MXenes

In materials science, MXenes are a class of two-dimensional inorganic compounds. These materials consist of few atoms thick layers of transition metal carbides, nitrides, or carbonitrides. First described in 2011, MXenes combine metallic conductivity of transition metal carbides and hydrophilic nature because of their hydroxyl or oxygen terminated surfaces.[1][2]

Structure

Scanning electron microscope image of the MXene produced by HF-etching of Ti3AlC2

As-synthesized MXenes prepared via HF etching have an accordion-like morphology, which can be referred to as a multi-layer MXene (ML-MXene), or a few-layer MXene (FL-MXene) when there are fewer than five layers. Because the surfaces of MXenes can be terminated by functional groups, the naming convention Mn+1XnTx can be used, where T is a functional group (e.g. O, F, OH).[2]

MXenes adopt three structures, as inherited from the parent MAX phases: M2C, M3C2, and M4C3. They are produced by selectively etching out the A element from a MAX phase, which has the general formula Mn+1AXn, where M is an early transition metal, A is an element from group 13 or 14 of the periodic table, X is C and/or N, and n = 1, 2, or 3. MAX phases have a layered hexagonal structure with P63/mmc symmetry, where M layers are nearly closed packed and X atoms fill octahedral sites.[2] Therefore, Mn+1Xn layers are interleaved with the A element, which is metallically bonded to the M element.[3][4]

Double Transition Metal MXenes

MXene carbides have been synthesized that are composed of two transition metals. MXenes in this new family have the general formulas M’2M”C2 or M’2M”2C3, where M’ and M” are different transition metals. Double transition metal carbides that have been synthesized include Mo2TiC2, Mo2Ti2C3, and Cr2TiC2. In these particular MXenes, the Mo or Cr atoms are on outer edges of the MXene and these atoms control electrochemical properties of the MXenes.[5]


Preparation

MXenes are produced by selective etching of the "A" element from the MAX phase structure

Producing a MXene by etching a MAX phase occurs mainly by using strong etching solutions that contain a fluoride ion (F−) such as hydrofluoric acid (HF),[2] ammonium bifluoride (NH4HF2),[6] and a mixture of hydrochloric acid (HCl) and lithium fluoride (LiF).[7] For example, etching of Ti3AlC2 in aqueous HF at room temperature causes the A (Al) atoms to be selectively removed, and the surface of the carbide layers becomes terminated by O, OH, and/or F atoms.[8][9]

The MXene Ti4N3, currently the only nitride MXene that has been reported to have been synthesized, is prepared by a different procedure than those used for carbide MXenes. To synthesize Ti4N3, the MAX phase Ti4AlN3 is mixed with a molten eutectic fluoride salt mixture of lithium fluoride, sodium fluoride, and potassium fluoride and treated at elevated temperatures. This procedure etches out Al, yielding multilayered Ti4N3, which can further be delaminated into single and few layers by immersing the MXene in tetrabutylammonium hydroxide, followed by sonication.[10]

The following MXenes have been synthesized to date:

2-1 MXenes: Ti2C,[11] (Ti0.5,Nb0.5)2C,[11] V2C,[12] Nb2C,[12] Mo2C [13]

3-2 MXenes: Ti3C2 ,[1] Ti3CN,[11] Zr3C2[14] and Hf3C2[15]

4-3 MXenes: Ti4N3,[10] Nb4C3 ,[16] Ta4C3 [11]

Double transition metal MXenes:

2-1-2 MXenes: Mo2TiC2,[5] Cr2TiC2[5]

2-2-3 MXenes: Mo2Ti2C3[5]

