in some way. Time travel has been a plot device in fiction since the 19th century. Travelling backwards in time has never been verified, presents many theoretical problems, and may be an impossibility.^[79] Any technological device, whether fictional or hypothetical, that is used to achieve time travel is known as a time machine.

A central problem with time travel to the past is the violation of causality; should an effect precede its cause, it would give rise to the possibility of a temporal paradox. Some interpretations of time travel resolve this by accepting the possibility of travel between branch points, parallel realities, or universes.

Another solution to the problem of causality-based temporal paradoxes is that such paradoxes cannot arise simply because they have not arisen. As illustrated in numerous works of fiction, free will either ceases to exist in the past or the outcomes of such decisions are predetermined. As such, it would not be possible to enact the grandfather paradox because it is a historical fact that your grandfather was not killed before his child (your parent) was conceived. This view doesn't simply hold that history is an unchangeable constant, but that any change made by a hypothetical future time traveller would already have happened in his or her past, resulting in the reality that the traveller moves from. More elaboration on this view can be found in the Novikov self-consistency principle.

Time perception

Philosopher and psychologist William James

The specious present refers to the time duration wherein one's perceptions are considered to be in the present. The experienced present is said to be ‘specious’ in that, unlike the objective present, it is an interval and not a durationless instant. The term specious present was first introduced by the psychologist E.R. Clay, and later developed by William James.^[80]

Biopsychology

The brain's judgment of time is known to be a highly distributed system, including at least the cerebral cortex, cerebellum and basal ganglia as its components. One particular component, the suprachiasmatic nuclei, is responsible for the circadian (or daily) rhythm, while other cell clusters appear capable of shorter-range (ultradian) timekeeping.

Psychoactive drugs can impair the judgment of time. Stimulants can lead both humans and rats to overestimate time intervals,^[81][82] while depressants can have the opposite effect.^[83] The level of activity in the brain of neurotransmitters such as dopamine and norepinephrine may be the reason for this.^[84] Such chemicals will either excite or inhibit the firing of neurons in the brain, with a greater firing rate allowing the brain to register the occurrence of more events within a given interval (speed up time) and a decreased firing rate reducing the brain's capacity to distinguish events occurring within a given interval (slow down time).^[85]

Mental chronometry is the use of response time in perceptual-motor tasks to infer the content, duration, and temporal sequencing of cognitive operations.

Development of awareness and understanding of time in children

Children's expanding cognitive abilities allow them to understand time more clearly. Two- and three-year-olds' understanding of time is mainly limited to "now and not now." Five- and six-year-olds can grasp the ideas of past, present, and future. Seven- to ten-year-olds can use clocks and calendars.^[86]

Alterations

In addition to psychoactive drugs, judgments of time can be altered by temporal illusions (like the kappa effect),^[87] age,^[88] and hypnosis.^[89] The sense of time is impaired in some people with neurological diseases such as Parkinson's disease and attention deficit disorder.

Psychologists assert that time seems to go faster with age, but the literature on this age-related perception of time remains controversial.^[90] Those who support this notion argue that young people, having more excitatory neurotransmitters, are able to cope with faster external events.^[85]

Use of time

In sociology and anthropology, time discipline is the general name given to social and economic rules, conventions, customs, and expectations governing the measurement of time, the social currency and awareness of time measurements, and people's expectations concerning the observance of these customs by others. Arlie Russell Hochschild^[91][92] and Norbert Elias^[93] have written on the use of time from a sociological perspective.

The use of time is an important issue in understanding human behavior, education, and travel behavior. Time-use research is a developing field of study. The question concerns how time is allocated across a number of activities (such as time spent at home, at work, shopping, etc.). Time use changes with technology, as the television or the Internet created new opportunities to use time in different ways. However, some aspects of time use are relatively stable over long periods of time, such as the amount of time spent traveling to work, which despite major changes in transport, has been observed to be about 20–30 minutes one-way for a large number of cities over a long period.

Time management is the organization of tasks or events by first estimating how much time a task requires and when it must be completed, and adjusting events that would interfere with its completion so it is done in the appropriate amount of time. Calendars and day planners are common examples of time management tools.

A sequence of events, or series of events, is a sequence of items, facts, events, actions, changes, or procedural steps, arranged in time order (chronological order), often with causality relationships among the items.^[94][95][96] Because of causality, cause precedes effect, or cause and effect may appear together in a single item, but effect never precedes cause. A sequence of events can be presented in text, tables, charts, or timelines. The description of the items or events may include a timestamp. A sequence of events that includes the time along with place or location information to describe a sequential path may be referred to as a world line.

