Domodossola–Milan railway

Domodossola–Milan railway
Simplon Tunnel at the northern end of the line.
Overview
Status	Operational
Locale	Italy
Termini	Domodossola Milan
Operation
Owner	RFI
Operator(s)	Trenitalia, Trenord
Technical
Line length	153 km (95 mi)
Track gauge	1,435 mm (4 ft 8 1⁄2 in) standard gauge
Electrification	Electrified at 3000 V DC
Route map from Brig 55.547 Domodossola to Novara 50.246 Beura-Cardezza Domo II 47.672 Bivio/P.C. Valle 46.612 Vogogna Ossola 40.016 Premosello 36.329 Cuzzago 31.766 Candoglia-Ornavasso 29.291 Mergozzo 26.074 Verbania-Pallanza 21.144 Baveno 17.339 Stresa to Mottarone Stresa (1072 m) 11.160 Belgirate 8.921 Lesa 4.854 Meina Faraggiana (1183 m) 0.000 50.428 Arona to Santhià and to Novara 46.400 Dormelletto from Oleggio Ticino River 39.367 Sesto Calende to Luino Autostrada A8/A26—European route E62 36.333 Vergiate 32.410 Somma Lombardo 29.676 Casorate Sempione from Luino and from Porto Ceresio 24.922 Gallarate 17.821 Busto Arsizio FNM Saronno-Novara line 13.253 Legnano 10.259 Canegrate 7.826 Parabiago 2.935 Vanzago-Pogliano 0.000 133.381 from Turin 134.571 16.348 Rho see Turin–Milan railway 0.000 Milano Centrale

The Domodossola–Milan railway line is a major Italian railway route and an important part of the European rail network. It is one of Italy's busiest lines for both passenger and freight trains. The line connects Milan and Domodossola with Brig, an important Swiss railway junction, via the Simplon Tunnel. Direct passenger trains run from Brig to Paris (via Lausanne and Geneva ) and Brussels and Luxembourg via Basel. The line runs through lower Varese Province, the valley of Ossola and along the shore of Lake Maggiore.

History

The line was completed to Gallarate in the early 1860s and was extended over the Ticino River in 1882, reaching Domodossola in 1888. The Simplon Tunnel was completed and the line extended to it from Domodossola in 1906; it was duplicated in 1922.^[1] It was part of the Società per le strade ferrate dell'Alta Italia (Upper Italian Railways) from 1865, the Società per le Strade Ferrate del Mediterraneo (Mediterranean Railway Company) from 1885 and Ferrovie dello Stato from 1905.

Route

The line is fully electrified at 3,000 volts DC and is double track. In some stretches between Arona and Domodossola, the two tracks are not adjacent: the southbound line towards Milan runs directly along the shore of Lake Maggiore; the northbound line towards Domodossola is located a little inland because of the local geography. At Domodossola the electrification system changes to the Swiss system of 15,000 volts AC 16.7 Hz for the Simplon Tunnel.

The regional passenger rail service is operated by Trenord. The section between Gallarate and Milan is also served by suburban line S5. The railway is also served by long distance Eurocity and EuroNight trains, as well as the high-speed Cisalpino trains, which connect Milan to the Swiss cities of Lausanne, Geneva, Bern and Basel.

The Domodossola–Milan line is also used by freight trains operated by Trenitalia Cargo, SBB Cargo Italia and other private companies.

The line passes through the metropolitan area to the north-west of Milan, across the plain towards Gallarate. It continues through the forests of lower Varese Province towards Lake Maggiore. After Sesto Calende it crosses the Ticino River on an iron bridge, which was opened to traffic in 1882. State road 33 (the Milan–Simplon Pass road) uses the same bridge, above the railway. From Arona, the line largely runs along the western shore of Lake Maggiore, keeping above the shore, passing through the major tourist town of Stresa. After Baveno, it enters the Toce plain and runs for about 30 km up the Ossola valley to Domodossola. It then approaches the Simplon Tunnel through nine tunnels including the 2,966 metre-long Varzo Tunnel, which is built as a spiral in order to gain height.

References

See also

• List of railway lines in Italy