Phosphorus

Phosphorus,  ₁₅P

waxy white (yellow cut), red (granules centre left, chunk centre right), and violet phosphorus
General properties
Pronunciation	/ˈfɒsfərəs/ FOS-fər-əs
Appearance	Colourless, waxy white, yellow, scarlet, red, violet, black
Abundance
in the Earth's crust	5.2 (taking silicon as 100)
Phosphorus in the periodic table
N ↑ P ↓ As silicon ← phosphorus → sulfur ‍
Atomic number (Z)	15
Group, period	group 15 (pnictogens), period 3
Block	p-block
Element category	polyatomic nonmetal
Standard atomic weight (Ar)	7001309737619980000♠30.973761998(5)[1]
Electron configuration	[Ne] 3s2 3p3
Electrons per shell	2, 8, 5
Physical properties
Phase (at STP)	solid
Density near r.t.	white: 1.823 g·cm−3 red: ≈ 2.2–2.34 g·cm−3 violet: 2.36 g·cm−3 black: 2.69 g/cm3
Heat of fusion	white: 0.66 kJ/mol
Heat of vaporisation	white: 51.9 kJ/mol
Molar heat capacity	white: 23.824 J/(mol·K)
Vapour pressure (white) P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 279 307 342 388 453 549
Vapour pressure (red, b.p. 431 °C) P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 455 489 529 576 635 704
Atomic properties
Oxidation states	5, 4, 3, 2, 1,[2] −1, −2, −3 ​(a mildly acidic oxide)
Electronegativity	Pauling scale: 2.19
Ionisation energies	1st: 1011.8 kJ/mol 2nd: 1907 kJ/mol 3rd: 2914.1 kJ/mol (more)
Covalent radius	107±3 pm
Van der Waals radius	180 pm
Miscellanea
Crystal structure	​body-centred cubic (bcc)
Thermal conductivity	white: 0.236 W/(m·K) black: 12.1 W/(m·K)
Magnetic ordering	white, red, violet, black: diamagnetic[3]
Magnetic susceptibility (χmol)	−20.8·10−6 cm3/mol (293 K)[4]
Bulk modulus	white: 5 GPa red: 11 GPa
CAS Number	7723-14-0 (red) 12185-10-3 (white)
History
Discovery	Hennig Brand (1669)
Recognised as an element by	Antoine Lavoisier[5] (1777)
Main isotopes of phosphorus
Iso­tope Abun­dance Half-life (t1/2) Decay mode Pro­duct 31P 100% stable 32P trace 14.28 d β− 32S 33P trace 25.3 d β− 33S

Phosphorus is a chemical element with symbol P and atomic number 15. As an element, phosphorus exists in two major forms—white phosphorus and red phosphorus—but because it is highly reactive, phosphorus is never found as a free element on Earth. At 0.099%, phosphorus is the most abundant pnictogen in the Earth's crust. With few exceptions, minerals containing phosphorus are in the maximally oxidized state as inorganic phosphate rocks.

The first form of elemental phosphorus to be produced (white phosphorus, in 1669) emits a faint glow when exposed to oxygen – hence the name, taken from Greek mythology, Φωσφόρος meaning "light-bearer" (Latin Lucifer), referring to the "Morning Star", the planet Venus (or Mercury). The term "phosphorescence", meaning glow after illumination, originally derives from this property of phosphorus, although this word has since been used for a different physical process that produces a glow. The glow of phosphorus itself originates from oxidation of the white (but not red) phosphorus — a process now termed chemiluminescence. Together with nitrogen, arsenic, antimony, and bismuth, phosphorus is classified as a pnictogen.

Phosphorus is essential for life. Phosphates (compounds containing the phosphate ion, PO₄³⁻) are a component of DNA, RNA, ATP, and the phospholipids, which form all cell membranes. Demonstrating the link between phosphorus and life, elemental phosphorus was first isolated from human urine, and bone ash was an important early phosphate source. Phosphate mines contain fossils, especially marine fossils, because phosphate is present in the fossilized deposits of animal remains and excreta. Low phosphate levels are an important limit to growth in some aquatic systems. The vast majority of phosphorus compounds produced are consumed as fertilisers. Phosphate is needed to replace the phosphorus that plants remove from the soil, and its annual demand is rising nearly twice as fast as the growth of the human population. Other applications include the role of organophosphorus compounds in detergents, pesticides, and nerve agents.

Characteristics

Allotropes

Phosphorus has several allotropes that exhibit strikingly different properties.^[6] The two most common allotropes are white phosphorus and red phosphorus.^[7]

From the perspective of applications and chemical literature, the most important form of elemental phosphorus is white phosphorus, often abbreviated as WP. It is a soft and waxy solid which consists of tetrahedral P
4 molecules, in which each atom is bound to the other three atoms by a single bond. This P
4 tetrahedron is also present in liquid and gaseous phosphorus up to the temperature of 800 °C (1,470 °F) when it starts decomposing to P
2 molecules.^[8] White phosphorus exists in two crystalline forms: α (alpha) and β (beta). At room temperature, the α-form is stable, which is more common and it has cubic crystal structure and at 195.2 K (−78.0 °C), it transforms into β-form, which has hexagonal crystal structure. These forms differ in terms of the relative orientations of the constituent P₄ tetrahedra.^[9][10]

