Maxwell–Boltzmann statistics

Statistical mechanics

Thermodynamics Kinetic theory
Particle statistics Spin-statistics theorem Identical particles Maxwell–Boltzmann Bose–Einstein Fermi–Dirac Parastatistics Anyonic Statistics Braid Statistics
Thermodynamic ensembles NVE Microcanonical NVT Canonical µVT Grand canonical NPH Isoenthalpic–isobaric NPT Isothermal–isobaric
Models Debye Einstein Ising Potts
Potentials Internal energy Enthalpy Helmholtz free energy Gibbs free energy Grand potential / Landau free energy
Scientists Maxwell Boltzmann Gibbs Einstein Ehrenfest von Neumann Tolman Debye Fermi Bose

Maxwell–Boltzmann statistics can be used to derive the Maxwell–Boltzmann distribution of particle speeds in an ideal gas. Shown: distribution of particle speed for 10⁶ oxygen particles at −100, 20 and 600 °C.

In statistical mechanics, Maxwell–Boltzmann statistics describes the average distribution of non-interacting material particles over various energy states in thermal equilibrium, and is applicable when the temperature is high enough or the particle density is low enough to render quantum effects negligible.

The expected number of particles with energy $\varepsilon _{i}$ for Maxwell–Boltzmann statistics is

{\frac {\langle N_{i}\rangle }{N}}={\frac {g_{i}}{e^{(\varepsilon _{i}-\mu )/kT}}}={\frac {1}{Z}}\,g_{i}e^{-\varepsilon _{i}/kT},

where:

$\varepsilon _{i}$ is the i-th energy level,
$\langle N_{i}\rangle$ is the average number of particles in the set of states with energy $\varepsilon _{i}$ ,
$g_{i}$ is the degeneracy of energy level i, that is, the number of states with energy $\varepsilon _{i}$ which may nevertheless be distinguished from each other by some other means,^{[nb 1]}
μ is the chemical potential,
k is Boltzmann's constant,
T is absolute temperature,
N is the total number of particles:

N=\sum _{i}N_{i}

Z is the partition function:

Z=\sum _{i}g_{i}e^{-\varepsilon _{i}/kT},

e^(...) is the exponential function.

Equivalently, the number of particles is sometimes expressed as

{\frac {\langle N_{i}\rangle }{N}}={\frac {1}{e^{(\varepsilon _{i}-\mu )/kT}}}={\frac {1}{Z}}\,e^{-\varepsilon _{i}/kT},

where the index i now specifies a particular state rather than the set of all states with energy $\varepsilon _{i}$ , and $Z=\sum _{i}e^{-\varepsilon _{i}/kT}$ .

Applications

Maxwell–Boltzmann statistics may be used to derive the Maxwell–Boltzmann distribution (for an ideal gas of classical particles in a three-dimensional box). However, they apply to other situations as well. Maxwell–Boltzmann statistics can be used to extend that distribution to particles with a different energy–momentum relation, such as relativistic particles (Maxwell–Jüttner distribution). In addition, hypothetical situations can be considered, such as particles in a box with different numbers of dimensions (four-dimensional, two-dimensional, etc.).

Limits of applicability

Maxwell–Boltzmann statistics are often described as the statistics of "distinguishable" classical particles. In other words, the configuration of particle A in state 1 and particle B in state 2 is different from the case in which particle B is in state 1 and particle A is in state 2. This assumption leads to the proper (Boltzmann) statistics of particles in the energy states, but yields non-physical results for the entropy, as embodied in the Gibbs paradox.

At the same time, there are no real particles which have the characteristics required by Maxwell–Boltzmann statistics. Indeed, the Gibbs paradox is resolved if we treat all particles of a certain type (e.g., electrons, protons, etc.) as indistinguishable, and this assumption can be justified in the context of quantum mechanics. Once this assumption is made, the particle statistics change. Quantum particles are either bosons (following instead Bose–Einstein statistics) or fermions (subject to the Pauli exclusion principle, following instead Fermi–Dirac statistics). Both of these quantum statistics approach the Maxwell–Boltzmann statistics in the limit of high temperature and low particle density, without the need for any ad hoc assumptions. The Fermi–Dirac and Bose–Einstein statistics give the energy level occupation as:

\langle N_{i}\rangle ={\frac {g_{i}}{e^{{(\varepsilon _{i}-\mu )/kT}}\pm 1}}.

