Mercedes-Benz W201

  • Mercedes-Benz W201
  • (190, 190 E, 190 D)
Overview
Manufacturer Mercedes-Benz
Also called Kaengsaeng 88 (North Korea, 1990–94, German CKDs)
Pyeonghwa 410 (North Korea, 1994–02, Indian CKDs)
Production December 1982 – April 1993
1,874,668 built[1]
Assembly
Designer Peter Pfeiffer, Bruno Sacco (1979)
Body and chassis
Class Compact executive car (D)
Body style 4-door sedan
Layout Front-engine, rear-wheel-drive
Powertrain
Engine
Transmission
Dimensions
Wheelbase 2,665 mm (104.9 in)
Length 1982–88: 4,420 mm (174.0 in)
1988–93: 4,448 mm (175.1 in)
Width 1982–88: 1,678 mm (66.1 in)
1988–93: 1,690 mm (66.5 in)
Height 1982–88: 1,390 mm (54.7 in)
1988–93: 1,375 mm (54.1 in)
Kerb weight 1,110–1,300 kg (2,447–2,866 lb)
Chronology
Successor Mercedes-Benz C-Class (W202)

The Mercedes-Benz W201 was the first compact executive car from Mercedes-Benz introduced in 1982, positioned below the E-Class—and marketed under variants of the Mercedes-Benz 190 nameplate.

The W201 featured a patented rear 5-link suspension, subsequently used in E and C class models, front and rear anti-roll bars, anti-dive and anti-squat geometry—as well as available airbags, ABS brakes and seatbelt pretensioners.

The W201 enjoyed strong sales in Europe but fared poorly in the United States.[2] Series production ended 13 April 1993 after the manufacture of approximately 1.8 million examples.[1] The 190 and its variants were succeeded in the compact executive car segment by the C-Class, a newly created nameplate.

Background

Mercedes spent over £600 million researching and developing the 190 and subsequently said it was 'massively over-engineered'. It marked a new venture for Mercedes-Benz, finally giving it a new smaller model to compete with the likes of the Audi 80, BMW 3 Series and Saab 900, as well as the more expensive versions of the many medium-sized saloons and hatchbacks from mainstream brands.[3] The W201-based 190 was introduced in November 1982, and was sold in right-hand drive for the UK market from September 1983.[4]

1987 Mercedes-Benz 190 E 2.3 (US)

Local red tape in Bremen (which produced commercial vehicles at the time) prevented Daimler-Benz from building the 190 there, so production was started in Sindelfingen at a capacity of just 140,000 units per year. Eventually after just the first year, Bremen was cleared for production of the 190, replacing its commercial vehicle lines, and there the 190 was built with the first running modifications since release.

The 190 E (E for Einspritzung, or Fuel Injection) model uses the Bosch KE-Jetronic Multi-Point Fuel Injection to meter fuel instead of the carburetor of 190 models. Thanks to their fuel injection system, 190 E models made more power and were more fuel efficient when compared to non-fuel injected 190 models.[5]

Petrol models

1985 Mercedes-Benz 190 E

In 1982, the first available models were the 190 and 190 E. Each was fitted with an M102 1,997 cc displacement engine. The 190 was fitted with an M102.921 90 hp (67 kW) engine and the 190 E fitted with an M102.962 122 hp (91 kW) engine. In September 1983, the 190 E 2.3 (2,299 cc) was released for the North American market only (although a 190 E 2.3 appeared in other countries later), fitted with a 113 hp (84 kW) M102.961 engine. This reduction in power was due to the emissions standards in the North American market at the time. The intake manifold, camshaft, and fuel injection system were refined in 1984, and the engine produced 122 hp (91 kW). The carbureted 190 was revised in 1984 as well, increasing its horsepower rating to 105 hp (78 kW). 1984 also saw the arrival of the 2.3-16 "Cosworth."

In 1985, the 190 E 2.3 now came fitted with the M102.985 engine, producing 130 hp (97 kW) hp until it was revised in 1987 to use Bosch KE3-Jetronic Injection, a different ignition system, and a higher compression ratio,[6] producing 136 hp (101 kW).