White phosphorus is the least stable, the most reactive, the most volatile, the least dense, and the most toxic of the allotropes. White phosphorus gradually changes to red phosphorus. This transformation is accelerated by light and heat, and samples of white phosphorus almost always contain some red phosphorus and accordingly appear yellow. For this reason, white phosphorus that is aged or otherwise impure (e.g. weapons-grade, not lab-grade WP) is also called yellow phosphorus. When exposed to oxygen, white phosphorus glows in the dark with a very faint tinge of green and blue. It is highly flammable and pyrophoric (self-igniting) upon contact with air. Owing to its pyrophoricity, white phosphorus is used as an additive in napalm. The odour of combustion of this form has a characteristic garlic smell, and samples are commonly coated with white "phosphorus pentoxide", which consists of P
4O
10 tetrahedra with oxygen inserted between the phosphorus atoms and at their vertices. White phosphorus is insoluble in water but soluble in carbon disulfide.^[11]

Thermolysis of P₄ at 1100 kelvin gives diphosphorus, P₂. This species is not stable as a solid or liquid. The dimeric unit contains a triple bond and is analogous to N₂. It can also be generated as a transient intermediate in solution by thermolysis of organophosphorus precursor reagents.^[12] At still higher temperatures, P₂ dissociates into atomic P.^[11]

Red phosphorus is polymeric in structure. It can be viewed as a derivative of P₄ wherein one P-P bond is broken, and one additional bond is formed with the neighbouring tetrahedron resulting in a chain-like structure. Red phosphorus may be formed by heating white phosphorus to 250 °C (482 °F) or by exposing white phosphorus to sunlight.^[13] Phosphorus after this treatment is amorphous. Upon further heating, this material crystallises. In this sense, red phosphorus is not an allotrope, but rather an intermediate phase between the white and violet phosphorus, and most of its properties have a range of values. For example, freshly prepared, bright red phosphorus is highly reactive and ignites at about 300 °C (572 °F),^[14] though it is more stable than white phosphorus, which ignites at about 30 °C (86 °F).^[15] After prolonged heating or storage, the color darkens (see infobox images); the resulting product is more stable and does not spontaneously ignite in air.^[16]

Violet phosphorus is a form of phosphorus that can be produced by day-long annealing of red phosphorus above 550 °C. In 1865, Hittorf discovered that when phosphorus was recrystallised from molten lead, a red/purple form is obtained. Therefore, this form is sometimes known as "Hittorf's phosphorus" (or violet or α-metallic phosphorus).^[17]

Black phosphorus is the least reactive allotrope and the thermodynamically stable form below 550 °C (1,022 °F). It is also known as β-metallic phosphorus and has a structure somewhat resembling that of graphite.^[18][19] It is obtained by heating white phosphorus under high pressures (about 12,000 standard atmospheres or 1.2 gigapascals). It can also be produced at ambient conditions using metal salts, e.g. mercury, as catalysts.^[20] In appearance, properties, and structure, it resembles graphite, being black and flaky, a conductor of electricity, and has puckered sheets of linked atoms.^[21]

Another form, scarlet phosphorus, is obtained by allowing a solution of white phosphorus in carbon disulfide to evaporate in sunlight.^[17]

Properties of some allotropes of phosphorus^[6][17]

Form	white(α)	white(β)	violet	black
Symmetry	Body-centred cubic	Triclinic	Monoclinic	Orthorhombic
Pearson symbol		aP24	mP84	oS8
Space group	I43m	P1 No.2	P2/c No.13	Cmca No.64
Density (g/cm3)	1.828	1.88	2.36	2.69
Band gap (eV)	2.1		1.5	0.34
Refractive index	1.8244		2.6	2.4

Chemiluminescence

It was known from early times that the green glow emanating from white phosphorus would persist for a time in a stoppered jar, but then cease. Robert Boyle in the 1680s ascribed it to "debilitation" of the air; in fact, it is oxygen being consumed. By the 18th century, it was known that in pure oxygen, phosphorus does not glow at all;^[22] there is only a range of partial pressures at which it does. Heat can be applied to drive the reaction at higher pressures.^[23]

In 1974, the glow was explained by R. J. van Zee and A. U. Khan.^[24][25] A reaction with oxygen takes place at the surface of the solid (or liquid) phosphorus, forming the short-lived molecules HPO and P
2O
2 that both emit visible light. The reaction is slow and only very little of the intermediates are required to produce the luminescence, hence the extended time the glow continues in a stoppered jar.

Since that time, phosphors and phosphorescence were used loosely to describe substances that shine in the dark without burning. Although the term phosphorescence is derived from phosphorus, the reaction that gives phosphorus its glow is properly called chemiluminescence (glowing due to a cold chemical reaction), not phosphorescence (re-emitting light that previously fell onto a substance and excited it).^[26]

Isotopes

Twenty-three isotopes of phosphorus are known,^[27] including all possibilities from 24
P up to 46
P. Only 31
P is stable and is therefore present at 100% abundance. The half-integer nuclear spin and high abundance of ³¹P make phosphorus-31 NMR spectroscopy a very useful analytical tool in studies of phosphorus-containing samples.

Two radioactive isotopes of phosphorus have half-lives suitable for biological scientific experiments. These are:

• 32
  P, a beta-emitter (1.71 MeV) with a half-life of 14.3 days, which is used routinely in life-science laboratories, primarily to produce radiolabeled DNA and RNA probes, e.g. for use in Northern blots or Southern blots.
• 33
  P, a beta-emitter (0.25 MeV) with a half-life of 25.4 days. It is used in life-science laboratories in applications in which lower energy beta emissions are advantageous such as DNA sequencing.