It can be seen that the condition under which the Maxwell–Boltzmann statistics are valid is when

e^{{(\varepsilon _{{{\rm {min}}}}-\mu )/kT}}\gg 1,

where $\varepsilon _{{{\rm {min}}}}$ is the lowest (minimum) value of $\varepsilon _{i}$ .

Maxwell–Boltzmann statistics are particularly useful for studying gases that are not very dense. Note, however, that all of these statistics assume that the particles are non-interacting and have static energy states.

Derivations of Maxwell–Boltzmann statistics

Maxwell–Boltzmann statistics can be derived in various statistical mechanical thermodynamic ensembles:^[1]

The grand canonical ensemble, exactly.
The canonical ensemble, but only in the thermodynamic limit.
The microcanonical ensemble, exactly

In each case it is necessary to assume that the particles are non-interacting, and that multiple particles can occupy the same state and do so independently.

Derivation from microcanonical ensemble

Suppose we have a container with a huge number of very small particles all with identical physical characteristics (such as mass, charge, etc.). Let's refer to this as the system. Assume that though the particles have identical properties, they are distinguishable. For example, we might identify each particle by continually observing their trajectories, or by placing a marking on each one, e.g., drawing a different number on each one as is done with lottery balls.

The particles are moving inside that container in all directions with great speed. Because the particles are speeding around, they possess some energy. The Maxwell–Boltzmann distribution is a mathematical function that speaks about how many particles in the container have a certain energy.

In general, there may be many particles with the same amount of energy $\varepsilon$ . Let the number of particles with the same energy $\varepsilon _{1}$ be $N_{1}$ , the number of particles possessing another energy $\varepsilon _{2}$ be $N_{2}$ , and so forth for all the possible energies { $\varepsilon _{i}$ | i=1,2,3,...}. To describe this situation, we say that $N_{i}$ is the occupation number of the energy level $i.$ If we know all the occupation numbers { $N_{i}$ | i=1,2,3,...}, then we know the total energy of the system. However, because we can distinguish between which particles are occupying each energy level, the set of occupation numbers { $N_{i}$ | i=1,2,3,...} does not completely describe the state of the system. To completely describe the state of the system, or the microstate, we must specify exactly which particles are in each energy level. Thus when we count the number of possible states of the system, we must count each and every microstate, and not just the possible sets of occupation numbers.

To begin with, let's ignore the degeneracy problem: assume that there is only one way to put $N_{i}$ particles into the energy level $i$ . What follows next is a bit of combinatorial thinking which has little to do in accurately describing the reservoir of particles.

The number of different ways of performing an ordered selection of one single object from N objects is obviously N. The number of different ways of selecting two objects from N objects, in a particular order, is thus N(N − 1) and that of selecting n objects in a particular order is seen to be N!/(N − n)!. It is divided by the number of permutations, n!, if order does not matter. The binomial coefficient, N!/(n!(N − n)!), is, thus, the number of ways to pick n objects from $N$ . If we now have a set of boxes labelled a, b, c, d, e, ..., k, then the number of ways of selecting N_a objects from a total of N objects and placing them in box a, then selecting N_b objects from the remaining N − N_a objects and placing them in box b, then selecting N_c objects from the remaining N − N_a − N_b objects and placing them in box c, and continuing until no object is left outside is

{\begin{aligned}W&={\frac {N!}{N_{a}!(N-N_{a})!}}\times {\frac {(N-N_{a})!}{N_{b}!(N-N_{a}-N_{b})!}}~\times {\frac {(N-N_{a}-N_{b})!}{N_{c}!(N-N_{a}-N_{b}-N_{c})!}}\times \ldots \times {\frac {(N-\ldots -N_{l})!}{N_{k}!(N-\ldots -N_{l}-N_{k})!}}=\\\\&={\frac {N!}{N_{a}!N_{b}!N_{c}!\ldots N_{k}!(N-\ldots -N_{l}-N_{k})!}}\end{aligned}}

and because not even a single object is to be left outside the boxes, implies that the sum made of the terms N_a, N_b, N_c, N_d, N_e, ..., N_k must equal N, thus the term (N - N_a - N_b - N_c - ... - N_l - N_k)! in the relation above evaluates to 0!. (0!=1) which makes possible to write down that relation as

{\begin{aligned}W&=N!\prod _{{i=a,b,c,...}}^{k}{\frac {1}{N_{i}!}}\end{aligned}}

This is just the multinomial coefficient, the number of ways of arranging N items into k boxes, the i-th box holding N_i items, ignoring the permutation of items in each box.

