Ocean surface topography

TOPEX/Poseidon was the first space mission that allowed scientists to map ocean topography with sufficient accuracy to study the large-scale current systems of the world's ocean. Although this image was constructed from only 10 days of TOPEX/Poseidon data (October 3 to October 12, 1992), it reveals most of the current systems that have been identified by shipboard observations collected over the last 100 years.

The ocean surface has highs and lows, similar to the hills and valleys of Earth's land surface depicted on a topographic map. These variations, called ocean surface topography (or sea surface topography), also dynamic topography, are mapped using direct (usually satellite-based) or indirect measurements of sea surface height relative to Earth's geoid. Earth's geoid is a calculated surface of equal gravitational potential energy and represents the shape the sea surface would be if the ocean were not in motion. The main purpose of measuring ocean surface topography is to understand the large-scale circulation of the ocean.

On a daily basis, SSH is most obviously affected by the tidal forces of the Moon and the Sun acting on the Earth. Over longer timescales, SSH is influenced by ocean circulation. Typically, SSH anomalies resulting from these forces differ from the mean by less than ±1 m (3 ft) at the global scale.[1] Other influences include temperature, salinity, tides, waves, and the loading of atmospheric pressure. The slowest and largest variations are due to changes in the Earth's gravitational field (geoid) due to the rearrangement of continents, formation of sea mounts and other redistribution of rock.

Since the Earth's gravitational field is relatively stable on decadal to centennial timescales, ocean circulation plays a more significant role in the observed variation of SSH. Across the seasonal cycle changes in patterns of warming, cooling and surface wind forcing affect circulation and influence SSH. Variations in SSH can be measured by satellite altimetry (e.g. TOPEX/Poseidon) and used to calculate determine sea level rise and properties such as ocean heat storage.

Applications

Ocean surface topography is used to map ocean currents, which move around the ocean's "hills" and "valleys" in predictable ways. A clockwise sense of rotation is found around "hills" in the northern hemisphere and "valleys" in the southern hemisphere. This is because of the Coriolis effect. Conversely, a counterclockwise sense of rotation is found around "valleys" in the northern hemisphere and "hills" in the southern hemisphere.[2]

Ocean surface topography is also used to understand how the ocean moves heat around the globe, a critical component of Earth's climate, and for monitoring changes in global sea level. The sea surface height (SSH)[3] is calculated through altimetry satellites, which determine the distance from the satellite to a target surface by measuring the satellite-to-surface round-trip time of a radar pulse.[4] The satellites then measure the distance between their orbit altitude and the surface of the water. Due to the differing depths of the ocean, an approximation is made. This is called the Arbitrary Reference Surface. Arbitrary Reference Surface is an estimated surface that is calculated to factor in the shape of the Earth. The general shape of the earth is spherical, but flattened out at the North and South Pole. This approximated surface is called the reference ellipsoid. This enables data to be taken precisely due to the uniform surface level. The satellite’s altitude then has to be calculated with respect to the reference ellipsoid. It is calculated using the orbital parameters of the satellite and various positioning instruments. The sea surface height is then the difference between the satellite’s altitude relative to the reference ellipsoid and the altimeter range. The satellite sends microwave pulses to the ocean surface. The travel time of the pulses ascending to the oceans surface and back provides data of the sea surface height. In the image below you can see the measurement system using by the satellite Jason-1.[5]

Jason-1 maps global ocean surface topography every 10 days.

Data collection purposes

The collection of the data is useful for the long-term information about the ocean and its currents. According to NASA science this data can also be used to provide understanding of weather, climate, navigation, fisheries management, and offshore operations. Observations made about the data are used to study the oceans tides, circulation, and the amount of heat the ocean contains. These observations can help predict short and long term effects of the weather and the earth’s climate over time.[6]

Satellites

Currently there are two different satellites calculating the earth ocean topography, Jason-1, and Jason-2. These two satellites are currently both in space orbiting Earth in a tandem rotation. They are approximately 330 kilometers apart.

Ocean surface topography can be derived from ship-going measurements of temperature and salinity at depth. However, since 1992, a series of satellite altimetry missions, beginning with TOPEX/Poseidon and continued with Jason-1 and the Ocean Surface Topography Mission on the Jason-2 satellite have measured sea surface height directly. By combining these measurements with gravity measurements from NASA's Grace mission, scientists can determine sea surface topography to within a few centimeters.

Jason-1 was launched by a Boeing Delta II rocket in California in 2001 and continued measurements initially collected by TOPEX/Poseidon satellite, which orbited from 1992 up until 2006.[7] NASA and CNES, a French space agency, are joint partners in this mission.

