Norton Isolastic frame

1969 750 cc Norton Commando 'Fastback'
1973 850 cc Norton Commando with US-spec small fuel tank[1]

The isolastic frame, designated by Norton as GlideRide,[2] used a system of engine-to-frame mountings incorporating rubber bushes to isolate the vibration of the vertical twin engine from the frame and rider. The isolastic frame was developed for use with the Commando inclined engine, whilst the Featherbed frame continued in production for the Mercury with a softer-specification 650 cc vertical-engine until 1970.[3][4][5]

History

Following the collapse of the old Norton parent-company AMC in 1966, a new business was structured to produce motorcycles using the name Norton Matchless Division, under a new parent company name of Norton Villiers Ltd.[2]

Part of the changes involved creating a new design frame produced as previously by Reynolds Tubes in Tyseley, Birmingham, England, where the traditional Featherbed frame had been produced since the 1950s, shipped for assembly at the Matchless works in Woolwich, London.[6]

In an attempt to reduce the worsening problem of engine vibration being transmitted through the frame, as the capacity of the engine increased to 750cc with the Norton Atlas, Norton Villiers decided to replace the Featherbed frame for their top model, and the Norton Commando was the result, although Norton-Matchless machines like the P11 continued to use conventional Matchless frames.

The innovative new design isolastic frame made it smoother through the use of rubber bushes to isolate the engine and swingarm from the frame, forks, and rider. As the rubber bushes deteriorated, however, the bike became prone to fishtailing in high-speed turns.[7] Earlier models therefore required careful maintenance and adjustment of the clearance between frame and mounts using shims.

Several improvements were made in 1969. The frame benefitted from additional stiffening and strengthening,[8] which, together with an improved centre-stand, helped to improve ground-clearance which had been criticised. Slightly softer rubber mountings were introduced to reduce a vibration period at 1,500 to 1,900 rpm. A new model named Commando S was introduced with alternative styling having a different tank, mudguards and high-level exhausts.[9][4]

The six-storey former Matchless factory at Woolwich closed on 25 July 1969, and production was transferred to a new, small, modern facility at Andover, Hampshire,[6] when the range was expanded to five Commando variants—Fastback, Roadster SS, Production racer and Hi-Rider, all having "Isolastic Construction—Norton's revolutionary answer to vibration".

By 1971, the company name had changed again to Norton Villiers Europe Ltd.[10] By 1973, a variant on the Roadster was introduced named Interstate, with larger 5 3⁄4-gallon (27 litre) fuel tank replacing the original US-specification 2 1⁄2 gallon (18 litre) capacity.[1] By 1974 the company name had changed yet again, to Norton Triumph Europe Limited.[11]

References

  1. 1 2 Motorcycle Mechanics, June 1973, p.2 Full-page colour Norton factory advert. "Commando Roadster with 2 1⁄2 gallon (18 litre) steel petrol tank...also available Commando Interstate, with larger 5 3⁄4-gallon (27 litre) long distance steel petrol tank". Accessed 3 January 2016
  2. 1 2 Grand Prix, 1968 soft-back book, p.34, full-page B&W factory advert, a Motor Cycle News special publication. "Suddenly we've started a revolution on two wheels - It's called the COMMANDO 750. Inclined engine, better cooling. GlideRide frame—goodbye vibration" Accessed 1 January 2016
  3. ↑ Motorcycle Mechanics, May 1969, p.63 SHOWTIME. Show scene '69."Last of the traditional Nortons is the 647 cc Mercury. This machine has the Commando type cylinder head and single carburettor, producing 47 bhp. A rev counter and stainless steel mudguards are available as extras". Accessed 3 January 2016
  4. 1 2 Motorcycle Sport, April 1969, p.126, p.133, p.135 Accessed 1 January 2016
  5. ↑ Norton By Mick Woollett. 2004.
  6. 1 2 Motorcycle Sport, July 1971, pp.273-274, "When motorcycles were made in London". Accessed 2 January 2016
  7. ↑ Bacon, Roy (1990). Norton Commando. Niton Publishing. ISBN 1-85648-310-X.
  8. ↑ Motorcycle Mechanics, May 1969, p.63 SHOWTIME. Show scene '69."The Norton Commando will appear with a slightly strengthened and consequently more rigid frame for 1969". Accessed 3 January 2016
  9. ↑ Motorcycle Mechanics, May 1969, p.63 SHOWTIME. Show scene '69."Seen for the first time at the Brighton show will be the Commando 'S' restyled to a more sporting specification, resulting in improved performance". Accessed 3 January 2016
  10. ↑ Motorcycle Sport, July 1971, p.257, "64 years ahead". (1907 first TT win to 1971) Full-page factory advert, Norton Villiers Europe Ltd, Andover, Hants. Accessed 2 January 2016
  11. ↑ Motorcycle Mechanics, December 1974, p.2 Full-page colour Norton Triumph factory advert. "Buy British. You've arrived.". Accessed 3 January 2016
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.