Now going back to the degeneracy problem which characterizes the reservoir of particles. If the i-th box has a "degeneracy" of $g_{i}$ , that is, it has $g_{i}$ "sub-boxes", such that any way of filling the i-th box where the number in the sub-boxes is changed is a distinct way of filling the box, then the number of ways of filling the i-th box must be increased by the number of ways of distributing the $N_{i}$ objects in the $g_{i}$ "sub-boxes". The number of ways of placing $N_{i}$ distinguishable objects in $g_{i}$ "sub-boxes" is $g_{i}^{{N_{i}}}$ (the first object can go into any of the $g_{i}$ boxes, the second object can also go into any of the $g_{i}$ boxes, and so on). Thus the number of ways $W$ that a total of $N$ particles can be classified into energy levels according to their energies, while each level $i$ having $g_{i}$ distinct states such that the i-th level accommodates $N_{i}$ particles is:

W=N!\prod {\frac {g_{i}^{{N_{i}}}}{N_{i}!}}

This is the form for W first derived by Boltzmann. Boltzmann's fundamental equation $S=k\,\ln W$ relates the thermodynamic entropy S to the number of microstates W, where k is the Boltzmann constant. It was pointed out by Gibbs however, that the above expression for W does not yield an extensive entropy, and is therefore faulty. This problem is known as the Gibbs paradox. The problem is that the particles considered by the above equation are not indistinguishable. In other words, for two particles (A and B) in two energy sublevels the population represented by [A,B] is considered distinct from the population [B,A] while for indistinguishable particles, they are not. If we carry out the argument for indistinguishable particles, we are led to the Bose–Einstein expression for W:

W=\prod _{i}{\frac {(N_{i}+g_{i}-1)!}{N_{i}!(g_{i}-1)!}}

The Maxwell–Boltzmann distribution follows from this Bose–Einstein distribution for temperatures well above absolute zero, implying that $g_{i}\gg 1$ . The Maxwell–Boltzmann distribution also requires low density, implying that $g_{i}\gg N_{i}$ . Under these conditions, we may use Stirling's approximation for the factorial:

N!\approx N^{N}e^{{-N}},

to write:

W\approx \prod _{i}{\frac {(N_{i}+g_{i})^{{N_{i}+g_{i}}}}{N_{i}^{{N_{i}}}g_{i}^{{g_{i}}}}}\approx \prod _{i}{\frac {g_{i}^{{N_{i}}}(1+N_{i}/g_{i})^{{g_{i}}}}{N_{i}^{{N_{i}}}}}

Using the fact that $(1+N_{i}/g_{i})^{{g_{i}}}\approx e^{{N_{i}}}$ for $g_{i}\gg N_{i}$ we can again use Stirlings approximation to write:

W\approx \prod _{i}{\frac {g_{i}^{{N_{i}}}}{N_{i}!}}

This is essentially a division by N! of Boltzmann's original expression for W, and this correction is referred to as correct Boltzmann counting.

We wish to find the $N_{i}$ for which the function $W$ is maximized, while considering the constraint that there is a fixed number of particles $\left(N=\textstyle \sum N_{i}\right)$ and a fixed energy $\left(E=\textstyle \sum N_{i}\varepsilon _{i}\right)$ in the container. The maxima of $W$ and $\ln(W)$ are achieved by the same values of $N_{i}$ and, since it is easier to accomplish mathematically, we will maximize the latter function instead. We constrain our solution using Lagrange multipliers forming the function:

f(N_{1},N_{2},\ldots ,N_{n})=\ln(W)+\alpha (N-\sum N_{i})+\beta (E-\sum N_{i}\varepsilon _{i})

\ln W=\ln \left[\prod \limits _{{i=1}}^{{n}}{\frac {g_{i}^{{N_{i}}}}{N_{i}!}}\right]\approx \sum \limits _{{i=1}}^{n}\left(N_{i}\ln g_{i}-N_{i}\ln N_{i}+N_{i}\right)