The high energy beta particles from 32
P penetrate skin and corneas and any 32
P ingested, inhaled, or absorbed is readily incorporated into bone and nucleic acids. For these reasons, Occupational Safety and Health Administration in the United States, and similar institutions in other developed countries require personnel working with 32
P to wear lab coats, disposable gloves, and safety glasses or goggles to protect the eyes, and avoid working directly over open containers. Monitoring personal, clothing, and surface contamination is also required. Shielding requires special consideration. The high energy of the beta particles gives rise to secondary emission of X-rays via Bremsstrahlung (braking radiation) in dense shielding materials such as lead. Therefore, the radiation must be shielded with low density materials such as acrylic or other plastic, water, or (when transparency is not required), even wood.^[28]

Occurrence

Universe

In 2013, astronomers detected phosphorus in Cassiopeia A, which confirmed that this element is produced in supernovae as a byproduct of supernova nucleosynthesis. The phosphorus-to-iron ratio in material from the supernova remnant could be up to 100 times higher than in the Milky Way in general.^[29]

Crust and organic sources

At 0.099%, phosphorus is the most abundant pnictogen in the Earth's crust but it is not found free in nature; it is widely distributed in many minerals, mainly phosphates.^[7] Inorganic phosphate rock, which is partially made of apatite (a group of minerals being, generally, pentacalcium triorthophosphate fluoride (hydroxide)), is today the chief commercial source of this element. According to the US Geological Survey (USGS), about 50 percent of the global phosphorus reserves are in the Arab nations.^[30] Large deposits of apatite are located in China, Russia, Morocco,^[31] Florida, Idaho, Tennessee, Utah, and elsewhere.^[32] Albright and Wilson in the UK and their Niagara Falls plant, for instance, were using phosphate rock in the 1890s and 1900s from Tennessee, Florida, and the Îles du Connétable (guano island sources of phosphate); by 1950 they were using phosphate rock mainly from Tennessee and North Africa.^[33]

Organic sources, namely urine, bone ash and (in the latter 19th century) guano, were historically of importance but had only limited commercial success.^[34] As urine contains phosphorus, it has fertilising qualities which are still harnessed today in some countries, including Sweden, using methods for reuse of excreta. To this end, urine can be used as a fertiliser in its pure form or part of being mixed with water in the form of sewage or sewage sludge.

Compounds

Phosphorus(V)

The most prevalent compounds of phosphorus are derivatives of phosphate (PO₄³⁻), a tetrahedral anion.^[35] Phosphate is the conjugate base of phosphoric acid, which is produced on a massive scale for use in fertilisers. Being triprotic, phosphoric acid converts stepwise to three conjugate bases:

H₃PO₄ + H₂O ⇌ H₃O⁺ + H₂PO₄⁻       K_a1= 7.25×10⁻³

H₂PO₄⁻ + H₂O ⇌ H₃O⁺ + HPO₄²⁻       K_a2= 6.31×10⁻⁸

HPO₄²⁻ + H₂O ⇌ H₃O⁺ +  PO₄³⁻        K_a3= 3.98×10⁻¹³

Phosphate exhibits the tendency to form chains and rings with P-O-P bonds. Many polyphosphates are known, including ATP. Polyphosphates arise by dehydration of hydrogen phosphates such as HPO₄²⁻ and H₂PO₄⁻. For example, the industrially important trisodium triphosphate (also known as sodium tripolyphosphate, STPP) is produced industrially on by the megatonne by this condensation reaction:

2 Na₂[(HO)PO₃] + Na[(HO)₂PO₂] → Na₅[O₃P-O-P(O)₂-O-PO₃] + 2 H₂O

Phosphorus pentoxide (P₄O₁₀) is the acid anhydride of phosphoric acid, but several intermediates between the two are known. This waxy white solid reacts vigorously with water.

With metal cations, phosphate forms a variety of salts. These solids are polymeric, featuring P-O-M linkages. When the metal cation has a charge of 2+ or 3+, the salts are generally insoluble, hence they exist as common minerals. Many phosphate salts are derived from hydrogen phosphate (HPO₄²⁻).

PCl₅ and PF₅ are common compounds. PF₅ is a colourless gas and the molecules have trigonal bypramidal geometry. PCl₅ is a colourless solid which has an ionic formulation of PCl₄⁺ PCl₆⁻, but adopts the trigonal bypramidal geometry when molten or in the vapour phase.^[11] PBr₅ is an unstable solid formulated as PBr₄⁺Br⁻and PI₅ is not known.^[11] The pentachloride and pentafluoride are Lewis acids. With fluoride, PF₅ forms PF₆⁻, an anion that is isoelectronic with SF₆. The most important oxyhalide is phosphorus oxychloride, (POCl₃), which is approximately tetrahedral.

Before extensive computer calculations were feasible, it was thought that bonding in phosphorus(V) compounds involved d orbitals. Computer modeling of molecular orbital theory indicates that this bonding involves only s- and p-orbitals.^[36]

Phosphorus(III)

All four symmetrical trihalides are well known: gaseous PF₃, the yellowish liquids PCl₃ and PBr₃, and the solid PI₃. These materials are moisture sensitive, hydrolysing to give phosphorous acid. The trichloride, a common reagent, is produced by chlorination of white phosphorus:

P₄ + 6 Cl₂ → 4 PCl₃

The trifluoride is produced from the trichloride by halide exchange. PF₃ is toxic because it binds to haemoglobin.