1987 marked the arrival of the first inline-six equipped 190, the 190 E 2.6. Fitted with the M103.940 engine, the 190 E 2.6 provided 160 hp (119 kW) with a catalyst and 164 hp (122 kW) without. In the North American market, the 190 E 2.6 was sold until 1993, the end of the W201 chassis's production. From 1992-1993 the 2.6 was available as a special "Sportline" model, with an upgraded suspension and interior.[7] The 190 E 2.3 was sold until 1988, then went on a brief hiatus until it was sold again from 1991 until 1993.

Diesel models

Mercedes 190 D (Chile)

The W201 190 D is known for its extreme reliability and ruggedness with many examples doing more than 500,000 miles without any major work. The 190 D was available in three different engines. The 2.0 was the baseline, and was never marketed in North America. The 2.2, with the same power as the 2.0, was introduced in September 1983. It was only available in model years 1984 and 1985, and only in the USA and Canada.[8] The 2.5 was available in the late 80's and early 90's. The 2.5 Turbo, while sold in mainland Europe, but not the UK for many years, was available to American buyers only in 1987 and is now somewhat of a collectors item. The exterior of the 2.5 Turbo is different from other models in that it has fender vents in the front passenger side fender for the turbo to breathe.

Limited editions

For the UK and Irish market a special edition 190 was released for the 1993 model year. The car was given the badge name 190LE though on the rear boot lid it read 190 E (on the left hand side of the lock) and LE on the right hand side. Roughly 1000 LEs were produced and each one came with a large A3 sized certificate giving each car a unique number.

LEs were available in three colours only; Azzuro Blue (blue/purple), Brilliant Silver and Rosso Red (Burgundy). The Azzuro blue coloured cars came with a grey checked cloth interior, the silver ones with black checked cloth and the Rosso Red with biscuit/cream checked cloth.

1991 Mercedes-Benz 180 E Limited Edition (Australia)

LEs were equipped with extra features that had been options on the other models and were only available with the 1.8- or 2.0-litre engine. Both the 1.8- and 2.0-litre models were equipped with a standard electric tilt and slide steel sunroof, four electric windows, electric aerial, 8-hole alloy wheels, Blaupunkt Verona CR43 Radio/cassette and walnut wood trim (as opposed to Zebrano wood). The 2.0-litre-engined version had in addition rear headrests and a front armrest. The LE was nearly £3500 cheaper than a non-LE 1.8 car of identical specification, and £2000 cheaper for a 2.0-litre.

No further options could be added to LE cars from the factory - though some were equipped with other dealer-installed items.

In Australia, a limited run of 180 E Limited Edition cars could be purchased from October 1991 to March 1994.[9] This was essentially a 1.8-litre 190 E with very basic trim.[9] At launch, Mercedes-Benz were able to price the 180 E at A$45,450, compared to the 190 E at A$63,200. This was achieved by taking out equipment and also by offsetting import duties with the now discontinued policy of export credits gained through using Australian-made components for the whole Mercedes-Benz range, such as suspension springs and windscreen glass.[10] The 180 E deleted anti-lock brakes, power windows, climate control, electric seats, heated mirrors, cruise control and multi-speaker sound system; although power steering, air conditioning and central locking remained standard.[11]

In 1993, for the U.S. market, 2 LE models were offered, limited to 1400 units (700 190 E 2.3 LE and 700 190 E 2.6 LE). The 2.3 LE was only offered in Emerald Green while the 2.6 was only offered in black.

190 E 2.3-16 and 2.5-16 "Cosworth"

In the late 1970s, Mercedes competed in rallying with the big V8-powered Coupés of the R107 Series, mainly the light-weight Mercedes 450 SLC 5.0. Mercedes wished to take the 190 E rallying, and asked British engineering company Cosworth to develop an engine with 320 bhp (239 kW) for the rally car. This project was known as project "WAA' by Cosworth".[12] During this time, the Audi Quattro with its all-wheel drive and turbocharger was launched, making the 2.3-16v appear outclassed. With a continued desire to compete in high-profile motor sport with the 190, and also now an engine to do it with, Mercedes turned to the Deutsche Tourenwagen Meisterschaft (DTM) (German Touring Car Championship) motor sport series instead. Cars racing in this championship, however, had to be based on a roadgoing model. Mercedes therefore had to put into series production a 190 fitted with a detuned version of the Cosworth engine. This high-performance model was known as the 190 E 2.3-16, and debuted at the Frankfurt Auto Show in September 1983, after its reputation had already been established. Three cars, only slightly cosmetically altered, had set three world records in August at the Nardo testing facility in Italy, recording a combined average speed of 154.06 mph (247.94 km/h) over the 50,000 km endurance test, and establishing twelve international endurance records. The Mercedes 190-E Cosworth was also featured on the second episode in series fifteen of the popular car show Top Gear.

