Meander

A hypothetical stream bed following a tilted valley. The maximum gradient is along the down-valley axis represented by a hypothetical straight channel. Meanders develop, which lengthen the course of the stream, decreasing the gradient.
Meanders of the Rio Cauto at Guamo Embarcadero, Cuba.

A meander, in general, is a bend in a sinuous watercourse or river. A meander forms when moving water in a stream erodes the outer banks and widens its valley, and the inner part of the river has less energy and deposits silt. A stream of any volume may assume a meandering course, alternately eroding sediments from the outside of a bend and depositing them on the inside. The result is a snaking pattern as the stream meanders back and forth across its down-valley axis. When a meander gets cut off from the main stream, an oxbow lake forms. Over time meanders migrate downstream, sometimes in such a short time as to create civil engineering problems for local municipalities attempting to maintain stable roads and bridges.

There is not yet full consistency or standardization of scientific terminology used to describe watercourses. A variety of symbols and schemes exist. Parameters based on mathematical formulae or numerical data vary as well, depending on the database used by the theorist. Unless otherwise defined in a specific scheme ‘meandering’ and ‘sinuosity’ here are synonymous and mean any repetitious pattern of bends, or waveforms. In some schemes, ‘meandering’ applies only to rivers with exaggerated circular loops or secondary meanders; that is, meanders on meanders.

Sinuosity is one of the channel types that a stream may assume over all or part of its course. All streams are sinuous at some time in their geologic history over some part of their length. The sinuosity of a meandering stream has a tendency to approach a critical state at which the opposing forces which create and cut off meanders interact in such a way that sinuosity fluctuates around a constant mean, regardless of the original conditions. [1]

Origin of term

The term derives from the Meander River located in present-day Turkey and known to the Ancient Greeks as Μαίανδρος Maiandros (Latin: Maeander),[2] characterised by a very convoluted path along the lower reach. As such, even in Classical Greece (and in later Greek thought) the name of the river had become a common noun meaning anything convoluted and winding, such as decorative patterns or speech and ideas, as well as the geomorphological feature.[3] Strabo said: ‘…its course is so exceedingly winding that everything winding is called meandering.’[4]

The Meander River is located south of Izmir, east of the ancient Greek town of Miletus, now Milet, Turkey. It flows through a graben in the Menderes Massif, but has a flood plain much wider than the meander zone in its lower reach. Its modern Turkish name is the Büyük Menderes River.

Governing physics

Straight channel culminating in a single bend

When a fluid is introduced to an initially straight channel which then bends, the sidewalls induce a pressure gradient that causes the fluid to alter course and follow the bend. From here, two opposing processes occur: (1) irrotational flow and (2) secondary flow. For a river to ‘meander’, secondary flow must dominate.

Irrotational flow: From Bernoulli's equations, high pressure results in low velocity. Therefore, in the absence of secondary flow we would expect low fluid velocity at the outside bend and high fluid velocity at the inside bend. This classic fluid mechanics result is irrotational vortex flow. In the context of meandering rivers, its effects are dominated by those of secondary flow.

Secondary flow: A force balance exists between pressure forces pointing to the inside bend of the river and centrifugal forces pointing to the outside bend of the river. In the context of meandering rivers, a boundary layer exists within the thin layer of fluid that interacts with the river bed. Inside that layer and following standard boundary-layer theory, the velocity of the fluid is effectively zero. Centrifugal force, which depends on velocity, is also therefore effectively zero. Pressure force, however, remains unaffected by the boundary layer. Therefore, within the boundary layer, pressure force dominates and fluid moves along the bottom of the river from the outside bend to the inside bend. This initiates helicoidal flow: Along the river bed, fluid roughly follows the curve of the channel but is also forced toward the inside bend; away from the river bed, fluid also roughly follows the curve of the channel but is forced, to some extent, from the inside to the outside bend. Ultimately, the downstream velocity of the fluid is convectively transported to the outside bend, resulting in higher velocities at the outside bend. This secondary flow effect dominates over that of irrotational flow: In real meandering rivers, we observe higher downstream fluid velocities at the outside bends.

The higher (lower) velocities at the outside (inside) bend result in higher (lower) sheer stresses and therefore results in erosion (deposition). Thus meander bends erode at the outside bend, causing the river to becoming increasingly sinuous (until cutoff events occur). Deposition at the inside bend occur such that for most natural meandering rivers, the river width remains nearly constant, even as the river evolves. [5]

Meander geometry

Uvac canyon meander, Serbia

The technical description of a meandering watercourse is termed meander geometry or meander planform geometry.[6] It is characterized as an irregular waveform. Ideal waveforms, such as a sine wave, are one line thick, but in the case of a stream the width must be taken into consideration. The bankfull width is the distance across the bed at an average cross-section at the full-stream level, typically estimated by the line of lowest vegetation.