Phosphorus(III) oxide, P₄O₆ (also called tetraphosphorus hexoxide) is the anhydride of P(OH)₃, the minor tautomer of phosphorous acid. The structure of P₄O₆ is like that of P₄O₁₀ without the terminal oxide groups.

Phosphorus(I) and phosphorus(II)

These compounds generally feature P-P bonds.^[11] Examples include catenated derivatives of phosphine and organophosphines. Compounds containing P=P double bonds have also been observed, although they are rare.

Phosphides and phosphines

Phosphides arise by reaction of metals with red phosphorus. The alkali metals (group 1) and alkaline earth metals can form ionic compounds containing the phosphide ion, P³⁻. These compounds react with water to form phosphine. Other phosphides, for example Na₃P₇, are known for these reactive metals. With the transition metals as well as the monophosphides there are metal rich phosphides, which are generally hard refractory compounds with a metallic lustre, and phosphorus rich phosphides which are less stable and include semiconductors.^[37] Schreibersite is a naturally occurring metal rich phosphide found in meteorites. The structures of the metal rich and phosphorus rich phosphides can be structurally complex.

Phosphine (PH₃) and its organic derivatives (PR₃) are structural analogues with ammonia (NH₃) but the bond angles at phosphorus are closer to 90° for phosphine and its organic derivatives. It is an ill-smelling, toxic compound. Phosphorus has an oxidation number of -3 in phosphine. Phosphine is produced by hydrolysis of calcium phosphide, Ca₃P₂. Unlike ammonia, phosphine is oxidised by air. Phosphine is also far less basic than ammonia. Other phophines are known which contain chains of up to nine phosphorus atoms and have the formula P_nH_n+2.^[11] The highly flammable gas diphosphine (P₂H₄) is an analogue of hydrazine.

Oxoacids

Phosphorous oxoacids are extensive, often commercially important, and sometimes structurally complicated. They all have acidic protons bound to oxygen atoms, some have nonacidic protons that are bonded directly to phosphorus and some contain phosphorus - phosphorus bonds.^[11] Although many oxoacids of phosphorus are formed, only nine are important, and three of them, hypophosphorous acid, phosphorous acid, and phosphoric acid, are particularly important.

Oxidation state	Formula	Name	Acidic protons	Compounds
+1	HH2PO2	hypophosphorous acid	1	acid, salts
+3	H2HPO3	phosphorous acid	2	acid, salts
+3	HPO2	metaphosphorous acid	1	salts
+3	H3PO3	(ortho)phosphorous acid	3	acid, salts
+4	H4P2O6	hypophosphoric acid	4	acid, salts
+5	(HPO3)n	metaphosphoric acids	n	salts (n=3,4,6)
+5	H(HPO3)nOH	polyphosphoric acids	n+2	acids, salts (n=1-6)
+5	H5P3O10	tripolyphosphoric acid	3	salts
+5	H4P2O7	pyrophosphoric acid	4	acid, salts
+5	H3PO4	(ortho)phosphoric acid	3	acid, salts

Nitrides

The PN molecule is considered unstable, but is a product of crystalline phosphorus nitride decomposition at 1100 K. Similarly, H₂PN is considered unstable, and phosphorus nitride halogens like F₂PN, Cl₂PN, Br₂PN, and I₂PN oligomerise into cyclic Polyphosphazenes. For example, compounds of the formula (PNCl₂)_n exist mainly as rings such as the trimer hexachlorophosphazene. The phosphazenes arise by treatment of phosphorus pentachloride with ammonium chloride:

PCl₅ + NH₄Cl → 1/n (NPCl₂)_n + 4 HCl

When the chloride groups are replaced by alkoxide (RO⁻), a family of polymers is produced with potentially useful properties.^[38]

Sulfides

Phosphorus forms a wide range of sulfides, where the phosphorus can be in P(V), P(III) or other oxidation states. The most famous is the three-fold symmetric P₄S₃ which is used in strike-anywhere matches. P₄S₁₀ and P₄O₁₀ have analogous structures.^[39] Mixed oxyhalides and oxyhydrides of phosphorus(III) are almost unknown.

Organophosphorus compounds

Compounds with P-C and P-O-C bonds are often classified as organophosphorus compounds. They are widely used commercially. The PCl₃ serves as a source of P³⁺ in routes to organophosphorus(III) compounds. For example, it is the precursor to triphenylphosphine:

PCl₃ + 6 Na + 3 C₆H₅Cl → P(C₆H₅)₃ + 6 NaCl

Treatment of phosphorus trihalides with alcohols and phenols gives phosphites, e.g. triphenylphosphite:

PCl₃ + 3 C₆H₅OH → P(OC₆H₅)₃ + 3 HCl

Similar reactions occur for phosphorus oxychloride, affording triphenylphosphate:

OPCl₃ + 3 C₆H₅OH → OP(OC₆H₅)₃ + 3 HCl

History

The name Phosphorus in Ancient Greece was the name for the planet Venus and is derived from the Greek words (φῶς = light, φέρω = carry), which roughly translates as light-bringer or light carrier.^[13] (In Greek mythology and tradition, Augerinus (Αυγερινός = morning star, still in use today), Hesperus or Hesperinus (΄Εσπερος or Εσπερινός or Αποσπερίτης = evening star, still in use today) and Eosphorus (Εωσφόρος = dawnbearer, not in use for the planet after Christianity) are close homologues, and also associated with Phosphorus-the-planet).

