Pennsylvania Route 283

PA Route 283
Route information
Maintained by PennDOT
Length:	29.112 mi[1] (46.851 km)
Existed:	1967 – present
Major junctions
West end:	South Eisenhower Boulevard in Highspire
	I-76 / Penna Turnpike in Lower Swatara Township I-283 in Lower Swatara Township SR 3032 near Harrisburg PA 230 near Mount Joy
East end:	US 30 in Lancaster
Location
Counties:	Dauphin, Lancaster
Highway system
Pennsylvania State Route System Interstate US State Scenic Byways Legislative ← I-283 PA 284 → ← PA 299 SR 300 PA 301 →

Pennsylvania Route 283 (PA Route 283 or PA 283, officially State Route 300 or SR 300 due to the presence of Interstate 283) is a 29-mile-long (47 km) state highway in the U.S. state of Pennsylvania. It connects Harrisburg to Lancaster as a freeway, paralleling the old U.S. Route 230 (now partly Pennsylvania Route 230). The number was assigned based on the proximity of Interstate 283, but Interstate 283 and PA 283 are not the same roadway; the two intersect at a cloverleaf interchange. Because the road is built to Interstate standards, it is one of the few non-interstate designated highways in Pennsylvania with a posted speed limit of 65 mph (105 km/h) for a considerable distance.

Route description

Dauphin County

PA 283 reassurance shield.

PA 283 begins at an intersection with Eisenhower Boulevard (Quadrant Route 3001) near Highspire that connects to Pennsylvania Route 230. PA 283 is one of few Pennsylvania Highways to end at a Quadrant Route. From there, PA 283 intersects Interstate 283 at exit 1 and Interstate 76 (Pennsylvania Turnpike) at exit 247 (Harrisburg East exit) at a cloverleaf interchange. East of I-283 and I-76, PA 283 is a 29-mile-long (47 km) freeway. In Lower Swatara Township, PA 283 has an exit to the Airport Connector freeway (Quadrant Route 3032) that connects to Harrisburg International Airport and Pennsylvania Route 441. This exit has access to Penn State Harrisburg. East of PA 441, PA 283 has an exit to Union Street and Fulling Mill Road which are detours to PA 441. After crossing the Swatara Creek and entering Londonderry Township, PA 283 has an exit to Hummelstown on Vine Street. In Middletown, PA 283 passes over I-76/PA Turnpike and Pennsylvania Route 341. The next exit is an exit that leads to both PA 341 and PA 230.

Lancaster County

PA 283 begins and splits from U.S. Route 30.

The first exit in Lancaster County is an exit to Pennsylvania Route 743. Just east of PA 743, PA 283 passes under Pennsylvania Route 241. In Mount Joy, PA 283 has an exit to Rheems and Elizabethtown. In Rapho Township, PA 283 interchanges with Pennsylvania Route 772. The next exit is split up into two interchanges that lead to the eastern terminus of PA 230 on the Harrisburg Pike. (East of here, PA 283 has a narrow median strip as it is using old Route 230.) In East Hempfield Township, PA 283 interchanges with Spooky Nook Road to Salunga. The next exit is a diamond interchange with the western terminus of Pennsylvania Route 722. In Manheim Township, PA 283 interchanges with Pennsylvania Route 741 and Pennsylvania Route 72. PA 283 terminates (ends) at an interchange with U.S. Route 30 in Lancaster. The first exit is to US 30 west, then the second exit is to Fruitville Pike, and the final exit is to US 30 east.^[2][3]

History

PA 283 was first designated in Berks County, Pennsylvania on an approximately one mile road connecting Monocacy Station, Pennsylvania, to Monocacy, Pennsylvania. Between the two towns is the Schuylkill River, and the state owned the bridge which spanned it - one of the many bridges the state had been taking over since the passage of the Sproul Road Bill in 1911. The main road to the south, going through Monocacy Station was then designated as Pennsylvania Route 83 (today it is Pennsylvania Route 724). PA 283 connected 83 to the Benjamin Franklin Highway, US 422, on the north side in Monocacy. The Department of Highways removed the designation in 1946.

In 1961, the designation was revived in the suburbs of Harrisburg, Pennsylvania. It was designated on a section of Eisenhower Boulevard between then US 230 and the interchange at Interstate 83, replacing the retired US 230 Bypass route. This was only temporary designation, however, as an interstate highway connector between the Pennsylvania Turnpike and Interstate 83 was being built. The new interstate was built parallel to Eisenhower Boulevard. When the highway opened in 1969, it was designated Interstate 283, and the PA 283 designation on Eisenhower Boulevard was deleted.^[4]

In 1971, construction began on highway connecting Harrisburg to Lancaster. In 1972, the highway was signed as PA 283; however, because state highways cannot be designated the same numbers as Interstate highways, the official, unsigned route number for the highway is SR 300. In 1987, when the Pennsylvania General Assembly passed a law reorganizing the Commonwealth's legislative and traffic routes into the Location Referencing System (LRS), Interstate 283 gained the LRS designation SR 0283, and Pennsylvania Route 283 gained the LRS designation SR 0300.

Exit list

County	Location	mi[1]	km	Destinations	Notes
Dauphin	Lower Swatara Township	0.000	0.000	To PA 230 (Eisenhower Boulevard)	At-grade intersection, westbound exit, eastbound entrance
		0.178	0.286	I-76 / Penna Turnpike – Philadelphia, Pittsburgh	I-76 / Penna Turnpike exit 247 (Harrisburg East)
		0.178	0.286	I-283 north – Harrisburg	I-283 exit 1A
		1.886– 1.896	3.035– 3.051	PA 441 south / SR 3032 (Airport Connector) – Harrisburg International Airport	Penn State Harrisburg
		2.940	4.731	To PA 441 (North Union Street / Fulling Mill Road)
	Londonderry Township	3.927	6.320	Middletown, Hummelstown	Access via Vine Street
		6.857	11.035	To PA 230 / PA 341 (Toll House Road)	West end of PA 341 Truck overlap eastbound
Lancaster	Mount Joy Township	11.714	18.852	PA 743 – Hershey, Elizabethtown	East end of PA 341 Truck overlap eastbound
		15.086	24.279	Rheems, Elizabethtown	Access via Cloverleaf Road
	Rapho Township	20.148	32.425	PA 772 – Manheim, Mount Joy
		21.339	34.342	Esbenshade Road	Eastbound exit, westbound entrance
		21.996	35.399	PA 230 – Mount Joy	Eastern terminus of PA 230, westbound exit, eastbound entrance
	East Hempfield Township	22.654	36.458	Salunga	Access via Spooky Nook Road
		25.506	41.048	PA 722 – Landisville	Western terminus of PA 722, continues westbound as State Road
		27.171	43.727	PA 741 – Millersville, East Petersburg
	Manheim Township	27.984	45.036	PA 72 (Manheim Pike)
	Lancaster	28.610	46.043	US 30 west – York	Eastbound exit, westbound entrance
		29.112	46.851	Fruitville Pike	Eastbound exit, westbound entrance
		29.112	46.851	US 30 east – Philadelphia	Eastbound exit, westbound entrance
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus       Incomplete access

See also

• U.S. Roads portal
• Pennsylvania portal
• Lancaster, Pennsylvania portal

References

Route map: Google

Wikimedia Commons has media related to Pennsylvania Route 283.