Intercalation and delamination

Since MXenes are layered solids and the bonding between the layers is weak, intercalation of the guest molecules in MXenes is possible. Guest molecules include dimethyl sulfoxide (DMSO), hydrazine, and urea.[2] For example, N2H4 (hydrazine) can be intercalated into Ti3C2(OH)2 with the molecules parallel to the MXene basal planes to form a monolayer. Intercalaction increases the MXene c lattice parameter (crystal structure parameter that is directly proportional to the distance between individual MXene layers), which weakens the bonding between MX layers.[2] Ions, including Li+, Pb2+, and Al3+, can also be intercalated into MXenes, either spontaneously or when a negative potential is applied to a MXene electrode.[17]

Delamination

Ti3C2 MXene produced by HF etching has accordion-like morphology with residual forces that keep MXene layers together preventing separation into individual layers. Although those forces are quite weak, ultrasound treatment results only in very low yields of single-layer flakes. For large scale delamination, DMSO is intercalated into ML-MXene powders under constant stirring to further weaken the interlayer bonding and then delaminated with ultrasound treatment. This results in large scale layer separation and formation of the colloidal solutions of the FL-MXene. These solutions can later be filtered to prepare MXene "paper" (similar to Graphene oxide paper).[18]

MXene clay

For the case of Ti3C2Tx and Ti2CTx, etching with concentrated hydrofluoric acid leads to open, accordion-like morphology with a compact distance between layers (this is common for other MXene compositions as well). To be dispersed in suspension, the material must be pre-intercalated with something like dimethylsulfoxide. However, when etching is conducted with hydrochloric acid and LiF as a fluoride source, morphology is more compact with a larger inter-layer spacing, presumably due to amounts of intercalated water.[7] The material has been found to be ‘clay-like’: as seen in clay materials (e.g. smectite clays and kaolinite), Ti3C2Tx demonstrates the ability to expand its interlayer distance hydration and can reversibly exchange charge-balancing Group I and Group II cations.[19] Further, when hydrated, the MXene clay becomes pliable and can be molded into desired shapes, becoming a hard solid upon drying. Unlike most clays, however, MXene clay shows high electrical conductivity upon drying and is hydrophilic, being easily dispersed into single layer two-dimensional sheets in water without surfactants. Further, due to these properties, it can be quickly rolled into free-standing, additive-free electrodes for energy storage applications.

Properties

With a high electron density at the Fermi level, MXene monolayers are predicted to be metallic.[20][21][22][23][24] In MAX phases, N(EF) is mostly M 3d orbitals, and the valence states below EF are composed of two sub-bands. One, sub-band A, made of hybridized Ti 3d-Al 3p orbitals, is near EF, and another, sub-band B, -10 to -3 eV below EF which is due to hybridized Ti 3d-C 2p and Ti 3d-Al 3s orbitals. Said differently, sub-band A is the source of Ti-Al bonds, while sub-band B is the source of Ti-C bond. Removing A layers causes the Ti 3d states to be redistributed from missing Ti-Al bonds to delocalized Ti-Ti metallic bond states near the Fermi energy in Ti2, therefore N(EF) is 2.5-4.5 times higher for MXenes than MAX phases.[1] Experimentally, the predicted higher N(EF) for MXenes has not been shown to lead to higher resistivities than the corresponding MAX phases.

Only MXenes without surface terminations are predicted to be magnetic. Cr2C, Cr2N, and Ta3C2 are predicted to be ferromagnetic; Ti3C2 and Ti3N2 are predicted to be anti-ferromagnetic. None of these magnetic properties have not been demonstrated experimentally yet.[1]

Anti-Bacterial Properties

Compared to graphene oxide, which has been widely reported as an antibacterial agent, Ti3C2 MXene shows a higher antibacterial efficiency toward both Gram-negative E. coli and Gram-positive B. subtilis.[25] Colony forming unit and regrowth curves showed that more than 98% of both bacterial cells lost viability at 200 μg/mL Ti3C2 colloidal solution within 4 h of exposure.[25] Damage to the cell membrane was observed, which resulted in release of cytoplasmic materials from the bacterial cells and cell death.[25]