According to the Oxford English Dictionary, the correct spelling of the element is phosphorus. The word phosphorous is the adjectival form of the P³⁺ valence: so, just as sulfur forms sulfurous and sulfuric compounds, phosphorus forms phosphorous compounds (e.g., phosphorous acid) and P⁵⁺ valence phosphoric compounds (e.g., phosphoric acids and phosphates).

Discovery

The discovery of phosphorus, the first element to be discovered that was not known since ancient times,^[40] is credited to the German alchemist Hennig Brand in 1669, although other chemists might have discovered phosphorus around the same time.^[41] Brand experimented with urine, which contains considerable quantities of dissolved phosphates from normal metabolism.^[13] Working in Hamburg, Brand attempted to create the fabled philosopher's stone through the distillation of some salts by evaporating urine, and in the process produced a white material that glowed in the dark and burned brilliantly. It was named phosphorus mirabilis ("miraculous bearer of light").^[42]

Brand's process originally involved letting urine stand for days until it gave off a terrible smell. Then he boiled it down to a paste, heated this paste to a high temperature, and led the vapours through water, where he hoped they would condense to gold. Instead, he obtained a white, waxy substance that glowed in the dark. Brand had discovered phosphorus. We now know that Brand produced ammonium sodium hydrogen phosphate, (NH
4)NaHPO
4. While the quantities were essentially correct (it took about 1,100 litres [290 US gal] of urine to make about 60 g of phosphorus), it was unnecessary to allow the urine to rot. Later scientists discovered that fresh urine yielded the same amount of phosphorus.^[26]

Brand at first tried to keep the method secret,^[43] but later sold the recipe for 200 thalers to D Krafft from Dresden,^[13] who could now make it as well, and toured much of Europe with it, including England, where he met with Robert Boyle. The secret that it was made from urine leaked out and first Johann Kunckel (1630–1703) in Sweden (1678) and later Boyle in London (1680) also managed to make phosphorus, possibly with the aid of his assistant, Ambrose Godfrey-Hanckwitz, who later made a business of the manufacture of phosphorus.

Boyle states that Krafft gave him no information as to the preparation of phosphorus other than that it was derived from "somewhat that belonged to the body of man". This gave Boyle a valuable clue, so that he, too, managed to make phosphorus, and published the method of its manufacture.^[13] Later he improved Brand's process by using sand in the reaction (still using urine as base material),

4 NaPO
3 + 2 SiO
2 + 10 C → 2 Na
2SiO
3 + 10 CO + P
4

Robert Boyle was the first to use phosphorus to ignite sulfur-tipped wooden splints, forerunners of our modern matches, in 1680.^[44]

Phosphorus was the 13th element to be discovered. For this reason, and due to its use in explosives, poisons and nerve agents, it is sometimes referred to as "the Devil's element".^[45]

Bone ash and guano

In 1769 Johan Gottlieb Gahn and Carl Wilhelm Scheele showed that calcium phosphate (Ca
3(PO
4)
2) is found in bones, and they obtained elemental phosphorus from bone ash. Antoine Lavoisier recognised phosphorus as an element in 1777.^[46] Bone ash was the major source of phosphorus until the 1840s. The method started by roasting bones, then employed the use of clay retorts encased in a very hot brick furnace to distill out the highly toxic elemental phosphorus product.^[47] Alternately, precipitated phosphates could be made from ground-up bones that had been de-greased and treated with strong acids. White phosphorus could then be made by heating the precipitated phosphates, mixed with ground coal or charcoal in an iron pot, and distilling off phosphorus vapour in a retort.^[48] Carbon monoxide and other flammable gases produced during the reduction process were burnt off in a flare stack.

In the 1840s, world phosphate production turned to the mining of tropical island deposits formed from bird and bat guano (see also Guano Islands Act). These became an important source of phosphates for fertiliser in the latter half of the 19th century.^[49]

Phosphate rock

Phosphate rock, which usually contains calcium phosphate, was first used in 1850 to make phosphorus, and following the introduction of the electric arc furnace in 1890, elemental phosphorus production switched from the bone-ash heating, to electric arc production from phosphate rock. After the depletion of world guano sources about the same time, mineral phosphates became the major source of phosphate fertiliser production. Phosphate rock production greatly increased after World War II, and remains the primary global source of phosphorus and phosphorus chemicals today. See the article on peak phosphorus for more information on the history and present state of phosphate mining. Phosphate rock remains a feedstock in the fertiliser industry, where it is treated with sulfuric acid to produce various "superphosphate" fertiliser products.

Incendiaries

White phosphorus was first made commercially in the 19th century for the match industry. This used bone ash for a phosphate source, as described above. The bone-ash process became obsolete when the submerged-arc furnace for phosphorus production was introduced to reduce phosphate rock.^[50][51] The electric furnace method allowed production to increase to the point where phosphorus could be used in weapons of war.^[24][52] In World War I it was used in incendiaries, smoke screens and tracer bullets.^[52] A special incendiary bullet was developed to shoot at hydrogen-filled Zeppelins over Britain (hydrogen being highly flammable).^[52] During World War II, Molotov cocktails made of phosphorus dissolved in petrol were distributed in Britain to specially selected civilians within the British resistance operation, for defence; and phosphorus incendiary bombs were used in war on a large scale. Burning phosphorus is difficult to extinguish and if it splashes onto human skin it has horrific effects.^[11]