Engine

2.5-16 Cosworth

The Cosworth engine was based on the M102 four cylinder 2.3-litre 8-valve 136 hp (101 kW) unit already fitted to the 190- and E-Class series. Cosworth developed the cylinder head, "applying knowledge we've learnt from the DFV and BDA."[13] It was made from light alloy using Coscast's unique casting process and brought with it dual overhead camshafts and four valves per cylinder, meaning 16 valves total which were developed to be the "largest that could practically be fitted into the combustion chamber".[13]

In roadgoing trim,the 2.3 L 16-valve engine made "185 hp (138 kW) at 6,200 rpm and 174 lb·ft (236 N·m) at 4,500 rpm. The oversquare 95.50 x 80.25 mm bore and stroke dimensions ensuring that it revs easily up to the 7000 rpm redline".[14] Acceleration from 0–100 km/h (62 mph) was less than eight seconds, and the top speed was 230 km/h (143 mph).[14]

US-Specification cars had a slightly reduced compression ratio (9.7:1 instead of 10.5:1), and were rated at 167 hp (125 kW) @ 5800 rpm and 162 lb·ft (220 N·m) @ 4750.

The roadgoing version of the engine was reconfigured with reduced inlet and exhaust port sizes, different camshaft profiles, no dry sump configuration and Bosch K-jetronic replacing the specialised Kugelfischer fuel injection. These changes helped bring power down to the required 185 bhp (138 kW) specification, but still resulted in a "remarkably flexible engine, with a very flat torque curve and a wide power band".[13] The heads for the engines were cast at Cosworth's Coscast foundry in Worcester and sent to Germany to be fitted to the rest of the engine, parts of which were different from the standard 2.3 including light pressed alloy pistons, and rings designed to withstand higher engine speeds, whilst con-rods, bearings and bearing caps were found to be strong enough as standard and left unaltered.[13]

2.5 model

1990 Mercedes-Benz 190E 2.5-16 (UK)

An enlarged 2.5 L engine replaced the 2.3 L in 1988. It offered double-row timing chains to fix the easily snapping single chains on early 2.3 engines, and increased peak output by 17 hp (12.5 kW) with a slight increase in torque. For the European market without catalyst (RÜF) the car delivered 204 bhp (150 kW). Catalyst equipped 2.5-16s produced a slightly reduced 197 bhp (147 kW). It is debated whether the 2.5 L engine was developed and built by Mercedes or Cosworth. Mercedes were not keen to broadcast the fact that their most sporting saloon car had an engine developed by a British company. However some cylinder heads from 2.5 L cars are stamped with the Coscast logo indicating they were cast at Cosworth's foundry just like the 2.3s. Cosworth also list the project code "WAB" for the development of the 2.5-16-valve head just as they do for the 2.3-16-valve head.[15]

16v differences

Due to their performance, the 16-valve cars were different from the other 190 models. The body kit on the 2.3-16 and 2.5-16 reduced the drag coefficient to 0.32, one of the lowest CD values on a four-door saloon of the time, whilst also reducing lift at speed. The steering ratio was quicker and the steering wheel smaller than that on other 190s, whilst the fuel tank was enlarged from 55 to 70 L. The Getrag 5-speed manual gearbox was unique to the 16-valve and featured a 'racing' gear pattern with 'dog-leg' first gear, left and down from neutral. This meant that the remaining 2nd, 3rd, 4th and 5th gears were in a simple H pattern allowing fast and easy selection. The gearchange quality was, however, noted as "notchy, baulky",[14] criticisms which weren't levelled at the BMW M3 (E30) which shared the same gearbox. The pattern is also unusual in that the driver engages reverse by shifting left and up from neutral, as for first gear in a conventional pattern. This was demonstrated in a Top Gear episode (S15E02) where James May took a 190 E 2.3-16 Cosworth and repeatedly confused reverse and first gear. An oil cooler was fitted to ensure sufficient oil cooling for the inevitable track use many of these cars were destined for.