Finally

f(N_{1},N_{2},\ldots ,N_{n})=\alpha N+\beta E+\sum \limits _{{i=1}}^{n}\left(N_{i}\ln g_{i}-N_{i}\ln N_{i}+N_{i}-(\alpha +\beta \varepsilon _{i})N_{i}\right)

In order to maximize the expression above we apply Fermat's theorem (stationary points), according to which local extrema, if exist, must be at critical points (partial derivatives vanish):

{\frac {\partial f}{\partial N_{i}}}=\ln g_{i}-\ln N_{i}-(\alpha +\beta \varepsilon _{i})=0

By solving the equations above ( $i=1\ldots n$ ) we arrive to an expression for $N_{i}$ :

N_{i}={\frac {g_{i}}{e^{{\alpha +\beta \varepsilon _{i}}}}}

Substituting this expression for $N_{i}$ into the equation for $\ln W$ and assuming that $N\gg 1$ yields:

\ln W=(\alpha +1)N+\beta E\,

or, rearranging:

E={\frac {\ln W}{\beta }}-{\frac {N}{\beta }}-{\frac {\alpha N}{\beta }}

Boltzmann realized that this is just an expression of the Euler-integrated fundamental equation of thermodynamics. Identifying E as the internal energy, the Euler-integrated fundamental equation states that :

E=TS-PV+\mu N

where T is the temperature, P is pressure, V is volume, and μ is the chemical potential. Boltzmann's famous equation $S=k\,\ln W$ is the realization that the entropy is proportional to $\ln W$ with the constant of proportionality being Boltzmann's constant. Using the ideal gas equation of state (PV=NkT), It follows immediately that $\beta =1/kT$ and $\alpha =-\mu /kT$ so that the populations may now be written:

N_{i}={\frac {g_{i}}{e^{{(\varepsilon _{i}-\mu )/kT}}}}

Note that the above formula is sometimes written:

N_{i}={\frac {g_{i}}{e^{{\varepsilon _{i}/kT}}/z}}

where $z=\exp(\mu /kT)$ is the absolute activity.

Alternatively, we may use the fact that

\sum _{i}N_{i}=N\,

to obtain the population numbers as

N_{i}=N{\frac {g_{i}e^{{-\varepsilon _{i}/kT}}}{Z}}

where Z is the partition function defined by:

Z=\sum _{i}g_{i}e^{{-\varepsilon _{i}/kT}}

In an approximation where ε_i is considered to be a continuous variable, the Thomas-Fermi approximation yields a continuous degeneracy g proportional to $\sqrt{\varepsilon}$ so that:

{\frac {{\sqrt {\varepsilon }}\,e^{-\varepsilon /kT}}{\int _{0}^{\infty }{\sqrt {\varepsilon }}\,e^{-\varepsilon /kT}}}

which is just the Maxwell-Boltzmann distribution for the energy.

Derivation from canonical ensemble

In the above discussion, the Boltzmann distribution function was obtained via directly analysing the multiplicities of a system. Alternatively, one can make use of the canonical ensemble. In a canonical ensemble, a system is in thermal contact with a reservoir. While energy is free to flow between the system and the reservoir, the reservoir is thought to have infinitely large heat capacity as to maintain constant temperature, T, for the combined system.

In the present context, our system is assumed to have the energy levels $\varepsilon _{i}$ with degeneracies $g_{i}$ . As before, we would like to calculate the probability that our system has energy $\varepsilon _{i}$ .

If our system is in state $\;s_{1}$ , then there would be a corresponding number of microstates available to the reservoir. Call this number $\;\Omega _{R}(s_{1})$ . By assumption, the combined system (of the system we are interested in and the reservoir) is isolated, so all microstates are equally probable. Therefore, for instance, if $\;\Omega _{R}(s_{1})=2\;\Omega _{R}(s_{2})$ , we can conclude that our system is twice as likely to be in state $\;s_{1}$ than $\;s_{2}$ . In general, if $\;P(s_{i})$ is the probability that our system is in state $\;s_{i}$ ,

{\frac {P(s_{1})}{P(s_{2})}}={\frac {\Omega _{R}(s_{1})}{\Omega _{R}(s_{2})}}.