Early matches used white phosphorus in their composition, which was dangerous due to its toxicity. Murders, suicides and accidental poisonings resulted from its use. (An apocryphal tale tells of a woman attempting to murder her husband with white phosphorus in his food, which was detected by the stew's giving off luminous steam).^[24] In addition, exposure to the vapours gave match workers a severe necrosis of the bones of the jaw, the infamous "phossy jaw". When a safe process for manufacturing red phosphorus was discovered, with its far lower flammability and toxicity, laws were enacted, under the Berne Convention (1906), requiring its adoption as a safer alternative for match manufacture.^[53] The toxicity of white phosphorus led to discontinuation of its use in matches.^[54] The Allies used phosphorus incendiary bombs in World War II to destroy Hamburg, the place where the "miraculous bearer of light" was first discovered.^[42]

Production

Most production of phosphorus-bearing material is for agriculture fertilisers. For this purpose, phosphate minerals are converted to phosphoric acid. It follows two distinct chemical routes, the main one being treatment of phosphate minerals with sulfuric acid. The other process utilises white phosphorus, which may be produced by reaction and distillation from very low grade phosphate sources. The white phosphorus is then oxidised to phosphoric acid and subsequently neutralised with base to give phosphate salts. Phosphoric acid produced from white phosphorus is relatively pure and is the main route for the production of phosphates for all purposes, including detergent production.

In the early 1990s Albright and Wilson's purified wet phosphoric acid business was being adversely affected by phosphate rock sales by China and the entry of their long-standing Moroccan phosphate suppliers into the purified wet phosphoric acid business.^[55]

Peak phosphorus

In 2017, the USGS estimated 68 billion tons of world reserves, where reserve figures refer to the amount assumed recoverable at current market prices; 0.261 billion tons were mined in 2016.^[56] Critical to contemporary agriculture, its annual demand is rising nearly twice as fast as the growth of the human population.^[31]

The production of phosphorus may have peaked already (as per 2011), leading to the possibility of global shortages by 2040.^[57] In 2007, at the rate of consumption, the supply of phosphorus was estimated to run out in 345 years.^[58] However, some scientists now believe that a "peak phosphorus" will occur in 30 years and that "At current rates, reserves will be depleted in the next 50 to 100 years."^[59] Cofounder of Boston-based investment firm and environmental foundation Jeremy Grantham wrote in Nature in November 2012 that consumption of the element "must be drastically reduced in the next 20-40 years or we will begin to starve."^[31][60] According to N.N. Greenwood and A. Earnshaw, authors of the textbook, Chemistry of the Elements, however, phosphorus comprises about 0.1% by mass of the average rock, and consequently the Earth's supply is vast, although dilute.^[11]

Elemental phosphorus

Presently, about 1,000,000 short tons (910,000 t) of elemental phosphorus is produced annually. Calcium phosphate (phosphate rock), mostly mined in Florida and North Africa, can be heated to 1,200–1,500 °C with sand, which is mostly SiO
2, and coke (refined coal) to produce vaporised P
4. The product is subsequently condensed into a white powder under water to prevent oxidation by air. Even under water, white phosphorus is slowly converted to the more stable red phosphorus allotrope. The chemical equation for this process when starting with fluoroapatite, a common phosphate mineral, is:

4 Ca₅(PO₄)₃F + 18 SiO₂ + 30 C → 3 P₄ + 30 CO + 18 CaSiO₃ + 2 CaF₂

Side products from this process include ferrophosphorus, a crude form of Fe₂P, resulting from iron impurities in the mineral precursors. The silicate slag is a useful construction material. The fluoride is sometimes recovered for use in water fluoridation. More problematic is a "mud" containing significant amounts of white phosphorus. Production of white phosphorus is conducted in large facilities in part because it is energy intensive. The white phosphorus is transported in molten form. Some major accidents have occurred during transportation; train derailments at Brownston, Nebraska and Miamisburg, Ohio led to large fires. The worst incident in recent times was an environmental contamination in 1968 when the sea was polluted from spillage and/or inadequately treated sewage from a white phosphorus plant at Placentia Bay, Newfoundland.^[61]

Another process by which elemental phosphorus is extracted includes applying at high temperatures (1500 °C):^[62]

2 Ca₃(PO₄)₂ + 6 SiO₂ + 10 C → 6 CaSiO₃ + 10 CO + P₄

Historically, before the development of mineral-based extractions, white phosphorus was isolated on an industrial scale from bone ash.^[63] In this process, the tricalcium phosphate in bone ash is converted to monocalcium phosphate with sulfuric acid:

Ca₃(PO₄)₂ + 2 H₂SO₄ → Ca(H₂PO₄)₂ + 2 CaSO₄

Monocalcium phosphate is then dehydrated to the corresponding metaphosphate:

Ca(H₂PO₄)₂ → Ca(PO₃)₂ + 2 H₂O

When ignited to a white heat with charcoal, calcium metaphosphate yields two-thirds of its weight of white phosphorus while one-third of the phosphorus remains in the residue as calcium orthophosphate:

3 Ca(PO₃)₂ + 10 C → Ca₃(PO₄)₂ + 10 CO + P₄

Applications

Fertiliser

Phosphorus is an essential plant nutrient (often the limiting nutrient), and the bulk of all phosphorus production is in concentrated phosphoric acids for agriculture fertilisers, containing as much as 70% to 75% P₂O₅. Its annual demand is rising nearly twice as fast as the growth of the human population. That led to large increase in phosphate (PO₄³⁻) production in the second half of the 20th century.^[31] Artificial phosphate fertilisation is necessary because phosphorus is essential to all life organisms, natural phosphorus-bearing compounds are mostly insoluble and inaccessible to plants, and the natural cycle of phosphorus is very slow. Fertiliser is often in the form of superphosphate of lime, a mixture of calcium dihydrogen phosphate (Ca(H₂PO₄)₂), and calcium sulfate dihydrate (CaSO₄·2H₂O) produced reacting sulfuric acid and water with calcium phosphate.