The strictly four-seater interior had Recaro sports seats with strong side bolsters for front and rear passengers. 3 extra dials - an oil temperature gauge, stopwatch and voltmeter - were included in the centre console. The 190 E 2.3-16 was available in only two colours, Blue-Black metallic (Pearl Black in the US), and Smoke Silver. The 2.5-16 added Almandine Red and Astral Silver.

All 2.3-16-valve 190 models are fitted with a Limited Slip Differential (LSD) as standard. They were also available with Mercedes' ASD system which was standard equipment on the 2.5-16v. The ASD is an electronically controlled, hydraulically locking differential which activates automatically when required. The electronic control allows varied amounts of differential lock from the standard 15% right up to 100%. It is not a traction control system however, and can only maximize traction rather than prevent wheel spin. Activation of the ASD system is indicated by an illuminating amber triangle in the speedometer.

The suspension on 16-valve models is very different from the standard 190 (W201). As well as being lower and stiffer, it has quicker dampers, larger anti-roll bars, harder bushings and hydraulic Self-levelling suspension (SLS) on the rear. This allows the rear ride height to remain constant even when the car is fully loaded.

At the inauguration of the new, shorter Nürburgring in 1984, a race with identical cars was held, with former and current F1 pilots at the wheel. A then unknown Ayrton Senna took first place.

Private Teams such as AMG later entered the 2.3-16 in touring cars races, especially the DTM. In the late 1980s, the 2.5-16 (never released in the United States) raced many times, against the similar BMW M3 and even the turbocharged Ford Sierra RS Cosworth.

Evolution models

190 E 2.5-16 Evolution I

With the debut of the BMW M3 Sport Evolution, Mercedes' direct competitor, it became obvious that the 2.5-16 needed a boost for the circuit. In March 1989, the 190 E 2.5-16 Evolution debuted at the Geneva Auto Show. The Evo I, as it came to be called, had a new spoiler and wider wheel arches. Many changes were made to under-the-skin components such as brakes and suspension. There was a full SLS suspension allowing vehicle ride height to be adjusted from an interior switch. All were intended to allow the Evolution cars to be even more effective round a track.

The Evo I's output is similar to the 202 bhp (151 kW) of the "regular" 2.5-16. However this car had a redesigned engine of similar capacity but, most importantly, a shorter stroke and bigger bore which would allow for a higher rev limit and improved top-end power capabilities. Additional changes stretch to "rotating masses lightened, lubrication improved and cam timing altered".[16] Cosworth also list a project code "WAC" for the development of the short-stroke Evolution engine.[12][15]

Only 502 units of the Evolution model were produced for homologation in compliance with DTM rules. For those customers desiring even more performance, a PowerPack option engineered by AMG was available for DM 18,000. The PowerPack option included hotter camshafts, a larger diameter throttle body, more aggressive ignition and fuel management as well as optimization of the intake and exhaust systems. The net result was an additional 30 bhp (22 kW).

In March 1990, at the Geneva Auto Show, the 190 E 2.5-16 Evolution II was shown. With the success of the first Evolution model, this model's 502-unit production was already sold before it was unveiled. This car retailed in 1990 for USD $80,000.

The "Evo II" included the AMG PowerPack fitted to the same short-stroke 2.5 engine as the Evolution, as well as a full SLS suspension allowing vehicle ride height to be adjusted from an interior switch. An obvious modification to the Evolution II is a radical body kit (designed by Prof. Richard Eppler from the University of Stuttgart) with a large adjustable rear wing, rear window spoiler, and Evolution II 17-inch wheels. The kit served an aerodynamic purpose—it was wind tunnel tested to reduce drag to 0.29, while at the same time increasing downforce. Period anecdotes tell of BMW research and development chief, Wolfgang Reitzle, saying "the laws of aerodynamics must be different between Munich and Stuttgart; if that rear wing works, we'll have to redesign our wind tunnel." The anecdote claims that BMW did.[17]

As mentioned 500 were made in "blauschwarz" blue/black metallic. But the last two, numbers 501 and 502 were made in astral silver.

16V AMG power pack

Available only to 2.5-16 and Evolution I models, optional AMG Power Pack increased power to 224 bhp (166 kW) at 7,200 rpm and torque to 181 lb·ft (245 N·m) at 5,000 rpm, while pushing the top speed up to 155 mph. In their final incarnations, these engines produced up to 350 bhp (260 kW) in racing tune.