Uses of a sequence of events include stories,^[97] historical events (chronology), directions and steps in procedures,^[98] and timetables for scheduling activities. A sequence of events may also be used to help describe processes in science, technology, and medicine. A sequence of events may be focused on past events (e.g., stories, history, chronology), on future events that must be in a predetermined order (e.g., plans, schedules, procedures, timetables), or focused on the observation of past events with the expectation that the events will occur in the future (e.g., processes, projections). The use of a sequence of events occurs in fields as diverse as machines (cam timer), documentaries (Seconds From Disaster), law (choice of law), computer simulation (discrete event simulation), and electric power transmission^[99] (sequence of events recorder). A specific example of a sequence of events is the timeline of the Fukushima Daiichi nuclear disaster.

Spatial conceptualization of time

Although time is regarded as an abstract concept, there is increasing evidence that time is conceptualized in the mind in terms of space.^[100] That is, instead of thinking about time in a general, abstract way, humans think about time in a spatial way and mentally organize it as such. Using space to think about time allows humans to mentally organize temporal events in a specific way.

This spatial representation of time is often represented in the mind as a Mental Time Line (MTL).^[101] Using space to think about time allows humans to mentally organize temporal order. These origins are shaped by many environmental factors^[100]––for example, literacy appears to play a large role in the different types of MTLs, as reading/writing direction provides an everyday temporal orientation that differs from culture to culture.^[101] In western cultures, the MTL may unfold rightward (with the past on the left and the future on the right) since people read and write from left to right.^[101] Western calendars also continue this trend by placing the past on the left with the future progressing toward the right. Conversely, Arabic, Farsi, Urdu and Israeli-Hebrew speakers read from right to left, and their MTLs unfold leftward (past on the right with future on the left), and evidence suggests these speakers organize time events in their minds like this as well.^[101]

This linguistic evidence that abstract concepts are based in spatial concepts also reveals that the way humans mentally organize time events varies across cultures––that is, a certain specific mental organization system is not universal. So, although Western cultures typically associate past events with the left and future events with the right according to a certain MTL, this kind of horizontal, egocentric MTL is not the spatial organization of all cultures. Although most developed nations use an egocentric spatial system, there is recent evidence that some cultures use an allocentric spatialization, often based on environmental features.^[100]

A recent study of the indigenous Yupno people of Papua New Guinea focused on the directional gestures used when individuals used time-related words.^[100] When speaking of the past (such as "last year" or "past times"), individuals gestured downhill, where the river of the valley flowed into the ocean. When speaking of the future, they gestured uphill, toward the source of the river. This was common regardless of which direction the person faced, revealing that the Yupno people may use an allocentric MTL, in which time flows uphill.^[100]

A similar study of the Pormpuraawans, an aboriginal group in Australia, revealed a similar distinction in which when asked to organize photos of a man aging "in order," individuals consistently placed the youngest photos to the east and the oldest photos to the west, regardless of which direction they faced.^[102] This directly clashed with an American group which consistently organized the photos from left to right. Therefore, this group also appears to have an allocentric MTL, but based on the cardinal directions instead of geographical features.^[102]

The wide array of distinctions in the way different groups think about time leads to the broader question that different groups may also think about other abstract concepts in different ways as well, such as causality and number.^[100]

See also

Time's mortal aspect is personified in this bronze statue by Charles van der Stappen

• Era
• Horology
• International System of Quantities
• Kairos
• List of UTC timing centers
• UTC
• Term (time)

Books

• A Brief History of Time by Stephen Hawking
• About Time: Einstein's Unfinished Revolution by Paul Davies
• From Eternity to Here: The Quest for the Ultimate Theory of Time by Sean M. Carroll
• The Discovery of Time by Stephen Toulmin and June Goodfield
• A Natural History of Time by Pascal Richet
• The Physical Basis of The Direction of Time by Heinz-Dieter Zeh
• An Experiment with Time by John William Dunne
• Einstein's Dreams by Alan Lightman
• Being and Time by Martin Heidegger
• Time Reborn by Lee Smolin

Organizations

Leading scholarly organisations for researchers on the history and technology of time and timekeeping

• Antiquarian Horological Society—AHS (United Kingdom)
• Chronometrophilia (Switzerland)
• Deutsche Gesellschaft für Chronometrie—DGC (Germany)
• National Association of Watch and Clock Collectors—NAWCC (United States)

References

Further reading

External links

• Accurate time vs. PC Clock Difference
• Exploring Time from Planck Time to the lifespan of the universe
• Different systems of measuring time
• Time on In Our Time at the BBC.
• Time in the Internet Encyclopedia of Philosophy, by Bradley Dowden.
• Le Poidevin, Robin (Winter 2004). "The Experience and Perception of Time". In Edward N. Zalta. The Stanford Encyclopedia of Philosophy. Retrieved 9 April 2011. 
• Time at Open Directory