As a waveform the meandering stream follows the down-valley axis, a straight line fitted to the curve such that the sum of all the amplitudes measured from it is zero. This axis represents the overall direction of the stream.

At any cross-section the flow is following the sinuous axis, the centerline of the bed. Two consecutive crossing points of sinuous and down-valley axes define a meander loop. The meander is two consecutive loops pointing in opposite transverse directions. The distance of one meander along the down-valley axis is the meander length or wavelength. The maximum distance from the down-valley axis to the sinuous axis of a loop is the meander width or amplitude. The course at that point is the apex.

In contrast to sine waves, the loops of a meandering stream are more nearly circular. The curvature varies from a maximum at the apex to zero at a crossing point (straight line), also called an inflection, because the curvature changes direction in that vicinity. The radius of the loop is the straight line perpendicular to the down-valley axis intersecting the sinuous axis at the apex. As the loop is not ideal, additional information is needed to characterize it. The orientation angle is the angle between sinuous axis and down-valley axis at any point on the sinuous axis.

Concave bank and convex bank, Great Ouse Relief Channel, England.

A loop at the apex has an outer or convex bank and an inner or concave bank. The meander belt is defined by an average meander width measured from outer bank to outer bank instead of from centerline to centerline. If there is a flood plain, it extends beyond the meander belt. The meander is then said to be free—it can be found anywhere in the flood plain. If there is no flood plain, the meanders are fixed.

Various mathematical formulae relate the variables of the meander geometry. As it turns out some numerical parameters can be established, which appear in the formulae. The waveform depends ultimately on the characteristics of the flow but the parameters are independent of it and apparently are caused by geologic factors. In general the meander length is 10-14 times, with an average 11 times, the fullbank channel width and 3 to 5 times, with an average of 4.7 times, the radius of curvature at the apex. This radius is 2-3 times the channel width.

Meander of the River Cuckmere in Southern England

A meander has a depth pattern as well. The cross-overs are marked by riffles, or shallow beds, while at the apices are pools. In a pool direction of flow is downward, scouring the bed material. The major volume, however, flows more slowly on the inside of the bend where, due to decreased velocity, it deposits sediment.

The line of maximum depth, or channel, is the thalweg or thalweg line. It is typically designated the borderline when rivers are used as political borders. The thalweg hugs the outer banks and returns to center over the riffles. The meander arc length is the distance along the thalweg over one meander. The river length is the length along the centerline.

Formation

Life history of a meander

Meander formation is a result of natural factors and processes. The waveform configuration of a stream is constantly changing. Fluid flows around a bend in a vortex.[7] Once a channel begins to follow a sinusoidal path, the amplitude and concavity of the loops increase dramatically due to the effect of helical flow sweeping dense eroded material towards the inside of the bend, and leaving the outside of the bend unprotected and therefore vulnerable to accelerated erosion, forming a positive feedback loop. In the words of Elizabeth A. Wood:[8]

‘…this process of making meanders seems to be a self-intensifying process…in which greater curvature results in more erosion of the bank, which results in greater curvature…’

The cross-current along the floor of the channel is part of the secondary flow and sweeps dense eroded material towards the inside of the bend.[9] The cross-current then rises to the surface near the inside and flows towards the outside, forming the helical flow. The greater the curvature of the bend, and the faster the flow, the stronger is the cross-current and the sweeping.[10]

Due to the conservation of angular momentum the speed on the inside of the bend is faster than on the outside.[11]

Since the flow velocity is diminished, so is the centrifugal pressure. However, the pressure of the super-elevated column prevails, developing an unbalanced gradient that moves water back across the bottom from the outside to the inside. The flow is supplied by a counter-flow across the surface from the inside to the outside.[12] This entire situation is very similar to the Tea leaf paradox.[13] This secondary flow carries sediment from the outside of the bend to the inside making the river more meandering.[14]

As to why streams of any size become sinuous in the first place, there are a number of theories, not necessarily mutually exclusive.

Stochastic theory

Meander scars, oxbow lakes and abandoned meanders in the broad flood plain of the Rio Negro, Argentina. 2010 astronaut photo from ISS.