Engines

Engine displacement (cc) Model Configuration Power PS (kW) Max Speed mph (km/h) Model Badge
1997 Carb I4 8V 90 (67) 109 (175) 190
1997 Carb I4 8V 105 (77) 115 (185) 190
1737 Inj I4 8V 107 (79) 115 (185) 190 E 1.7
1797 Inj I4 8V 109 (80) 115 (185) 190 E 1.8, 180 E (AUS)
1997 Inj I4 8V 122 (89) 122 (195) 190 E, 190 E 2.0
2298 Inj I4 8V 136 (100) 124 (200) 190 E 2.3
2597 Inj I6 12V 166 (122) 133 (215) 190 E 2.6
2299 Inj ECE I4 16V 185 (136) 143 (235) 190 E 2.3-16
2299 Inj RÜF I4 16V 177 (130) 140 (225) 190 E 2.3-16
2299 Inj KAT I4 16V 170 (125) 137 (220) 190 E 2.3-16
2498 Inj RÜF I4 16V 204 (150) 146 (235) 190 E 2.5-16
2498 Inj KAT I4 16V 194 (143) 143 (230) 190 E 2.5-16
2498/2463 Inj I4 16V AMG p/p 225 (165) 152 (244) 190 E 2.5-16
2463 Inj KAT I4 16V Evolution (Evo I) 194 (143) 143 (230) 190 E 2.5-16
2463 Inj I4 16V Evolution II (Evo II) 235 (173) 155 (250) 190 E 2.5-16
1997 Diesel I4 8V 72 (53) 100 (160) 190 D 2.0
1997 Diesel I4 8V 75 (55) 100 (160) 190 D 2.0
2199 Diesel I4 8V 73 (54) 100 (160) 190 D 2.2
2497 Diesel I5 10V 94 (69) 109 (175) 190 D 2.5
2497 Diesel Turbo I5 10V 122 (89) 119 (192) 190 D 2.5 TURBO

[18]

[19]

The turbo diesel model listed was not marketed in right hand drive form for the UK.

AMG models

AMG 1993 DTM competition car

AMG was not part of Mercedes-Benz when the 190 was first produced, but a separate racing and tuning company. As AMG had racing experience in the DTM, they were tuning all the factory petrol engines for the customers and 190 E was one of them. Engine tuning added 25 bhp (19 kW). They fitted aerodynamic features (spoilers) improving Cw and high speed stability, alloy wheels, leather interior and larger engines up to 6-litre V8's.

The 190 E 3.2 AMG was the first model sold through Mercedes-Benz dealerships with Mercedes-Benz new car warranty. About 200 complete cars were made, in black or silver: they were very expensive (about $90,000). Besides 200 complete 190 E 3.2 AMG's, Mercedes-Benz sold AMG body kits and 3.2l AMG engines separately, so there are 190's fitted with those features at the factory or retrofitted. Sporty 190 E 3.2 AMG straight-six 12-valve engines produced 234 bhp (174 kW), and reached 260 km/h (162 mph).

Mercedes 190 D BlueEFFICIENCY (2009)

It is an experimental vehicle demonstrating the improvements made in Diesel technology over the last 20 years, in isolation from the equally profound changes in the safety and comfort of the car as a whole. It was built from a 1988 190 E 2.6 which was fitted with a Mercedes-Benz OM651 engine, rated at 204 PS (150 kW; 201 hp) and 500 N·m (369 lb·ft) at 1,600–1,800 rpm. The 190 D does the 0 to 100 km/h sprint in 6.2 seconds, with fuel efficiency of 4.9 litres per 100 kilometres (NEDC). By comparison, the original car has fuel efficiency of 7.3 litres per 100 kilometres. The 190 D BlueEFFICIENCY was also compared to C 250 CDI BlueEFFICIENCY, which has fuel efficiency of 5.1 litres per 100 kilometres via NEDC method, despite the modern C 250 CDI BlueEFFICIENCY being 385 kilograms heavier, 16 centimetres longer, and around 9 centimetres wider and higher than a 190.[20][21][22]

