Matra Murena

Matra Murena
Overview
Manufacturer Matra
Also called Talbot-Matra Murena
Production 1980–1983
Designer Antonis Volanis
Body and chassis
Class Sports car
Body style 3-door hatchback
Layout MR layout
Powertrain
Engine 1.6 L Poissy engine ohv I4
2.2 L Type 180 ohc I4
Transmission 5-speed manual[1]
Dimensions
Wheelbase 2,435 mm (95.9 in)[1]
Length 4,070 mm (160.2 in)[1]
Width 1,752 mm (69.0 in)[1]
Height 1,220 mm (48.0 in)[1]
Curb weight 930 kg (2,050 lb)-1,030 kg (2,271 lb)[2]
Chronology
Predecessor Matra Bagheera
Successor None

The Matra Murena is a mid-engined, rear wheel drive sports car that was produced from 1980 through 1983 by the French engineering group Matra. The factory was located in the commune of Romorantin-Lanthenay in the department of Loir-et-Cher in central France.

Development history

The Murena, whose name is Italian for "Moray", was the successor to the Matra Bagheera, a similar vehicle that resulted from an earlier collaboration between Matra and Simca. Development proceeded under two project names; "M551" for the 1.6 litre version and "M552" for the 2.2 litre version.[3] The prototype received designation P-551 and was accompanied by a series of mockups. The Murena inherited the Bagheera's mid-engined layout and hatchback body shape, but substantial changes were made to address some of the problems with the previous model, among which were a lack of power, absence of a 5-speed transmission option, and a chassis extremely prone to rust. Engineering of the car was done entirely by Matra.[3] Greek industrial designer Antonis Volanis, who had contributed to the interior of the earlier Bagheera and been principal designer for the Matra Rancho, headed up the design.

The Murena drew heavily from the corporate parts bin, using engines from the Talbot Solara and Talbot Tagora, a transaxle from the Citroën CX, taillights steering rack and front suspension from the Talbot Horizon, front indicator and running lights from the Renault 12, and door handles from the Peugeot 505.[4][3]

Chassis

The Murena's steel chassis was similar to the Bagheera's although it was a new design.[3] In appearance it was very close to a full unitary body. The chassis did differ from the Bagheera's in two significant ways. One was that the rear cradle was reconfigured to accommodate a new rear suspension system. The second change was that the entire chassis was galvanised to prevent the Murena from falling victim to the rust problems that plagued the Bagheera.[5] The Murena was actually the first production car to use galvanised steel for all chassis parts.

The car was only built in a left hand drive configuration, although a small number of right hand drive conversions were done by Wooler-Hodec.[6]

Bodywork

Even though it used a chassis very similar in principle to the Bagheera and the same basic body-style, the styling for the Murena was all-new. The final shape was extremely aerodynamic for the time, with a reported drag coefficient () of 0.328.[5][4] The rear hatch opened to provide access to the engine mounted behind the passenger compartment and a rear luggage area. A signature feature carried over from the previous model was the seating arrangement - all three seats were placed in one row, with the middle seat folding down to become an armrest when not in use by a passenger.[7] In the Murano the three seats were separate, in contrast to the 2+1 arrangement in the Bagheera.

The car's twelve major body panels were made of fibreglass-epoxy. According to Matra's general manager, Jean-Louis Caussin, these body panels were produced using a manufacturing process known as the "sheet moulding compound" moulding process.[3] The new galvanised chassis coupled with the composite panels made the car essentially immune to rust, except for the rear suspension's trailing arms.[7]

Over its production life the car was offered in a range of ten colours; platinum metallic, white neve, coral metallic, green Hudson, bordeau, red mephisto, titanium gray, cinnamon metallic, yellow mimosa, and blue Colombia.

Suspension

The front suspension was similar to the Bagheera's, while the rear suspension was a departure from the Murena's predecessor. In the tradition of the Simca 1100, Talbot Alpine, and Talbot Horizon, at the front were upper and lower transverse A-arms with longitudinal torsion bars and telescopic hydraulic shock-absorbers. An anti-roll bar was also fitted. At the rear the Bagheera's torsion bar suspension was replaced by MacPherson struts and coil springs with trailing arms. An anti-roll bar was also fitted at the rear.

Powertrain

Two engines were offered. The base model had a 1.6 litre Poissy engine, while the more powerful version came with a 2.2 litre Type 180. The 2.2 litre engine could also be ordered with a performance package called the "Préparation 142" option that raised the power output from 84.3 kW (113.0 hp) to 101.4 kW (136.0 hp). This kit was initially a dealer-installed option, but the last 480 Murenas came with this uprated engine directly from the factory. This version was called the Murena S.[5] The standard 2.2 litre engine used a single Solex down-draught carburetor, but S models had twin side-draught Solex carburetors.

The Murena received a 5-speed manual transaxle derived from that found in the Citroen CX. Different models of Murena used different final-drive ratios but all Murenas used the same transaxle.