The stochastic theory can take many forms but one of the most general statements is that of Scheidegger: ‘The meander train is assumed to be the result of the stochastic fluctuations of the direction of flow due to the random presence of direction-changing obstacles in the river path.’[15] Given a flat, smooth, tilted artificial surface, rainfall runs off it in sheets, but even in that case adhesion of water to the surface and cohesion of drops produce rivulets at random. Natural surfaces are rough and erodible to different degrees. The result of all the physical factors acting at random is channels that are not straight, which then progressively become sinuous. Even channels that appear straight have a sinuous thalweg that leads eventually to a sinuous channel.

Equilibrium theory

In the equilibrium theory, meanders decrease the stream gradient until an equilibrium between the erodibility of the terrain and the transport capacity of the stream is reached.[16] A mass of water descending must give up potential energy, which, given the same velocity at the end of the drop as at the beginning, is removed by interaction with the material of the stream bed. The shortest distance; that is, a straight channel, results in the highest energy per unit of length, disrupting the banks more, creating more sediment and aggrading the stream. The presence of meanders allows the stream to adjust the length to an equilibrium energy per unit length in which the stream carries away all the sediment that it produces.

Geomorphic and morphotectonic theory

Geomorphic refers to the surface structure of the terrain. Morphotectonic means having to do with the deeper, or tectonic (plate) structure of the rock. The features included under these categories are not random and guide streams into non-random paths. They are predictable obstacles that instigate meander formation by deflecting the stream. For example, the stream might be guided into a fault line (morphotectonic).

Associated landforms

The depositional slip-off slope is on the left whilst there is a small river cliff to the right. River Ashes Hollow, UK.

Slip-off slope

On the inside of a meander is a gentle slope of sedementation referred to as the slip-off slope. It is often marked by a point bar in the river.

River-cut cliff

On the outside of a meander the river cuts into the bank, often resulting in a river[-cut] cliff, also known as a cut bank, or a bluff.

Erosion mechanics

Most meanders occur in the region of a river channel with shallow gradients, a well-developed floodplain, and cohesive floodplain material. Deposition of sediment occurs on the inner edge, because the secondary flow of the river[17] sweeps and rolls sand, rocks and other submerged objects across the bed of the river towards the inside radius of the river bend, creating a point bar below the slip-off slope. Meandering morphology is dependent upon similar bank erosion and bar growth rates.[18] Erosion is greater on the outside of the bend where the soil is not protected by deposits of sand and rocks. The current on the outside bend is more effective in eroding the unprotected soil, and the inside bend receives steadily increasing deposits of sand and rocks, and the meander tends to grow in the direction of the outside bend, forming a small cliff called a cut bank. This can be seen in areas where willows grow on the banks of rivers; on the inside of meanders, willows are often far from the bank, whilst on the outside of the bend, the roots of the willows are often exposed and undercut, eventually leading the trees to fall into the river. This demonstrates the river's movement. Slumping usually occurs on the concave sides of the banks resulting in mass movements such as slides.

Deposits

Point bar

Point bars are simply an accumulation of deposited alluvium that collects on the inside bank of a meander curve. This accumulation occurs due to the stream's lower velocity in the interior portion of the curve. In accordance with the Hjulström curve, sediment will settle more readily at lower velocities. Point bars typically are composed of sediment ranging in size from pebbles to granular sands. Only in still water do silt particles settle.The development of point bars is suggested to depend upon a sufficient suspended load so that finer-grained sediments may be deposited on the inner bank.[19]

Incised meanders

If the slope of an established meandering stream is suddenly increased, it will resume downward erosion this happens when the base level of the stream is reduced, for example due to tectonic uplift of the region, a global fall in sea-level, collapse of a moraine-dammed lake downstream, or by capture of the stream by a steeper one. As the stream erodes downwards, its established meandering pattern will remain as a deep valley known as an incised meander or entrenched meander. Rivers in the Colorado Plateau, the Kentucky River Palisades in central Kentucky, and streams in the Ozark Plateau are noted for these incised meanders.

Goosenecks of the San Juan River, SE Utah. Note cut-off meander at right center.

Oxbow lakes

Oxbow lakes are created when growing meanders intersect each other and cut off a meander loop, leaving it without an active cutting stream. This process is usually linked to flooding where the river will tend to the path of least resistance.[20] The oxbow, being of much lower energy than the more direct path, collects more and more deposited sediment each season of flooding until it becomes independent from the river. The largest oxbow lakes will be in areas with wider flood plains where the rivers have more room to meander. Over a period of time, these oxbow lakes tend to dry out or fill in with sediments.