Processing phosphate minerals with sulfuric acid for obtaining fertiliser is so important to the global economy that this is the primary industrial market for sulfuric acid and the greatest industrial use of elemental sulfur.^[64]

Widely used compounds	Use
Ca(H2PO4)2·H2O	Baking powder and fertilisers
CaHPO4·2H2O	Animal food additive, toothpowder
H3PO4	Manufacture of phosphate fertilisers
PCl3	Manufacture of POCl3 and pesticides
POCl3	Manufacture of plasticiser
P4S10	Manufacturing of additives and pesticides
Na5P3O10	Detergents

Organophosphorus

White phosphorus is widely used to make organophosphorus compounds through intermediate phosphorus chlorides and two phosphorus sulfides, phosphorus pentasulfide, and phosphorus sesquisulfide.^[65] Organophosphorus compounds have many applications, including in plasticisers, flame retardants, pesticides, extraction agents, nerve agents, and water treatment.^[11][66]

Metallurgical aspects

Phosphorus is also an important component in steel production, in the making of phosphor bronze, and in many other related products.^[67][68] Phosphorus is added to metallic copper during its smelting process to react with oxygen present as an impurity in copper and to produce phosphorus-containing copper (CuOFP) alloys with a higher hydrogen embrittlement resistance than normal copper.^[69]

Matches

The first striking match with a phosphorus head was invented by Charles Sauria in 1830. These matches (and subsequent modifications) were made with heads of white phosphorus, an oxygen-releasing compound (potassium chlorate, lead dioxide, or sometimes nitrate), and a binder. They were poisonous to the workers in manufacture,^[70] sensitive to storage conditions, toxic if ingested, and hazardous when accidentally ignited on a rough surface.^[71][72] Production in several countries was banned between 1872 and 1925.^[73] The international Berne Convention, ratified in 1906, prohibited the use of white phosphorus in matches.

In consequence, the 'strike-anywhere' matches were gradually replaced by 'safety matches', wherein the white phosphorus was replaced by phosphorus sesquisulfide (P₄S₃), sulfur, or antimony sulfide. Such matches are difficult to ignite on any surface other than a special strip. The strip contains red phosphorus that heats up upon striking, reacts with the oxygen-releasing compound in the head, and ignites the flammable material of the head.^[14][65]

Water softening

Sodium tripolyphosphate made from phosphoric acid is used in laundry detergents in some countries, but banned for this use in others.^[16] This compound softens the water to enhance the performance of the detergents and to prevent pipe/boiler tube corrosion.^[74]

Miscellaneous

• Phosphates are used to make special glasses for sodium lamps.^[16]
• Bone-ash, calcium phosphate, is used in the production of fine china.^[16]
• Phosphoric acid made from elemental phosphorus is used in food applications such as soft drinks, and as a starting point for food grade phosphates.^[65] These include mono-calcium phosphate for baking powder and sodium tripolyphosphate.^[65] Phosphates are used to improve the characteristics of processed meat and cheese, and in toothpaste.^[65]
• White phosphorus, called "WP" (slang term "Willie Peter") is used in military applications as incendiary bombs, for smoke-screening as smoke pots and smoke bombs, and in tracer ammunition. It is also a part of an obsolete M34 White Phosphorus US hand grenade. This multipurpose grenade was mostly used for signaling, smoke screens, and inflammation; it could also cause severe burns and had a psychological impact on the enemy.^[75][76] Military uses of white phosphorus are constrained by international law.
• In trace amounts, phosphorus is used as a dopant for n-type semiconductors.
• ³²P and ³³P are used as radioactive tracers in biochemical laboratories.^[77]
• Phosphate is a strong complexing agent for the hexavalent uranyl (UO₂²⁺) species; for this reason, apatite and other natural phosphates can be very rich in uranium.
• Tributylphosphate is an organophosphate soluble in kerosene used to extract uranium in the Purex process for reprocessing spent nuclear fuel.

Biological role

Inorganic phosphorus in the form of the phosphate PO3−
4 is required for all known forms of life.^[78] Phosphorus plays a major role in the structural framework of DNA and RNA. Living cells use phosphate to transport cellular energy with adenosine triphosphate (ATP), necessary for every cellular process that uses energy. ATP is also important for phosphorylation, a key regulatory event in cells. Phospholipids are the main structural components of all cellular membranes. Calcium phosphate salts assist in stiffening bones.^[11]

Every living cell is encased in a membrane that separates it from its surroundings. Cellular membranes are composed of a phospholipid matrix and proteins, typically in the form of a bilayer. Phospholipids are derived from glycerol with two of the glycerol hydroxyl (OH) protons replaced by fatty acids as an ester, and the third hydroxyl proton has been replaced with phosphate bonded to another alcohol.^[79]

An average adult human contains about 0.7 kg of phosphorus, about 85–90% in bones and teeth in the form of apatite, and the remainder in soft tissues and extracellular fluids (~1%). The phosphorus content increases from about 0.5 weight% in infancy to 0.65–1.1 weight% in adults. Average phosphorus concentration in the blood is about 0.4 g/L, about 70% of that is organic and 30% inorganic phosphates.^[80] An adult with healthy diet consumes and excretes about 1–3 grams of phosphorus per day, with consumption in the form of inorganic phosphate and phosphorus-containing biomolecules such as nucleic acids and phospholipids; and excretion almost exclusively in the form of phosphate ions such as H
2PO−
4 and HPO2−
4. Only about 0.1% of body phosphate circulates in the blood, paralleling the amount of phosphate available to soft tissue cells.