References

Notes

  1. 1 2 Kittler, Eberhard (2001). Deutsche Autos seit 1990, Band 6. Stuttgart: Motorbuch Verlag. p. 100. ISBN 3-613-02052-1.
  2. View all comments that have been posted about this article. (28 June 2007). "Warren Brown - Compact Luxury Taken to a Higher Level". The Washington Post. Retrieved 10 October 2010.
  3. "Top 10: greatest-ever Mercedes".
  4. http://www.benzinsider.com/2007/03/mercedes-history-the-201-series-1982-1993/
  5. http://www.startekinfo.com/StarTek/outside/11832/Resources/201Create/PDF/30006.pdf
  6. "1990-1993 Mercedes-Benz 190: Full review". Consumer Guide Automotive. HowStuffWorks.com, Inc. 28 February 2012. Retrieved 26 July 2012.
  7. Mastrostefano, Raffaele, ed. (1985). Quattroruote: Tutte le Auto del Mondo 1985 (in Italian). Milano: Editoriale Domus S.p.A. p. 576. ISBN 88-7212-012-8.
  8. 1 2 "180E sedan - Overview". GoAuto. Retrieved 29 December 2015.
  9. Morley, David (28 October 1999). "Mercedes' little bundle of joy". Drive. Retrieved 29 December 2015.
  10. "180E sedan - Our Opinion". GoAuto. Retrieved 29 December 2015.
  11. 1 2 "Cosworth project list".
  12. 1 2 3 4 "Flying the Flag". Autocar Magazine. 7 August 1985. pp. 32–33.
  13. 1 2 3 "Shooting Star". Autocar Magazine. 7 August 1985. pp. 35–40.
  14. 1 2 "Cosworth type reference".
  15. "Les Grandes Marques a Monaco, Bonhams (16th May 2005)". Practical Classics.
  16. "March 1990 Introduction 190E 2.5-16 Evolution II". Mercedes 190E 16v portal.
  17. "Mercedes-Benz PKW vehicle list".
  18. "Produktinformationen fur die Mercedes-Benz-Vertriebsorganisation 190 E 2.5-16 Motor M 102 mit 16 Ventilen".
  19. 1990 Mercedes 190 D upgraded to new BlueEFFICIENCY engine, jumps from 32 to 48 mpg
  20. "Autocar 07 September 2009". Archived from the original on 5 October 2009.
  21. The Mercedes 190 D BlueEFFICIENCY experimental vehicle - Back to the future: Baby-Benz with an up-to-date C-Class diesel engine

Bibliography

General

  • Barrett, Frank (1998). Illustrated Buyer's Guide Mercedes-Benz. Motorbooks International Illustrated Buyer's Guide series (2nd ed.). Osceola, WI, USA: MBI Publishing. ISBN 0760304513. 
  • Clarke, R.M., ed. (2001). Mercedes 190 Limited Edition Extra 1983-1993. Road Test Portfolio Series. Cobham, Surrey, UK: Brooklands Books. ISBN 1855205629. 
  • Clarke, R.M., ed. (2007). Mercedes AMG Gold Portfolio 1983-1999. Road Test Portfolio Series. Cobham, Surrey, UK: Brooklands Books. ISBN 9781855207455. 
  • Engelen, Günter (2002). Mercedes-Benz Personenwagen Band 3 Seit 1986 [Mercedes-Benz Passenger Cars Volume 3 Since 1986]. Stuttgart: Motorbuch Verlag. ISBN 3613021692.  (in German)
  • Hofner, Heribert; Schrader, Halwart (2005). Mercedes-Benz Automobile Band 2: von 1964 bis heute [Mercedes-Benz Automobiles Volume 2: from 1964 to today]. Königswinter, Germany: Heel. ISBN 3898804194.  (in German)
  • Howard, Geoffrey (1984). Mercedes Benz S-Class and the 190 16E. High Performance Series. London: Cadogan Publications. ISBN 0947754083. 
  • Kittler, Eberhard (2002). Typenkompass Mercedes-Benz Band 2. Personenwagen seit 1976 [Typenkompass Mercedes-Benz Volume 2. Passenger Cars since 1976]. Typenkompass series. Stuttgart: Motorbuch Verlag. ISBN 3613022095.  (in German)
  • Neßhöver, Jost (2012). Mercedes-Benz 190 (W 201): Entwicklung - Modelle - Technik [Mercedes-Benz 190 (W201): Development - Models - Technology] (in German). Königswinter: HEEL. ISBN 9783868526356. 
  • Niemann, Harry (2006). Personenwagen von Mercedes-Benz: Automobillegenden und Geschichten seit 1886 [Passenger Cars from Mercedes-Benz: Automobile Legends and Stories since 1886]. Stuttgart: Motorbuch Verlag. ISBN 3613025965.  (in German)
  • Oswald, Werner (2001). Mercedes-Benz Personenwagen Band 2 1945–1985 [Mercedes-Benz Passenger Cars Volume 2 1945–1985]. Stuttgart: Motorbuch Verlag. ISBN 3613021684.  (in German)
  • Schlegelmilch, Rainer W.; Lehbrink, Hartmut; von Osterroth, Jochen (2013). Mercedes (revised ed.). Königswinter, Germany: Ullmann Publishing. ISBN 9783848002672. 
  • Schwartz, Egbert; Gerstl, Theo (2012). Mercedes 190: Alles über den legendären Baby-Benz W 201 [Mercedes 190: Everything about the legendary Baby-Benz W 201] (in German). München: GeraMond. ISBN 9783862456314. 
  • Taylor, James (1994). Mercedes-Benz since 1945: A Collector's Guide. Volume 4: The 1980s. Croydon, UK: Motor Racing Publications. pp. 8–16, 41–64, 97, 100–103, 105–106, 108. ISBN 0947981772. 
  • Taylor, James (2009). Mercedes-Benz: Cars of the 1990s. Crowood AutoClassic Series. Ramsbury, Marlborough, UK: The Crowood Press. pp. 9–20, 27–31. ISBN 9781847970961. 
  • Vieweg, Christof (2007). C-Klasse: Vom Baby-Benz zum Bestseller - 25 Jahre Mercedes-Benz C-Klasse [C-Class: from Baby-Benz to Bestseller - 25 years of the Mercedes-Benz C-Class] (in German). Bielefeld, Germany: Delius Klasing. ISBN 9783768819695. 

