COMPASS experiment

Super Proton Synchrotron
(SPS)
Key SPS Experiments
UA1 Underground Area 1
UA2 Underground Area 2
NA31 NA31 Experiment
NA32 Investigation of Charm Production in Hadronic Interactions Using High-Resolution Silicon Detectors
COMPASS Common Muon and Proton Apparatus for Structure and Spectroscopy
SHINE SPS Heavy Ion and Neutrino Experiment
NA62 NA62 Experiment
SPS preaccelerators
p and Pb Linear accelerators for protons (Linac 2) and Lead (Linac 3)
(not marked) Proton Synchrotron Booster
PS Proton Synchrotron
COMPASS experiment logo

The NA58 experiment, or COMPASS (standing for "Common Muon and Proton Apparatus for Structure and Spectroscopy") is a 60-metre-long fixed-target experiment at the M2 beam line of the SPS at CERN. The experimental hall is located at the CERN North Area, close to the French village of Prévessin-Moëns. The experiment is a two-staged spectrometer with numerous tracking detectors, particle identification and calorimetry. The physics results are extracted by recording and analysing the final states of the scattering processes. The versatile set-up, the use of different targets and particle beams allow the investigation of various processes. The main physics goals are the investigation of the nucleon spin structure and hadron spectroscopy. The collaboration consists of 220 physicists from 13 different countries, involving 28 universities and research institutes.

History and physics goals

The COMPASS experiment was proposed in 1996 and approved by the CERN research committee. Between 1999 and 2001, the experiment was set up and finally in 2001, the first commissioning run was performed. Until the start of the LHC experiments, COMPASS was the largest data-taking experiment at CERN. It is also a pioneer in adopting new detector and readout technologies, such as MicroMegas, GEM detectors and most recently THGEM photon detection. The data taking is divided into the COMPASS I and II phases.

COMPASS I (2002-2011)

COMPASS II (2012-2018)

Experimental Apparatus

The experiment consists of three major parts: the beam telescope, the target area and the two-staged spectrometer.

Particle beam

The M2 beam line is able to produce various particle beams, which all originate from the Super Proton Synchrotron. The primary proton beam (400 GeV and roughly 2E13 protons per super cycle) is steered on a beryllium production target producing secondary hadrons, mainly consisting of (anti-) protons, pions and kaons. The production target and the experiment are separated by a 1.1 kilometres long transfer line, allowing, through the weak decay and the use of massive hadron absorbers, the production of a naturally spin-polarised muon beam. In total, five different beams are used by COMPASS:

In all cases, the beam is steered with dipole magnets and focused with quadrupole magnets to reached the desired position and beam spot size in the experiment.

Beam telescope

The timing and the position of the incident particles are determined with cold silicon strip detectors and scintillating fibre detectors. These informations are crucial to determine the interaction point inside the target material. Depending on the beam type, modifications in the beam telescope are done:

Target

According to the physics goal, a suitable target is needed. For polarised physics, the spins of the target material need to be oriented in one direction. The target cell contains either ammonium or deuterium, which are polarised by the means of microwave radiation and strong magnetic fields. To keep up the polarisation grade, a 3He/4He dilution refrigerator is used to cool down the target material to 50 mK. The target material can be polarised longitudinal or transverse to the beam axis.

For unpolarised physics, mostly liquid hydrogen is used, allowing to study the proton properties. For other physics, where high atomic numbers are needed, nickel, lead and other nuclear targets are used.

The main advantage of a fixed target experiment is the large acceptance. Due to the Lorentz boost, most of the final states and the scattered particles are created along the beam axis. This leads to the distinctive set-up of a fixed-target experiment: most detectors are placed behind the target ("forward spectrometer"). For some processes it is necessary to detect the recoil nucleon from the target. Here, a recoil proton detector consisting of two barrels of scintillator material is used. The protons are identified by the time of flight and the energy loss.

Spectrometer

The COMPASS experiment consists of two spectrometer stages with various tracking detector types, each set-up around a spectrometer magnet to determine the momentum of the particles. The first stage is dedicated to tracks with large scattering (production) angles and the second one for small angles. In addition, the first stage holds a Ring-Imaging CHerenkov detector ("RICH"), able to distinguish pions and kaons between 10 and 50 GeV. The following detector types for measuring charged particles are used:

Neutral particles, i.e. photons are detected with electro-magnetic calorimeters. The energy of produced hadrons are determined with hadronic calorimeters.

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.