North Carolina Highway 481

North Carolina Highway 481 marker

North Carolina Highway 481
Route information
Maintained by NCDOT
Length: 21.0 mi[1] (33.8 km)
Existed: 1937 – present
Major junctions
West end: NC 4 / NC 48 in Glenview
  I‑95 near Glenview
US 301 near Enfield
East end: NC 561 in Tillery
Location
Counties: Halifax
Highway system
← NC 461I‑485 →

North Carolina Highway 481 (NC 481) is a primary state highway in the U.S. state of North Carolina. It serves to connect Enfield to nearby Interstate 95 (I-95) and the surrounding farmlands of southern Halifax County.

Route description

NC 481 is a two-lane rural highway that operates more of a farm-to-market route than a to any other destination besides Enfield. The highway begins at an intersection with NC 4/NC 48 in the community of Glenview, then proceeds east, quickly connecting with I-95 along the way. Near Enfield, NC 481 Business goes straight into the downtown area, while NC 481 meets-up with U.S. Route 301 (US 301) first before entering the town. After its tour through the town, it splits with US 301 north of Enfield and continues in a northeasterly direction. After connecting with NC 125/NC 903, it ends at NC 561 in the community of Tillery and near the banks of the Roanoke River.

History

NC 481 made three brief appearances before the current routing that exists today. The first NC 481 appeared in 1925 as a new primary routing from NC 48 in Roanoke Rapids, to NC 40 in Pleasant Hill. In 1926, NC 40 was rerouted and replaced all of the first NC 481; which quickly lead to the second establishment of NC 481, replacing an old alignment of NC 40 from Garysburg to Pleasant Hill. In 1930, NC 40 and NC 481 switched routes again, ending the second and the start of the third, from NC 48 in Roanoke Rapids, to NC 40 in Pleasant Hill.[2] In 1932, the third NC 481 was renumbered as NC 40A.

The fourth and current NC 48 was established in 1937 as a new primary routing from NC 48 in Glenview to NC 561 in Tillery.[3] In 2007, NC 481 was rerouted south of Enfield to US 301 before traveling back through town; the old alignment became NC 481 Business.[4]

Junction list

The entire route is in Halifax County.

Locationmi[1]kmDestinationsNotes
Glenview0.00.0 NC 4 / NC 48 – Rocky Mount, Roanoke Rapids
​2.64.2 I‑95 – Rocky Mount, Roanoke Rapids
​6.911.1
NC 481 Bus. east – Enfield
​8.012.9 US 301 south – Rocky MountSouth end of US 301 overlap
Enfield9.315.0
NC 481 Bus. west (Whitaker Street)
​11.117.9 US 301 north – HalifaxNorth end of US 301 overlap
​16.326.2 NC 125 / NC 903 – Scotland Neck, Halifax
Tillery21.033.8 NC 561 – Rich Square, Halifax
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Special routes

Enfield business loop


North Carolina Highway 481 Business
Location: Enfield, North Carolina
Length: 1.7 mi[5] (2.7 km)
Existed: 2007–present

North Carolina Highway 481 Business (NC 481 Bus) was established in 2007, when NC 481 was rerouted onto new bypass south onto US 301. The business loop travels along Glenview Road, Whitfield Street and Whitaker Street.[4]

References

  1. 1 2 Google (May 13, 2014). "North Carolina Highway 481" (Map). Google Maps. Google. Retrieved May 13, 2014.
  2. ↑ State Highway System of North Carolina (PDF) (Map). Cartography by NCDOT. North Carolina Department of Transportation. 1930. Retrieved May 14, 2014.
  3. ↑ North Carolina Primary Highway System (PDF) (Map). Cartography by NCDOT. North Carolina Department of Transportation. 1940. Retrieved May 14, 2014.
  4. 1 2 "Route Change (2007-06-19)" (PDF). North Carolina Department of Transportation. June 19, 2007. Retrieved May 13, 2014.
  5. ↑ Google (May 13, 2014). "NC 481 Business - Enfield, North Carolina" (Map). Google Maps. Google. Retrieved May 13, 2014.
KML is from Wikidata
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.