Time
Key concepts	Human Life Nature Past history deep time Present Future Futures studies Far future in religion Far future in science fiction and popular culture Timeline of the far future Eternity Eternity of the world
Measurement and standards	Chronometry UTC UT TAI Unit of time Planck time Second Minute Hour Day Week Month Year Decade Century Millennium Tropical year Sidereal year Samvatsara Measurement systems Time zone Six-hour clock 12-hour clock 24-hour clock Daylight saving time Solar time Sidereal time Metric time Decimal time Hexadecimal time Calendars Gregorian Julian Hebrew Islamic Lunar Solar Hijri Mayan Intercalation Leap second Leap year
Clocks	Horology History of timekeeping devices Main types astrarium atomic quantum marine sundial sundial markup schema watch water-based
Chronology History	Astronomical chronology Big History Calendar era Chronicle Deep time Periodization Regnal year Timeline
Religion Mythology	Dreamtime Kāla Kalachakra Prophecy Time and fate deities Wheel of time Immortality
Philosophy of time	A-series and B-series B-theory of time Causality Duration Endurantism Eternal return Eternalism Event Perdurantism Presentism Temporal finitism Temporal parts The Unreality of Time
Human experience and use of time	Accounting period Chronemics Fiscal year Generation time Mental chronometry Music Procrastination Punctuality Temporal database Term Time discipline Time management Time perception Specious present Time-tracking software Time-use research Time-based currency (time banking) Time value of money Time clock Timesheet Yesterday – Today – Tomorrow
Time in	Geology Geological time age chron eon epoch era period Geochronology Geological history of Earth Physics Absolute time and space Arrow of time Chronon Coordinate time Imaginary time Planck epoch Planck time Proper time Rate Spacetime Theory of relativity Time dilation gravitational Time domain Time translation symmetry Time reversal symmetry other subject areas Chronological dating Chronobiology Circadian rhythms Dating methodologies in archaeology Time geography
Related topics	Carpe diem Clock position Space System time Tempus fugit Time capsule Time complexity Time signature Time travel
Time portal