Workshop manuals

  • Etzold, Hans-Rüdiger (2003). Mercedes 190 Diesel: Typ W 201 Diesel von 8/83 bis 5/93. So wird's gemacht, Band 47 (in German) (8th ed.). Bielefield, Germany: Delius Klasing. ISBN 3768804917. 
  • Etzold, Hans-Rüdiger (2012). Mercedes 190/190 E: Typ W 201 von 12/82 bis 5/93. So wird's gemacht, Band 46 (in German) (13th ed.). Bielefield, Germany: Delius Klasing. ISBN 9783768804905. 
  • Korp, Dieter (2008). Mercedes-Benz: 190 / 190E. Jetzt helfe ich mir selbst series, Band 106 (in German). Stuttgart: Motorbuch Verlag. ISBN 9783879439355. 
  • Mellon, Thomas A, ed. (2001). Chilton Mercedes: Coupes/Sedans/Wagons, 1974-84 Repair Manual. Chilton Total Car Care Series. Radnor, PA, USA: Chilton; Sparkford, UK: Haynes. ISBN 0801990769. 
  • Rendle, Steve; Drayton, Spencer (1997). Mercedes-Benz 190, 190E and 190D 1983-1993. Haynes Service and Repair Manual Series. Sparkford, UK: Haynes. ISBN 1859604501. 
  • Russek, Peter (1991). Mercedes 190/190E Series 201 2.0/2.3 Litre 1982 to 1992. Pocket Mechanic Vehicle Manual. Caversham, Reading, Berkshire, UK: Peter Russek Publications. ISBN 090777931X. 
  • Russek, Peter (1994). Mercedes 190D Series 201 2.0/2.3 Litre 1983 to 1992. Pocket Mechanic Vehicle Manual. Caversham, Reading, Berkshire, UK: Peter Russek Publications. ISBN 090777931X. 
  • Mercedes 190 / 190E ab Dezember 1982. Reparaturanleitung series, Band 786/787. (in German). Zug, Switzerland: Verlag Bucheli. 2012. ISBN 9783716816691. 
  • Mercedes 190 Serie 201 ab November 1984. Reparaturanleitung series, Band 1039. (in German). Zug, Switzerland: Verlag Bucheli. 2012. ISBN 9783716817766. 
  • Mercedes 190D Serie 201 ab September 1985. Reparaturanleitung series, Band 1089/1090/1091. (in German). Zug, Switzerland: Verlag Bucheli. 2012. ISBN 9783716818190. 
  • Mercedes-Benz Technical Companion. Cambridge, MA, USA: Bentley Publishers. 2005. ISBN 9780837610337. 
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.