Bone and teeth enamel

The main component of bone is hydroxyapatite as well as amorphous forms of calcium phosphate, possibly including carbonate. Hydroxyapatite is the main component of tooth enamel. Water fluoridation enhances the resistance of teeth to decay by the partial conversion of this mineral to the still harder material called fluoroapatite:^[11]

Ca
5(PO
4)
3OH + F−
→ Ca
5(PO
4)
3F + OH−

Phosphorus deficiency

In medicine, phosphate deficiency syndrome may be caused by malnutrition, by failure to absorb phosphate, and by metabolic syndromes that draw phosphate from the blood (such as re-feeding after malnutrition) or pass too much of it into the urine. All are characterised by hypophosphatemia, which is a condition of low levels of soluble phosphate levels in the blood serum and inside the cells. Symptoms of hypophosphatemia include neurological dysfunction and disruption of muscle and blood cells due to lack of ATP. Too much phosphate can lead to diarrhoea and calcification (hardening) of organs and soft tissue, and can interfere with the body's ability to use iron, calcium, magnesium, and zinc.^[81]

Phosphorus is an essential macromineral for plants, which is studied extensively in edaphology to understand plant uptake from soil systems. Phosphorus is a limiting factor in many ecosystems; that is, the scarcity of phosphorus limits the rate of organism growth. An excess of phosphorus can also be problematic, especially in aquatic systems where eutrophication sometimes leads to algal blooms.^[31]

Food sources

The main food sources for phosphorus are the same as those containing protein, although proteins do not contain phosphorus. For example, milk, meat, and soya typically also have phosphorus. As a rule, if a diet has sufficient protein and calcium, the amount of phosphorus is probably sufficient.^[82]

Precautions

Organic compounds of phosphorus form a wide class of materials; many are required for life, but some are extremely toxic. Fluorophosphate esters are among the most potent neurotoxins known. A wide range of organophosphorus compounds are used for their toxicity as pesticides (herbicides, insecticides, fungicides, etc.) and weaponised as nerve agents against enemy humans. Most inorganic phosphates are relatively nontoxic and essential nutrients.^[11]

The white phosphorus allotrope presents a significant hazard because it ignites in air and produces phosphoric acid residue. Chronic white phosphorus poisoning leads to necrosis of the jaw called "phossy jaw". White phosphorus is toxic, causing severe liver damage on ingestion and may cause a condition known as "Smoking Stool Syndrome".^[83]

In the past, external exposure to elemental phosphorus was treated by washing the affected area with 2% copper sulfate solution to form harmless compounds that are then washed away. According to the recent US Navy's Treatment of Chemical Agent Casualties and Conventional Military Chemical Injuries: FM8-285: Part 2 Conventional Military Chemical Injuries, "Cupric (copper(II)) sulfate has been used by U.S. personnel in the past and is still being used by some nations. However, copper sulfate is toxic and its use will be discontinued. Copper sulfate may produce kidney and cerebral toxicity as well as intravascular hemolysis."^[84]

The manual suggests instead "a bicarbonate solution to neutralise phosphoric acid, which will then allow removal of visible white phosphorus. Particles often can be located by their emission of smoke when air strikes them, or by their phosphorescence in the dark. In dark surroundings, fragments are seen as luminescent spots. Promptly debride the burn if the patient's condition will permit removal of bits of WP (white phosphorus) that might be absorbed later and possibly produce systemic poisoning. DO NOT apply oily-based ointments until it is certain that all WP has been removed. Following complete removal of the particles, treat the lesions as thermal burns."^{[note 1]} As white phosphorus readily mixes with oils, any oily substances or ointments are not recommended until the area is thoroughly cleaned and all white phosphorus removed.

People can be exposed to phosphorus in the workplace by inhalation, ingestion, skin contact, and eye contact. The Occupational Safety and Health Administration (OSHA) has set the phosphorus exposure limit (Permissible exposure limit) in the workplace at 0.1 mg/m³ over an 8-hour workday. The National Institute for Occupational Safety and Health (NIOSH) has set a Recommended exposure limit (REL) of 0.1 mg/m³ over an 8-hour workday. At levels of 5 mg/m³, phosphorus is immediately dangerous to life and health.^[85]

US DEA List I status

Phosphorus can reduce elemental iodine to hydroiodic acid, which is a reagent effective for reducing ephedrine or pseudoephedrine to methamphetamine.^[86] For this reason, red and white phosphorus were designated by the United States Drug Enforcement Administration as List I precursor chemicals under 21 CFR 1310.02 effective on November 17, 2001.^[87] In the United States, handlers of red or white phosphorus are subject to stringent regulatory controls.^[87][88][89]

Notes

1. ↑ This quote uses the word "phosphorescence", which is incorrect; WP, (white phosphorus), exhibits chemoluminescence upon exposure to air and if there is any WP in the wound, covered by tissue or fluids such as blood serum, it will not chemoluminesce until it is moved to a position where the air can get at it and activate the chemoluminescent glow, which requires a very dark room and dark-adapted eyes to see clearly

References

Bibliography