Water Purification Properties

One-micron-thick Ti3C2 MXene membranes demonstrated ultrafast water flux (approximately 38 L/(Bar·h·m2) and differential sieving of salts depending on both the hydration radius and charge of the ions.[26] Cations larger than the interlayer spacing of MXene don’t permeate through Ti3C2 membranes.[26] As for smaller cations, the ones with a larger charge permeate an order of magnitude slower than single-charged cations.[26]

Applications

MXenes, as conductive layered materials with tunable surface terminations, have been shown to be promising for energy storage applications (Li-ion batteries and supercapacitors), composites, photocatalysis,[27] water purification [28] and gas sensors.[29]

Lithium-ion Batteries (LIBs)

Some MXenes have been investigated experimentally thus far in LIBs (e.g. V2CTx ,[30] Nb2CTx ,[30] Ti2CTx ,[31] and Ti3C2Tx[32]). V2CTx has demonstrated the highest reversible charge storage capacity among MXenes in multi-layer form (280 mAhg−1 at 1C rate and 125 mAhg−1 at 10C rate). Nb2CTx in multi-layer form showed a stable, reversible capacity of 170 mAhg−1 at 1C rate and 110 mAhg−1 at a 10C rate. Although Ti3C2Tx shows the lowest capacity among the four MXenes in multi-layer form, it can be easily delaminated via sonication of the multi-layer powder. By virtue of higher electrochemically active and accessible surface area, delaminated Ti3C2Tx paper demonstrates a reversible capacity of 410 mAhg−1 at 1C and 110 mAhg−1 at 36C rate. As a general trend, M2X MXenes can be expected to have greater capacity than their M3X2 or M4X3 counterparts at the same applied current, since M2X MXenes have the least number of atomic layers per sheet.

In addition to the high power capabilities of MXenes, each MXene has a different active voltage window, which could allow their use as cathodes or anodes in batteries. Moreover, the experimentally measured capacity for Ti3C2Tx paper is higher than predicted from computer simulations, indicating that further investigation is required to ascertain the charge storage mechanism on MXene surfaces.[33]

Sodium-ion Batteries

MXenes also exhibit promising performances for sodium-based energy storage devices. Na+ should diffuse rapidly on MXene surfaces, which is favorable for fast charging/discharging.[34][35] Two layers of Na+ can be intercalated in between MXene layers.[36][37] As a typical example, multilayered Ti2CTx MXene as a negative electrode material showed a capacity of 175 mA h g−1 and good rate capability for electrochemical sodium-ion storage.[38] It is possible to tune the Na-ion insertion potentials of MXenes by changing the transition metal and surface functional groups.[34][39] V2CTx MXene has been successfully applied as a positive electrode material for sodium-ion storage.[40] Porous MXene-based paper electrodes have also been reported, which exhibited high volumetric capacities and stable cycling performance, demonstrating that MXenes are promising for sodium-based energy storage devices where size matters.[41]

Supercapacitors

Supercapacitor electrodes based on Ti3C2 MXene paper in aqueous solutions demonstrate excellent cyclability and the ability to store 300-400 F/cm3, which translates to three times as much energy as for activated carbon and graphene-based capacitors.[42] Ti3C2 MXene clay shows a volumetric capacitance of 900 F/cm3, a higher capacitance per unit of volume than most other materials, and does not lose any of its capacitance through more than 10,000 charge/discharge cycles.[7]

Composites

FL-Ti3C2 (the most studied MXene) nanosheets can mix intimately with polymers such as polyvinyl alcohol (PVA), forming alternating MXene-PVA layered structures. The electrical conductivities of the composites can be controlled from 4*10−4 to 220 S/cm (MXene weight content from 40% to 90%). The composites have tensile strength up to 400% stronger than pure MXene films and show better capacitance up to 500 F/cm3.[43] A method of alternative filtration for forming MXene-carbon nanomaterials composite films is also devised. These composites show better rate performance at high scan rates in supercapacitors.[44] The insertion of polymers or carbon nanomaterials between the MXene layers enables electrolyte ions to diffuse more easily through the MXenes, which is the key for their applications in flexible energy storage devices.

