Perchloric acid

Perchloric acid
Names
Systematic IUPAC name
chloric(VII) acid
Other names
Hyperchloric acid[1]
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.028.648
EC Number 231-512-4
RTECS number SC7500000
UN number 1873
Properties
HClO4
Molar mass 100.46 g/mol
Appearance colorless liquid
Odor odorless
Density 1.768 g/cm3
Melting point −17 °C (1 °F; 256 K) (azeotrope)[2]
-112 °C (anhydrous)
Boiling point 203 °C (397 °F; 476 K) (azeotrope)[3]
miscible
Acidity (pKa) -15.2 (±2.0);[4] ≈ −10
Hazards
Safety data sheet ICSC 1006
Oxidant (O)
Corrosive (C)
R-phrases (outdated) R5, R8, R35
S-phrases (outdated) (S1/2), S23, S26, S36, S45
NFPA 704
Related compounds
Related compounds
 Hydrochloric acid
Hypochlorous acid
Chlorous acid
Chloric acid
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Perchloric acid is a mineral acid with the formula HClO4. Usually found as an aqueous solution, this colorless compound is a stronger acid than sulfuric and nitric acid. It is a powerful oxidizer when hot, but its aqueous solutions up to approximately 70% by weight at room temperature are generally safe, only showing strong acid features and no oxidizing properties. Perchloric acid is useful for preparing perchlorate salts, especially ammonium perchlorate, an important rocket fuel component. Perchloric acid is dangerously corrosive and readily forms potentially explosive mixtures.

Production

Perchloric acid is produced industrially by two routes. The traditional method exploits the high aqueous solubility of sodium perchlorate (209 g/100 mL of water at room temperature). Treatment of such solutions with hydrochloric acid gives perchloric acid, precipitating solid sodium chloride:

NaClO4 + HCl → NaCl + HClO4

The concentrated acid can be purified by distillation. The alternative route, which is more direct and avoids salts, entails anodic oxidation of aqueous chlorine at a platinum electrode.[5][6]

Laboratory preparations

Treatment of barium perchlorate with sulfuric acid precipitates barium sulfate, leaving perchloric acid. It can also be made by mixing nitric acid with ammonium perchlorate and boiling while adding hydrochloric acid. The reaction gives nitrous oxide and perchloric acid due to a concurrent reaction involving the ammonium ion and can be concentrated and purified significantly by boiling off the remaining nitric and hydrochloric acids.

Properties

Anhydrous perchloric acid is an unstable oily liquid at room temperature. It forms at least five hydrates, several of which have been characterized crystallographically. These solids consist of the perchlorate anion linked via hydrogen bonds to H2O and H3O+ centers[7] Perchloric acid forms an azeotrope with water, consisting of about 72.5% perchloric acid. This form of the acid is stable indefinitely and is commercially available. Such solutions are hygroscopic. Thus, if left open to the air, concentrated perchloric acid dilutes itself by absorbing water from the air.

Dehydration of perchloric acid gives the anhydride dichlorine heptoxide:[8]

2 HClO4 + P4O10 → Cl2O7 + "H2P4O11"

Uses

Perchloric acid is mainly produced as a precursor to ammonium perchlorate, which is used in rocket fuel. The growth in rocketry has led to increased production of perchloric acid. Several million kilograms are produced annually.[5] Perchloric acid is one of the most proven materials for etching of liquid crystal displays and critical electronics applications as well as ore extraction and has unique properties in analytical chemistry.[9] Additionally it is a useful component in etching of chrome[10]

As an acid

Perchloric acid, a superacid, is one of the strongest Brønsted–Lowry acids. Its pKa is −10,[11] -15.2 (±2.0).[4] It provides strong acidity with minimal interference because perchlorate is weakly nucleophilic (explaining the high acidity of HClO4). Other acids of noncoordinating anions, such as fluoroboric acid and hexafluorophosphoric acid are susceptible to hydrolysis, whereas perchloric acid is not. Despite hazards associated with the explosiveness of its salts, the acid is often preferred in certain syntheses.[12] For similar reasons, it is a useful eluent in ion-exchange chromatography.

It is also used for electropolishing/etching of aluminium, molybdenum, and other metals.

Safety

Given its strong oxidizing properties, perchloric acid is subject to extensive regulations.[13] It is highly reactive with metals (e.g., aluminium) and organic matter (wood, plastics). On February 20, 1947, in Los Angeles California, 17 people were killed and 150 injured when a bath, consisting of over 1000 litres of 75% perchloric acid and 25% acetic anhydride by volume, exploded. The plant, 25 other buildings and 40 automobiles were obliterated and 250 nearby homes were damaged. The bath was being used to electro-polish aluminium furniture. In addition, organic compounds were added to the overheating bath when an iron rack was replaced with one coated with cellulose acetobutyrate (Tenit-2 plastic). A few minutes later the bath exploded.[14][15]

Work conducted with perchloric acid must be conducted in fume hoods with a wash-down capability to prevent accumulation of oxidisers in the ductwork.

See also

References

  1. ↑ Samuel Fomon. Medicine and the Allied Sciences. 1. p. 148.
  2. ↑ Safety data for concentrated perchloric acid, ca. 70% msds.chem.ox.ac.uk
  3. ↑ Handling of Perchloric acid ameslab.gov
  4. 1 2 Trummal, A.; Lipping, L.; Kaljurand, I.; Koppel, I. A.; Leito, I. "Acidity of Strong Acids in Water and Dimethyl Sulfoxide" J. Phys. Chem. A. 2016, 120, 3663-3669. doi:10.1021/acs.jpca.6b02253
  5. 1 2 Helmut Vogt, Jan Balej, John E. Bennett, Peter Wintzer, Saeed Akbar Sheikh, Patrizio Gallone "Chlorine Oxides and Chlorine Oxygen Acids" in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06_483.
  6. ↑ Müler, W.; Jönck, P. (1963). "Herstellung von Perchlorsäure durch anodische Oxydation von Chlor". Chemie Ingenieur Technik - CIT. 35 (2): 78. doi:10.1002/cite.330350203.; German patent DE1031288B; US patent US2846383A
  7. ↑ Almlöf, Jan; Lundgren, Jan O.; Olovsson, Ivar "Hydrogen Bond Studies. XLV. Crystal structure of perchloric acid 2.5 hydrate" Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry 1971, volume 27, pp. 898-904.doi:10.1107/S0567740871003236
  8. ↑ Holleman, Arnold F.; Wiberg, Egon (2001). Inorganic chemistry. Translated by Mary Eagleson, William Brewer. San Diego: Academic Press. p. 464. ISBN 0-12-352651-5.
  9. ↑ "Perchloric Acid". GFS chemicals.
  10. ↑ "Metal Etching". Thayer School of Engineering.
  11. ↑ Kathleen Sellers; Katherine Weeks; William R. Alsop; Stephen R. Clough; Marilyn Hoyt; Barbara Pugh (2006). Perchlorate: environmental problems and solutions. CRC Press. p. 16. ISBN 0-8493-8081-2.
  12. ↑ A. T. Balaban, C. D. Nenitzescu, K. Hafner and H. Kaiser (1973). "2,4,6-Trimethylpyrilium Perchlorate". Org. Synth.; Coll. Vol., 5, p. 1106
  13. ↑ Perchloric Acid, 60%, GR Material Safety Data Sheet Seton Resource Center
  14. ↑ R. C. Nester; G. F. Vander Voort (1992). Safety in the Metallographic Laboratory. ASTM Standardization News. p. 34.
  15. ↑ "CALIFORNIA: The Amazing Brew". Time.com. March 3, 1947.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.