Abandoned meander (rincon)

The Rincon on Lake Powell in southern Utah

Sometimes an incised meander is cut off, similar to an oxbow lake. The resulting landform is known as an abandoned meander. In the southwest United States it is also known as a rincon. One dramatic example, on Lake Powell, USA, is called ‘The Rincon’.

Scroll-bars

Scroll-bars are a result of continuous lateral migration of a meander loop that creates an asymmetrical ridge and swale topography[21] on the inside of the bends. The topography is generally parallel to the meander, and is related to migrating bar forms and back bar chutes,[22] which carve sediment from the outside of the curve and deposit sediment in the slower flowing water on the inside of the loop, in a process called lateral accretion. Scroll-bar sediments are characterized by cross-bedding and a pattern of fining upward.[23] These characteristics are a result of the dynamic river system, where larger grains are transported during high energy flood events and then gradually die down, depositing smaller material with time (Batty 2006). Deposits for meandering rivers are generally homogeneous and laterally extensive unlike the more heterogeneous braided river deposits.[24] There are two distinct patterns of scroll-bar depositions; the eddy accretion scroll bar pattern and the point-bar scroll pattern. When looking down the river valley they can be distinguished because the point-bar scroll patterns are convex and the eddy accretion scroll bar patterns are concave.[25] Scroll bars often look lighter at the tops of the ridges and darker in the swales. This is because the tops can be shaped by wind, either adding fine grains or by keeping the area unvegetated, while the darkness in the swales can be attributed to silts and clays washing in during high water periods. This added sediment in addition to water that catches in the swales is in turn is a favorable environment for vegetation that will also accumulate in the swales.

Derived quantities

Meanders, scroll-bars and oxbow lakes in the Songhua River

The meander ratio[26] or sinuosity index[27] is a means of quantifying how much a river or stream meanders (how much its course deviates from the shortest possible path). It is calculated as the length of the stream divided by the length of the valley. A perfectly straight river would have a meander ratio of 1 (it would be the same length as its valley), while the higher this ratio is above 1, the more the river meanders.

Sinuosity indices are calculated from the map or from an aerial photograph measured over a distance called the reach, which should be at least 20 times the average fullbank channel width. The length of the stream is measured by channel, or thalweg, length over the reach, while the bottom value of the ratio is the downvalley length or air distance of the stream between two points on it defining the reach.

The sinuosity index plays a part in mathematical descriptions of streams. The index may require elaboration, because the valley may meander as well—i.e., the downvalley length is not identical to the reach. In that case the valley index is the meander ratio of the valley while the channel index is the meander ratio of the channel. The channel sinuosity index is the channel length divided by the valley length and the standard sinuosity index is the channel index divided by the valley index. Distinctions may become even more subtle.[28]

Sinuosity Index has a non-mathematical utility as well. Streams can be placed in categories arranged by it; for example, when the index is between 1 and 1.5 the river is sinuous, but if between 1.5 and 4, then meandering. The index is a measure also of stream velocity and sediment load, those quantities being maximized at an index of 1 (straight).