Model: Murena 1.6 Murena 2.2 Murena 2.2 "Préparation 142" and Murena S
Engine 1.6 Litre Poissy 2.2 Litre Type 180 2.2 Litre Type 180
Orientation Transverse Transverse Transverse
Cylinders 4 cylinders 4 cylinders 4 cylinders
Valves 8 valves (2 per cylinder) 8 valves (2 per cylinder) 8 valves (2 per cylinder)
Camshaft Single cam-in-block with overhead valves (OHV) Single overhead camshaft (SOHC) Single overhead camshaft (SOHC), custom profile
Displacement 1,592 cc (97.1 cu in) 2,155 cc (131.5 cu in) 2,155 cc (131.5 cu in)
Bore x Stroke 80.6 mm x 78 mm 91.7 mm x 81.6 mm 91.7 mm x 81.6 mm
Compression ratio 9.35:1 9.45:1 9.5:1
Horsepower 65.7 kW (88.1 hp) @ 5600 rpm 86 kW (115.3 hp) @ 5800 rpm 104 kW (139.5 hp) @ 6000 rpm
Torque 132.4 N·m (97.7 lb·ft) @ 3200 rpm 181.4 N·m (133.8 lb·ft) @ 3000 rpm 187.3 N·m (138.1 lb·ft) @ 3800 rpm
Catalyst No No No
Fuel grade RON 97 RON 97 RON 97
Carburation One Weber 36 DCNVA 16/100 two-barrel carburetor One Solex 34 CIC F two-barrel down-draught carburetor Two Solex 40 ADDHE two-barrel side-draught carburetors, intake manifold with 4 separate runners
Transmission 5-speed manual
Clutch Single dry plate with hydraulic actuation
Brakes (front) 234 mm diameter discs with floating single-piston calipers
Brakes (rear) 234 mm diameter discs with floating single-piston calipers 260.9 mm diameter discs with floating single-piston calipers
Tires 175/70HR13 or 185/60HR14 front,
195/70HR13 or 195/60 HR14 rear
185/60HR14 front, 195/60HR14 rear 185/60VR14 front, 195/60VR14 rear
Standing kilometre 33.3 seconds 30.4 seconds 29.1 seconds
0 to 100 km/h (62.1 mph) 11.8 seconds 9.3 seconds 8.4 seconds
Top speed 182 km/h (113.1 mph) 197 km/h (122.4 mph) 210 km/h (130.5 mph)
Fuel consumption 6 to 10.5 l/100 km 6.9 to 12.3 l/100 km 6.9 to 13.9 l/100 km

Driving impressions

In the May 1981 issue of Car magazine automotive journalist LJK Setright, in an article titled "Murena the marvellous", described the Murena as being "endowed with a suspension so superb that it need never go slowly". He also wrote that, although not a sprinter, when it came to sustaining high speeds on winding roads "the Murena ranks high - better than the basic Porsche 924, every bit as good as the Lancia Monte Carlo, and losing only in sheer agility to the Fiat X1/9, while it shows up the Porsche 911 as ill-balanced and inept" and went on write that this "is one of the most sweetly responsive cars that ever offered a driver a choice of how to steer through a bend." In the end he felt that the car would benefit from more power.[8]

Model year changes

Production numbers

Production of the 1981 model-year Murena 1.6 began in November of 1980, followed a few months later by the 2.2. Production of the Matra Murena ended in July 1983, when the Matra factory switched over to building the first generation of Renault Espace minivan.

Prototypes and specials

Murenas in racing

A Murena prepared for Group 4 by Matra was entered in the 1981 Monte Carlo rallye. The car was driven by Jean-Pierre Beltoise and the co-driver was singer Veronique Jannot. The car retired early.

Race-tuned Murenas prepared by Politecnic produced the following results:

3 French Rallycross championship titles
1 European Champion title (2nd division)
1 French Mountain Cup championship

Drivers included Jean-Pierre Beltoise, Max Mammers, Remy Julienne, Jean-Pierre Jaussaud, Johnny Servoz-Gavin, Jean-Claude Andruet, Philippe Wambergue.[11]

Front three-quarter view 
Rear three-quarter view 
Opposite rear three-quarter view 
Front view 
Dashboard 
Seating 
Engine bay 
Murena S at the Matra Museum 
Rear aspect of the Murena and Murena S from the Matra Museum 

Literature

References

  1. 1 2 3 4 5 "Talbot Modeljaar 1981" (PDF). MatraMurena.nl --- Alles over de Matra Murena (in Dutch). Retrieved 2017-03-31.
  2. Murena registration at Rijksdienst voor het Wegverkeer (Dutch vehicle registration office)
  3. 1 2 3 4 5 "MATRA Murena 1980-83" (PDF). www.rarefrenchsportscars.files.wordpress.com.
  4. 1 2 "Talbot Matra Murena". MatraSport.dk by Lennart Sorth. Retrieved 2006-08-20.
  5. 1 2 3 "Development of the Matra Murena cars". Rootes-Chrysler.co.uk Rootes Group, Chrysler Europe, SIMCA, and Talbot cars. Retrieved 2006-08-20.
  6. "Matra and More" (PDF). www.matrasport.dk.
  7. 1 2 "1979 Matra Murena". Retrieved 2017-03-31.
  8. Setright, LJK (May 1981). "Murena the marvellous". Car.
  9. 1 2 3 4 5 "MATRA Murena ‘Specials’ 1980-today." (PDF). rarefrenchsportscars.files.wordpress.com.
  10. "MATRA Murena Politecnic "J.P. Beltoise"". www.politecnic.com.
  11. "Les MATRA Murena Politecnic de Compétition". www.politecnic.com.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.