Porous MXenes

Porous MXenes (Ti3C2, Nb2C and V2C) have been produced via a facile chemical etching method at room temperature.[45] Porous Ti3C2 has a larger specific surface area and more open structure, and can be filtered as flexible films with, or without, the addition of carbon nanotubes (CNTs).[45] The as-fabricated p-Ti3C2/CNT films showed significantly improved lithium ion storage capabilities, with a capacity as high as 1250 mA·h·g−1 at 0.1 C, excellent cycling stability, and good rate performance.[45]

References

  1. 1 2 3 4 Naguib, M.; Kurtoglu, M.; Presser, V.; Lu, J.; Niu, J.; Heon, M.; Hultman, L.; Gogotsi, Y.; Barsoum, M.W. (2011). "Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2". Advanced Materials. 23 (37): 4248–4253. PMID 21861270. doi:10.1002/adma.201102306.
  2. 1 2 3 4 5 6 Naguib, M.; Mochalin, V.N.; Barsoum, M.W.; Gogotsi, Y. "25th Anniversary Article: MXenes: A New Family of Two-Dimensional Materials". Advanced Materials. 26 (7): 992–1005. PMID 24357390. doi:10.1002/adma.201304138.
  3. ↑ Barsoum, M.W. (2000). "The Mn+1AXn Phases: a New Class of Solids; Thermodynamically Stable Nanolaminates" (PDF). Prog. Solid State Chem. 28: 201–281.
  4. ↑ Sun, Z.; Music, D.; Ahuja, R.; Li, S.; Schneider, J.M. "Bonding and classification of nanolayered ternaray carbides". Physical Review B. 70 (9): 092102. Bibcode:2004PhRvB..70i2102S. doi:10.1103/PhysRevB.70.092102.
  5. 1 2 3 4 Anasori, B.; Xie, Y.; Beidaghi, M.; Lu, J.; Hosler, B.C.; Hultman, L.; Kent, P.R.C.; Gogotsi, Y.; Barsoum, M.W. "Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)". ACS Nano. 9 (10): 9507–9516. doi:10.1021/acsnano.5b03591.
  6. ↑ Halim, J.; Lukatskaya, M.; Cook, K.; Lu, J.; Smith, C. R.; Näslund, L.-Å.; May, S.J.; Hultman, L.; Gogotsi, Y.; Eklund, P.; Barsoum, M. W. "Transparent Conductive Two-Dimensional Titanium Carbide Epitaxial Thin Films". Chemistry of Materials. 26 (7): 2374–2381. doi:10.1021/cm500641a.
  7. 1 2 3 Ghidiu, M.; Lukatskaya, M.R.; Zhao, M.-Q.; Gogotsi, Y.; Barsoum, M.W. "Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance". Nature. 516 (7529): 78–81. Bibcode:2014Natur.516...78G. PMID 25470044. doi:10.1038/nature13970.
  8. ↑ Halim, Joseph et. al (2016). "X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)". Applied Surface Science. 362: 406–417. doi:10.1016/j.apsusc.2015.11.089.
  9. ↑ Harris, K.J. (2015). "Direct Measurement of Surface Termination Groups and Their Connectivity in the 2D MXene V2CTx Using NMR Spectroscopy". Journal of Physical Chemistry C. 119: 13713–13720. doi:10.1021/acs.jpcc.5b03038.
  10. 1 2 Urbankowski, P.; Anasori, B; Makaryan, T.; Er, D.; Kota, S.; Walsh, P.L.; Zhao, M.-Q.; Shenoy, V.B.; Barsoum, M.W.; Gogotsi, Y. "Synthesis of two-dimensional titanium nitride Ti4N3 (MXene)". Nanoscale. 8: 11385–11391. doi:10.1039/C6NR02253G.