See also

References and notes

  1. "Current Links for doi: 10.1130/0016-7606(1998)1102.3.CO;2". Geological Society of America Bulletin. 110: 1485. doi:10.1130/0016-7606(1998)110<1485:pgadom>2.3.co;2.
  2. "Meander". Merriam-Webster. Retrieved July 12, 2012.
  3. "Meander". Online Etymology Dictionary. Retrieved July 12, 2012.
  4. Strabo, Geography, Book 12 Chapter 8 Section 15.
  5. Weiss, Samantha Freeman. (April 2016). Meandering River Dynamics (Doctoral dissertation). Retrieved from Ideals. https://www.ideals.illinois.edu/bitstream/handle/2142/92706/WEISS-DISSERTATION-2016.pdf?sequence=1&isAllowed=y
  6. The technical definitions of this section rely heavily on Julien, Pierre Y. (2002). River Mechanics. Cambridge University press. pp. 179–184. ISBN 0-521-52970-0. In addition concepts are utilized from Graf, Walter (1984). Hydraulics of Sediment Transport. Water Resources Publications. pp. 261–265. ISBN 0-918334-56-X.
  7. Lewalle, Jacques (2006). "Flow Separation and Secondary Flow: Section 9.1". Lecture Notes in Incompressible Fluid Dynamics: Phenomenology, Concepts and Analytical Tools (PDF). Syracuse, NY: Syracuse University..
  8. Wood, Elizabeth A. (1975). Science from Your Airplane Window: 2nd Revised Edition. New York: Courier Dover Publications. p. 45. ISBN 0-486-23205-0.
  9. Hickin 2003, p. 432. One of the important consequences of helical flow in meanders is that sediment eroded from the outside of a meander bend tends to move to the inner bank or point bar of the next downstream bend.
  10. Hickin 2003, p. 434.
  11. Hickin 2003, p. 432. "In the absence of secondary flow, bend flow seeks to conserve angular momentum so that it tends to conform to that of a free vortex with high velocity at the smaller radius of the inner bank and lower velocity at the outer bank where radial acceleration is lower."
  12. Hickin 2003, p. 432. "Near the bed, where velocity and thus the centrifugal effects are lowest, the balance of forces is dominated by the inward hydraulic gradient of the super-elevated water surface and secondary flow moves toward the inner bank."
  13. Bowker, Kent A. (1988). "Albert Einstein and Meandering Rivers". Earth Science History. 1 (1). Retrieved 2016-07-01.
  14. Callander, R.A. (1978). "River Meandering". Annual Review of Fluid Mechanics. 10: 129–58. doi:10.1146/annurev.fl.10.010178.001021.
  15. Scheidegger, Adrien E. (2004). Morphotectonics. Berlin, New York: Springer. p. 113. ISBN 3-540-20017-7.
  16. Riley, Ann L. (1998). Restoring Streams in Cities: A Guide for Planners, Policymakers and Citizens. Washington DC: Island Press. p. 137. ISBN 1-55963-042-6.
  17. Chant, Robert J. (2002). "Secondary circulation in a region of flow curvature: Relationship with tidal forcing and river discharge". Journal of Geophysical Research. 107. Bibcode:2002JGRC..107.3131C. doi:10.1029/2001jc001082.
  18. Braudrick, Christian A.; Dietrich, William E.; Leverich, Glen T.; Sklar, Leonard S. (2009-10-06). "Experimental evidence for the conditions necessary to sustain meandering in coarse-bedded rivers". Proceedings of the National Academy of Sciences. 106 (40): 16936–16941. ISSN 0027-8424. PMC 2761352Freely accessible. PMID 19805077. doi:10.1073/pnas.0909417106.
  19. Braudrick, Christian A.; Dietrich, William E.; Leverich, Glen T.; Sklar, Leonard S. (2009-10-06). "Experimental evidence for the conditions necessary to sustain meandering in coarse-bedded rivers". Proceedings of the National Academy of Sciences. 106 (40): 16936–16941. ISSN 0027-8424. PMC 2761352Freely accessible. PMID 19805077. doi:10.1073/pnas.0909417106.
  20. Brower, Lincoln P "The Flooding river a study in riverine ecology," 1972.
  21. Woolfe and Purdon; Purdon, Richard (1996). "Deposits of a rapidly eroding meandering river: terrace cut and fill in the Taupo Volcanic Zone". New Zealand Journal of Geology and Geophysics. 39 (2): 243–249. doi:10.1080/00288306.1996.9514708.
  22. K. Whipple (September 2004). "Alluvial channels and their landforms". Surface Processes and Landscape Evolution.
  23. Sam Boggs, Jr. (2003). Principles of Sedimentology and Stratigraphy (4 ed.). NJ: Pearson Prentice Hall. ISBN 0-13-099696-3.
  24. G. Wasser (2005). "A Comparison Of Meandering River Deposits From The Middle Belly River And Horsefly With Recent Milk River Valley Deposits; Central And Southern Alberta". Calgary, Alberta: Canadian Natural Resource Limited.
  25. Norman D. Smith and John Rogers (1999). Fluvial Sedimentology (6 ed.). blackwell publishing. ISBN 0-632-05354-2.
  26. Shaw, Lewis C. (1984). Pennsylvania Gazetteer of Streams Part II. Bulletin No. 16. Commonwealth of Pennsylvania, Department of Environmental Resources. p. 8. OCLC 17150333.
  27. Gordon, Nancy D.; Thomas A. McMahon; Christopher J. Gippel; Rory J. Nathan (2005). Stream Hydrology: an Introduction for Ecologists: Second Edition. John Wiley and Sons. pp. 183–184. ISBN 0-470-84357-8.
  28. Singh, R.Y. (2005). "Interface drainage analysis of a water divide". In Jansky, Libor; Haigh, Martin J.; Prasad, Hushila. Sustainable Management of Headwater Resources: Research from Africa and India. Tokyo, New York: United Nations University Press. pp. 87–106. ISBN 92-808-1108-8.

Bibliography

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.