Time articles: Detailed navigation

Time measurement and standards Chronometry Orders of magnitude Metrology International standards Coordinated Universal Time offset UT ΔT DUT1 International Earth Rotation and Reference Systems Service ISO 31-1 ISO 8601 International Atomic Time 6-hour clock 12-hour clock 24-hour clock Barycentric Coordinate Time Barycentric Dynamical Time Civil time Daylight saving time Geocentric Coordinate Time International Date Line Leap second Solar time Terrestrial Time Time zone 180th meridian Obsolete standards Ephemeris time Greenwich Mean Time Prime meridian Time in physics Absolute time and space Spacetime Chronon Continuous signal Coordinate time Cosmological decade Discrete time and continuous time Planck time Proper time Theory of relativity Time dilation Gravitational time dilation Time domain Time translation symmetry T-symmetry Horology Clock Astrarium Atomic clock Complication History of timekeeping devices Hourglass Marine chronometer Marine sandglass Radio clock Watch Water clock Sundial Dialing scales Equation of time History of sundials Sundial markup schema Calendar Astronomical Dominical letter Epact Equinox Gregorian Hebrew Hindu Intercalation Islamic Julian Leap year Lunar Lunisolar Solar Solstice Tropical year Weekday determination Weekday names Archaeology and geology Chronological dating Geologic time scale International Commission on Stratigraphy Astronomical chronology Galactic year Nuclear timescale Precession Sidereal time Units of time Century Day Decade Fortnight Hour Jiffy Lustrum Millennium Minute Moment Month Paksha Saeculum Second Shake Week Year Related topics Chronology Duration music Mental chronometry Metric time System time Time value of money Timekeeper Chronology Key topics Archaeology Astronomy Geology History Human Life Nature Paleontology Time Eras Epochs Calendar eras Human Era Ab urbe condita Anno Domini / Common Era Anno Mundi Byzantine era Seleucid era Spanish era Before Present Hijri Egyptian Sothic cycle Hindu units of time (Yuga) Mesoamerican Long Count Short Count Tzolk'in Haab' Regnal year Canon of Kings Lists of kings Limmu Era names Chinese Japanese Korean Vietnamese Calendars Pre-Julian / Julian Pre-Julian Roman Original Julian Proleptic Julian Revised Julian Gregorian Gregorian Proleptic Gregorian Old Style and New Style dates Adoption of the Gregorian calendar Dual dating Astronomical Lunisolar Solar Lunar Astronomical year numbering Others Chinese sexagenary cycle Geologic Calendar Hebrew Iranian Islamic ISO week date Mesoamerican Maya Aztec Winter count (Plains Indians) Astronomic time Cosmic Calendar Ephemeris Galactic year Metonic cycle Milankovitch cycles Geologic time Concepts Deep time Geological history of Earth Geological time units Standards Global Standard Stratigraphic Age (GSSA) Global Boundary Stratotype Section and Point (GSSP) Methods Chronostratigraphy Geochronology Isotope geochemistry Law of superposition Luminescence dating Samarium-neodymium dating Chronological dating Absolute dating Amino acid racemisation Archaeomagnetic dating Dendrochronology Ice core Incremental dating Lichenometry Paleomagnetism Radiometric dating Radiocarbon Uranium–lead Potassium–argon Tephrochronology Luminescence dating Relative dating Fluorine absorption Nitrogen dating Obsidian hydration Seriation Stratigraphy Genetic methods Molecular clock Linguistic methods Glottochronology Related topics Chronicle New Chronology Periodization Synchronoptic view Timeline Year Zero Circa Floruit Terminus post quem ASPRO chronology Portal Time in religion and mythology Time and fate deities Eternity Eschatology Golden Age Divination Prophecy Calendar Fate Philosophy of time Concepts in time Time Duration A priori and a posteriori Eternity Event Action Deterministic system Free will Eternal return A-series and B-series Temporal parts Growing block universe Multiple time dimensions Time Portal Theories of time Determinism Temporal finitism Fatalism Indeterminism Compatibilism and incompatibilism Presentism Eternalism Four dimensionalism Endurantism Perdurantism B-Theory of time Related articles Metaphysics Etiology Teleology Post hoc ergo propter hoc The Unreality of Time The Singular Universe and the Reality of Time Metaphysics Metaphysicians Parmenides Plato Aristotle Plotinus Duns Scotus Thomas Aquinas Francisco Suárez Nicolas Malebranche René Descartes John Locke David Hume Thomas Reid Immanuel Kant Isaac Newton Arthur Schopenhauer Baruch Spinoza Georg W. F. Hegel George Berkeley Gottfried Wilhelm Leibniz Henri Bergson Friedrich Nietzsche Charles Sanders Peirce Joseph Maréchal Ludwig Wittgenstein Martin Heidegger Alfred N. Whitehead Bertrand Russell Dorothy Emmet G. E. Moore Jean-Paul Sartre Gilbert Ryle Hilary Putnam P. F. Strawson R. G. Collingwood Adolph Stöhr Rudolf Carnap Saul Kripke Willard V. O. Quine G. E. M. Anscombe Donald Davidson Michael Dummett David Malet Armstrong David Lewis Alvin Plantinga Peter van Inwagen Derek Parfit more ... Theories Abstract object theory Action theory Anti-realism Determinism Dualism Enactivism Essentialism Existentialism Free will Idealism Libertarianism Liberty Materialism Meaning of life Monism Naturalism Nihilism Phenomenalism Realism Physicalism Pirsig's metaphysics of Quality Platonic idealism Relativism Scientific realism Solipsism Subjectivism Substance theory Type theory Concepts Abstract object Anima mundi Being Category of being Causality Choice Cogito ergo sum Concept Embodied cognition Entity Essence Existence Experience Hypostatic abstraction Idea Identity Identity and change Information Insight Intelligence Intention Linguistic modality Matter Meaning Memetics Mental representation Mind Motion Necessity Notion Object Pattern Perception Physical body Principle Property Qualia Quality Reality Soul Subject Substantial form Thought Time Truth Type–token distinction Universal Unobservable Value more ... Related topics Axiology Cosmology Epistemology Feminist metaphysics Interpretations of quantum mechanics Meta- Ontology Philosophy of mind Philosophy of psychology Philosophy of self Philosophy of space and time Teleology Theoretical physics Category Portal

SI base quantities
Base quantity	Quantity SI unit Name Symbol Dimension symbol Unit name (symbol) Example length l, x, r, (etc.) L metre (m) r = 10 m mass m M kilogram (kg) m = 10 kg time, duration t T second (s) t = 10 s electric current  I , i  I  ampere (A) I = 10 A thermodynamic temperature T Θ kelvin (K) T = 10 K amount of substance n N mole (mol) n = 10 mol luminous intensity Iv J candela (cd) Iv = 10 cd
Specification	The quantity (not the unit) can have a specification: Tmax = 300 K
Derived quantity	Definition A quantity Q is expressed in the base quantities: Derived dimension dim Q = La · Mb · Tc · Id · Θe · Nf · Jg (Superscripts a–g are algebraic exponents, usually a positive, negative or zero integer.) Example Quantity acceleration = l1 · t−2, dim acceleration = L1 · T−2 possible units: m1 · s−2, km1 · Ms−2, etc.
See also	History of the metric system International System of Quantities Proposed redefinitions Systems of measurement
Book Category Outline