  11. 1 2 3 4 Naguib, M.; Mashtalir, O.; Carle, J.; Presser, V.; Lu, J.; Gogotsi, Y.; Barsoum, M.W. "Two-Dimensional Transition metal Carbides". ACS Nano. 6 (2): 1322–1331. doi:10.1021/nn204153h.
  12. 1 2 Naguib, M.; Halim, J.; Lu, J.; Cook, K.M.; Hultman, L.; Gogotsi, Y.; Barsoum, M.W. "New Two-dimensional Niobium and Vanadium Carbides as Promising Materials for Li-ion Batteries". Journal of the American Chemical Society. 135 (43): 15966–15969. PMID 24144164. doi:10.1021/ja405735d.
  13. ↑ Meshkian, R.; Näslund, L-Å.; Halim, J.; Lu, J.; Barsoum, M.W.; Rosen, J. "Synthesis of two-dimensional molybdenum carbide from the gallium based atomic laminate Mo2Ga2C". Scripta Materialia. 108: 147–150. doi:10.1016/j.scriptamat.2015.07.003.
  14. ↑ Zhou, Jie. "A Two-Dimensional Zirconium Carbide by Selective Etching of Al3C3 from Nanolaminated Zr3Al3C5". Angewandte Chemie. 128: 5092–5097. doi:10.1002/ange.201510432.
  15. ↑ Zhou, Jie; Zha, Xianhu; Zhou, Xiaobing; Chen, Fanyan; gao, guoliang; Wang, Shuwei; Shen, Cai; Chen, Tao; Zhi, Chunyi (2017-04-04). "Synthesis and Electrochemical Properties of Two-Dimensional Hafnium Carbide". ACS Nano. ISSN 1936-0851. doi:10.1021/acsnano.7b00030.
  16. ↑ Ghidiu, M.; Naguib, M.; Shi, C.; Mashtalir, O.; Pan, L.M.; Zhang, B.; Yang, J.; Gogotsi, Y.; Billinge, S.J.L.; Barsoum, M.W. "Synthesis and characterization of two-dimensional Nb4C3 (MXene)". Chemical Communications. 50 (67): 9517–9520. doi:10.1039/C4CC03366C.
  17. ↑ Eames, C.; Islam, M.S. "Ion Intercalation into Two-Dimensional Transition-Metal Carbides: Global Screening for New High-Capacity Battery Materials". J. Am. Chem. Soc. 136 (46): 16270–16276. PMID 25310601. doi:10.1021/ja508154e.
  18. ↑ Mashtalir, O.; Naguib, M.; Mochalin, V.; Dall’Agnese, Y.; Heon, M.; Barsoum, M.; Gogotsi, Y. "Intercalation and delamination of layered carbides and carbonitrides". Nature Communications. 4: 1716. Bibcode:2013NatCo...4E1716M. doi:10.1038/ncomms2664.
  19. ↑ Ghidu, Michael (2016). "Ion-Exchange and Cation Solvation Reactions in Ti3C2 MXene". Chemistry of Materials. 28: 3507–3514. doi:10.1021/acs.chemmater.6b01275.
  20. ↑ Naguib, M.; Kurtoglu, M.; Presser, V.; Lu, J; Niu, J.; Heon, M.; Hultman, L.; Gogotsi, Y.; Barsoum, M.W. (2011). "Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2". Advanced Materials. 23 (37): 4248–4253. PMID 21861270. doi:10.1002/adma.201102306.
  21. ↑ Enyashin, A.N.; Ivanovskii, A.L. "Structural and Electronic Properties and Stability of MXenes Ti2C and Ti3C2 Functionalized by Methoxy Groups". J Phys. Chem. C. 117 (26): 13637–13643. doi:10.1021/jp401820b.
