Mount Barker Junction railway station
Mount Barker Junction | |
|---|---|
| Coordinates | 35°01′27″S 138°51′33″E / 35.02417°S 138.85914°ECoordinates: 35°01′27″S 138°51′33″E / 35.02417°S 138.85914°E |
| Operated by | SteamRanger |
| Line(s) |
Adelaide-Wolseley Victor Harbor |
| Distance | 50.00 kilometres from Adelaide |
| Platforms | 1 |
| Tracks | 3 |
| Construction | |
| Structure type | Ground |
| Other information | |
| Status | Closed |
| History | |
| Opened | 1883 |
Mount Barker Junction railway station is a disused station on the Adelaide to Wolseley line serving the South Australian city of Mount Barker.[1]
History
Mount Barker Junction station opened in 1883, and consisted of a main platform with a timber station building identical to the one at Balhannah, with a tall signal box next to the building. An island platform was built as well. The timber building and signal box were replaced with the current brick building in 1943. The island platform was demolished around the time the station closed to passengers by 1984 when the passenger service to Victor Harbor ceased.
It became a junction station when the Victor Harbor line opened. When the Adelaide-Wolseley line was gauge converted to standard gauge in 1995, the Victor Harbor line was isolated from the rest of the Australian National network.
SteamRanger relocated from Dry Creek to Mount Barker, and runs broad gauge services south on the line from Mount Barker station.[2] Until 2005, SteamRanger ran a Junction Jogger service from Mount Barker station to this location, but ceased probably due to a worn-out track along this section.[3]
References
- ↑ Balhannah - Mount Barker track diagram SA Track & Signal
- ↑ A Short History of the SteamRanger Heritage Railway SteamRanger
- ↑ Mount Barker Junction SteamRanger
External links
| Preceding station | South Australian Railways | Following station | ||
|---|---|---|---|---|
toward Adelaide | Melbourne–Adelaide railway | toward Serviceton |
||
| Victor Harbor railway line | toward Victor Harbor |