Oilcloth

Traditional Oilcloth

Oilcloth, also known as enameled cloth or (in England) American cloth, was close-woven cotton duck or linen cloth with a coating of boiled linseed oil to make it waterproof. Historically, pre-Mackintosh, oilcloth was one of very few flexible, waterproof materials that were widely available. Leather was expensive—very expensive in large pieces—and required regular maintenance if often wetted. Oilcloth was used as an outer waterproof layer for luggage, both wooden trunks[1] and flexible satchels, for carriages and for weatherproof clothing.[2]

Manufacture

Boiled linseed oil was prepared by a long boiling of linseed oil with metal salts, originally lead dross.[2] The modern oil is less toxic, but also less suitable for making oilcloth. Re-enactors may boil their own oil in the search for a correctly coloured oilcloth.[2][3] Oilcloth used for weatherproofing may have used a mixture of lead and manganese salts, the sienna and umber pigments, to give a more humidity-resistant cure.[2]

The fabric was first stretched on a tenter frame and sized with animal gelatine. The oil was then applied and allowed to cure between coats. As the cure relies on oxidation by the air, thin coats and long cure times between are required.[2][3]

Overlaps between sheets of fresh oilcloth would amalgamate naturally when pressed together. This tendency also led to the cloth sticking together when folded. Where a folding cover was needed, the cloth was waxed or dusted with pumice to reduce this.

Seams in traditional oilcloth could be coated after sewing to reduce leakage through their stitching. This was generally unsatisfactory for clothing though and so overcoats of this era would incorporate one or more short capes over the shoulders. These capes were made in one piece and covered the inevitable shoulder seams in the main garment. These capes remain today in garments such as the Ulster and Inverness.

In the 19th century, waxed cotton developed and began to gradually replace oilcloth, especially for clothing.

In the mid 20th century the term "oilcloth" was often used as a misnomer for linoleum.

Applications

The most familiar recent use was for brightly printed kitchen tablecloths. Dull-colored oilcloth was used for bedrolls, sou'westers, and tents. By the late 1950s, oilcloth became a synonym for vinyl (polyvinyl chloride) bonded to either a flanneled cloth or a printed vinyl with a synthetic non-woven backing.

See also

References

  1. ↑ "Silversmith's small chest". 2003.
  2. 1 2 3 4 5 Knight, William A.; Mende, William R. (2000). Staining and Finishing for Muzzleloading Gun Builders. privately published. Archived from the original on 2013-05-30.
  3. 1 2 "Recreating old techniques for boiled linseed oil and oilcloth". 2003.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.