  22. ↑ Tang, Q.; Zhou, Z.; Shen, P. "Are MXenes promising anode materials for Li ion batteries? Computational studies on electronic properties and Li storage capability of Ti3C2 and Ti3C2X2 (X = F, OH) monolayer.". J. Am. Chem. Soc. 134 (40): 16909–16916. PMID 22989058. doi:10.1021/ja308463r.
  23. ↑ Khazaei, M.; Arai, M.; Sasaki, T.; Chung, C.-Y.; Venkataramanan, N.S.; Estili, M.; Sakka, Y. W.; Kawazoe, Y. "Novel Electronic and Magnetic Properties of Two-Dimensional Transition Metal Carbides and Nitrides". Adv. Funct. Mater. 23 (17): 2185–2192. doi:10.1002/adfm.201202502.
  24. ↑ Xie, Y.; Kent, P.R.C. "Hybrid density functional study of structural and electronic properties of functionalized Tin+1Xn (X=C, N) monolayers". Phys. Rev. B. 87 (23): 235441. Bibcode:2013PhRvB..87w5441X. arXiv:1306.6936 Freely accessible. doi:10.1103/PhysRevB.87.235441.
  25. 1 2 3 Rasool, K.; Helal, M.; Ali, A.; Ren, C. E.; Gogotsi, Y. "Antibacterial Activity of Ti3C2". ACS Nano. 10 (3): 3674–3684. doi:10.1021/acsnano.6b00181.
  26. 1 2 3 Ren, C. E.; Hatzell, K. B.; Alhabeb, M.; Ling, Z.; Mahmoud, K. A.; Gogotsi, Y. "Charge- and Size-Selective Ion Sieving Through Ti3C2Tx". Physical Chemistry Letters. 6 (20): 4026–4031. doi:10.1021/acs.jpclett.5b01895.
  27. ↑ Mashtalir, O.; Cook, K. M.; Mochalin, V. N.; Crowe, M.; Barsoum, M. W.; Gogotsi, Y. "Dye adsorption and decomposition on two-dimensional titanium carbide in aqueous media". J. Mater. Chem. A. 2 (35): 14334–14338. doi:10.1039/C4TA02638A.
  28. ↑ Ren, Chang; Hatzell, Kelsey; Alhabeb, Mohamed; Ling, Zheng; Mahmoud, Khaled; Gogotsi, Yury (September 22, 2015). "Charge- and Size-Selective Ion Sieving Through Ti3C2Tx MXene Membranes". J. Phys. Chem. Lett. 6 (20): 4026–4031. doi:10.1021/acs.jpclett.5b01895.
  29. ↑ Chen, J.; Chen, K.; Tong, D.; Huang, Y.; Zhang, J.; Xue, J.; Huang, Q.; Chen, T. "CO and temperature dual responsive "Smart" MXene phases". Chem. Commun. 51 (2): 314–317. doi:10.1039/C4CC07220K.
  30. 1 2 Naguib, M.; Halim, J.; Lu, J.; Cook, K.M.; Hultman, L.; Gogotsi, Y.; Barsoum, M.W. "New Two-Dimensional Niobium and Vanadium Carbides as Promising Materials for Li-Ion Batteries". J. Am. Chem. Soc. 135 (43): 15966–15969. PMID 24144164. doi:10.1021/ja405735d.
  31. ↑ Naguib, M.; Come, J.; Dyatkin, B.; Presser, V.; Taberna, P.-L.; Simon, P.; Barsoum, M.W.; Gogotsi, Y. "MXene: a promising transition metal carbide anode for lithium-ion batteries". Electrochemistry Communications. 16 (1): 61–64. doi:10.1016/j.elecom.2012.01.002.
  32. ↑ Mashtalir, O.; Naguib, M.; Dall'Agnese, Y.; Heon, M.; Barsoum, M.W.; Gogotsi, Y. "Intercalation and delamination of layered carbides and carbonitrides". Nature Communications. 4: 1716. Bibcode:2013NatCo...4E1716M. doi:10.1038/ncomms2664.