Since the entropy of the reservoir $\;S_{R}=k\ln \Omega _{R}$ , the above becomes

{\frac {P(s_{1})}{P(s_{2})}}={\frac {e^{{S_{R}(s_{1})/k}}}{e^{{S_{R}(s_{2})/k}}}}=e^{{(S_{R}(s_{1})-S_{R}(s_{2}))/k}}.

Next we recall the thermodynamic identity (from the first law of thermodynamics):

dS_{R}={\frac {1}{T}}(dU_{R}+P\,dV_{R}-\mu \,dN_{R}).

In a canonical ensemble, there is no exchange of particles, so the $dN_{R}$ term is zero. Similarly, $dV_{R}=0.$ This gives

S_{R}(s_{1})-S_{R}(s_{2})={\frac {1}{T}}(U_{R}(s_{1})-U_{R}(s_{2}))=-{\frac {1}{T}}(E(s_{1})-E(s_{2})),

where $\;U_{R}(s_{i})$ and $\;E(s_{i})$ denote the energies of the reservoir and the system at $s_{i}$ , respectively. For the second equality we have used the conservation of energy. Substituting into the first equation relating $P(s_{1}),\;P(s_{2})$ :

{\frac {P(s_{1})}{P(s_{2})}}={\frac {e^{{-E(s_{1})/kT}}}{e^{{-E(s_{2})/kT}}}},

which implies, for any state s of the system

P(s)={\frac {1}{Z}}e^{{-E(s)/kT}},

where Z is an appropriately chosen "constant" to make total probability 1. (Z is constant provided that the temperature T is invariant.) It is obvious that

\;Z=\sum _{s}e^{{-E(s)/kT}},

where the index s runs through all microstates of the system. Z is sometimes called the Boltzmann sum over states (or "Zustandsumme" in the original German). If we index the summation via the energy eigenvalues instead of all possible states, degeneracy must be taken into account. The probability of our system having energy $\varepsilon _{i}$ is simply the sum of the probabilities of all corresponding microstates:

P(\varepsilon _{i})={\frac {1}{Z}}g_{i}e^{{-\varepsilon _{i}/kT}}

where, with obvious modification,

Z=\sum _{j}g_{j}e^{{-\varepsilon _{j}/kT}},

this is the same result as before.

Comments on this derivation:

Notice that in this formulation, the initial assumption "... suppose the system has total N particles..." is dispensed with. Indeed, the number of particles possessed by the system plays no role in arriving at the distribution. Rather, how many particles would occupy states with energy $\varepsilon _{i}$ follows as an easy consequence.
What has been presented above is essentially a derivation of the canonical partition function. As one can see by comparing the definitions, the Boltzmann sum over states is equal to the canonical partition function.
Exactly the same approach can be used to derive Fermi–Dirac and Bose–Einstein statistics. However, there one would replace the canonical ensemble with the grand canonical ensemble, since there is exchange of particles between the system and the reservoir. Also, the system one considers in those cases is a single particle state, not a particle. (In the above discussion, we could have assumed our system to be a single atom.)

Notes

↑ For example, two simple point particles may have the same energy, but different momentum vectors. They may be distinguished from each other on this basis, and the degeneracy will be the number of possible ways that they can be so distinguished.

References

↑ Tolman, R. C. (1938). The Principles of Statistical Mechanics. Dover Publications. ISBN 9780486638966.

Bibliography

Carter, Ashley H., "Classical and Statistical Thermodynamics", Prentice–Hall, Inc., 2001, New Jersey.
Raj Pathria, "Statistical Mechanics", Butterworth–Heinemann, 1996.

Statistical mechanics
Statistical ensembles	Microcanonical Canonical Grand canonical Isothermal–isobaric Isoenthalpic–isobaric ensemble
Statistical thermodynamics	Characteristic state functions
Partition functions	Translational Vibrational Rotational
Equations of state	Dieterici Van der Waals/Real gas law Ideal gas law Birch–Murnaghan
Entropy	Sackur–Tetrode equation Tsallis entropy Von Neumann entropy
Particle statistics	Maxwell–Boltzmann statistics Fermi–Dirac statistics Bose–Einstein statistics
Statistical field theory	Conformal field theory Osterwalder–Schrader axioms
Quantum statistical mechanics	Density matrix Gibbs measure Partition function Phase space formulation of quantum mechanics Slater determinant
See also	Probability distribution Elementary particles

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.