The main objectives of the Jason-1 satellite is to collect data on the average ocean circulation around the globe in order to better understand its interaction with the time varying components and the involved mechanisms for initializing ocean models. To monitor the low frequency ocean variability and observe the season cycles and inter-annual variations like El Nino and La Nina, the North Atlantic oscillation, the pacific decadal oscillation, and planetary waves crossing the oceans over a period of months, then they will be modeled over a long period of time due to the precise altimetric observations.[8] It aims to contribute to observations of the mesoscale ocean variability, affecting the whole oceans. This activity is especially intense near western boundary currents. Also monitor the average sea level because it is a large indicator of global warming through the sea level data. Improvement of tide modeling by observing more long period components such as costal interactions, internal waves, and tidal energy dissipation. Finally the satellite data will supply knowledge to support other types of marine meteorology which is the scientific study of the atmosphere.

Jason-2 was launched on June 20, 2008 by a Delta-2 rocket out of the California site in Vandenberg. Its current mission is to transfer the current data into a second decade of data collection on the ocean height. The long-term objectives of the Jason-2 satellite were to provide global descriptions of the seasonal and yearly changes of the circulation and heat storage in the ocean.[9] This includes the study of short-term climatic changes such as El Nino, La Nina. The satellites detect global sea level mean and record the fluctuations. Also detecting the slow change of upper ocean circulation on decadal time scales, every ten years. Studying the transportation of heat and carbon in the ocean and examining the main components that fuel deep water tides. The satellites data collection also helps improve wind speed and height measurements in current time and for long term studies. Lastly improving our knowledge about the marine geoid.[10] The first seven months Jason-2 was put into use it was flown in extreme close proximity to Jason-1. Only being one minute apart from each other the satellites observed the same area of the ocean. The reason for the close proximity in observation was for cross-calibration. This was meant to calculate any bias in the two altimeters. This multiple month observation proved that there was no bias in the data and both collections of data were consistent.[11]

A new satellite mission called the Surface Water Ocean Topography Mission has been proposed to make the first global survey of the topography of all of Earth's surface water—the ocean, lakes and rivers. This study is aimed to provide a comprehensive view of Earth’s freshwater bodies from space and more much detailed measurements of the ocean surface than ever before.[12]

Organizations

The Ocean Surface Topography Mission is a combined effort from four different organizations with one mutual focus; measure sea surface height. The four contributing organizations are National Aeronautics and Space Administration (NASA), France’s Centre National d’Etudes Spatiales (CNES), National Oceanographic and Atmospheric Administration (NOAA), and European Meteorological Satellite Organisation (EUMETSAT).[13]

See also

References

  1. ↑ Stewart, R.H. (September 2008). Introduction To Physical Oceanography (PDF).
  2. ↑ "Ocean Surface Topography from Space". NASA/JPL.
  3. ↑ "Statistics of spatial-temporal variations of sea surface height based on Topex altimeter measurements". NASA. Roman Glazman, A. Fabrikant, A.M. Greysukh, 1996
  4. ↑ Chelton, D.B., J.C. Ries, B.J. Haines, L.L. Fu, P.S. Callahan, Satellite Altimetry, Satellite altimetry and Earth sciences, L.L. Fu and A. Cazenave Ed., Academic Press, 2001.
  5. ↑ "Correcting to Improve Accuracy - CNES." Correcting to Improve Accuracy - CNES. Retrieved from http://www.cnes.fr/web/CNES-en/3773-about-cnes.php
  6. ↑ "OSTM/Jason-2." OSTM/Jason-2. Ed. Jim Wilson. NASA, n.d. Last Edited. 18 Apr. 2015
  7. ↑ Ménard, Y., Fu, L., Escudier, P., Parisot, F., Perbos, J., Vincent, P., & ... Kunstmann, G. (2003). The Jason-1 Mission. Marine Geodesy, Volume 26 Issue 3/4, 131-146.
  8. ↑ Ménard, Y., Fu, L., Escudier, P., Parisot, F., Perbos, J., Vincent, P., & ... Kunstmann, G. (2003). The Jason-1 Mission. Marine Geodesy, Volume 26 Issue 3/4, 131-146.
  9. ↑ Lambin, J., Morrow, R., Lee-Lueng, F., Willis, J. K., Bonekamp, H., Lillibridge, J., & ... Mignogno, M. (2010). The OSTM/Jason-2 Mission. Marine Geodesy, Volume 33 p4-25.
  10. ↑ Lambin, J., Morrow, R., Lee-Lueng, F., Willis, J. K., Bonekamp, H., Lillibridge, J., & ... Mignogno, M. (2010). The OSTM/Jason-2 Mission. Marine Geodesy, Volume 33 p4-25.
  11. ↑ Lambin, J., Morrow, R., Lee-Lueng, F., Willis, J. K., Bonekamp, H., Lillibridge, J., & ... Mignogno, M. (2010). The OSTM/Jason-2 Mission. Marine Geodesy, Volume 33 p4-25.
  12. ↑ "Following the Water with the Ocean Surface Topography Mission".
  13. ↑ "Ocean Surface Topography - NASA Science." Ocean Surface Topography - NASA Science. Retrieved from https://science.nasa.gov/earth-science/oceanography/physical-ocean/ocean-surface-topography


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.