  33. ↑ Xie, Yu; Naguib, M.; Mochalin, V.N.; Barsoum, M.W.; Gogotsi, Y.; Yu, X.; Nam, K.-W.; Yang, X.-Q.; Kolesnikov, A.I.; Kent, P.R.C. "Role of Surface Structure on Li-Ion Energy Storage Capacity of Two-Dimensional Transition-Metal Carbides". Journal of the American Chemical Society. 136 (17): 6385–6394. PMID 24678996. doi:10.1021/ja501520b.
  34. 1 2 Yang, E.; Ji, H.; Kim, J.; Jung, Y. "Exploring the possibilities of two-dimensional transition metal carbides as anode materials for sodium batteries". Phys. Chem. Chem. Phys. 17: 5000–5005. doi:10.1039/C4CP05140H.
  35. ↑ Er, D.; Li, J.; Naguib, M.; Gogotsi, Y.; Shenoy, V.B. "Ti3C2 MXene as a High Capacity Electrode Material for Metal (Li, Na, K, Ca) Ion Batteries". ACS Appl. Mater. Interfaces. 6: 11173–11179. doi:10.1021/am501144q.
  36. ↑ Xie, Y.; Dall'Agnese, Y.; Naguib, M.; Gogotsi, Y.; Barsoum, M.W.; Zhuang, H.L.; Kent, P.R.C. "Prediction and Characterization of MXene Nanosheet Anodes for Non-Lithium-Ion Batteries". ACS Nano. 8: 9606–9615. doi:10.1021/nn503921j.
  37. ↑ Wang, X.; Shen, X.; Gao, Y.; Wang, Z.; Yu, R.; Chen, L. "Atomic-Scale Recognition of Surface Structure and Intercalation Mechanism of Ti3C2X". J. Am. Chem. Soc. 137: 2715–2721. doi:10.1021/ja512820k.
  38. ↑ Wang, X.; Shen, X.; Gao, Y.; Wang, Z.; Yu, R.; Chen, L. "Pseudocapacitance of MXene nanosheets for high-power sodium-ion hybrid capacitors". Nat. Commun. 6: 6544. doi:10.1038/ncomms7544.
  39. ↑ Eames, C.; Islam, M.S. "Ion Intercalation into Two-Dimensional Transition-Metal Carbides: Global Screening for New High-Capacity Battery Materials". J. Am. Chem. Soc. 136: 16270–16276. PMID 25310601. doi:10.1021/ja508154e.
  40. ↑ Dall'Agnese, Y.; Taberna, P.-L.; Gogotsi, Y.; Simon, P. "Two-Dimensional Vanadium Carbide (MXene) as Positive Electrode for Sodium-Ion Capacitors". J. Phys. Chem. Lett. 6: 2306–2309. doi:10.1021/acs.jpclett.5b00868.
  41. ↑ Xie, X.; Zhao, M.-Q.; Anasori, B.; Maleski, K.; Ren, E.; Li, C.E.; Li, J.; Byles, B.W.; Pomerantseva, E.; Wang, G.; Gogotsi, Y. "Porous heterostructured MXene/carbon nanotube composite paper with high volumetric capacity for sodium-based energy storage devices". Nano Energy. 26: 513–523. doi:10.1016/j.nanoen.2016.06.005.
  42. ↑ Lukatskaya, M. R.; Mashtalir, O.; Ren, C. E.; Dall'Agnese, Y.; Rozier, P.; Taberna, P. L.; Naguib, M.; Simon, P.; Barsoum, M. W.; Gogotsi, Y. "Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide". Science. 341 (6153): 1502–1505. Bibcode:2013Sci...341.1502L. PMID 24072919. doi:10.1126/science.1241488.
  43. ↑ Ling, Z.; Ren, C. E.; Zhao, M.-Q.; Yang, J.; Giammarco, J. M.; Qiu, J.; Barsoum, M. W.; Gogotsi, Y. "Flexible and conductive MXene films and nanocomposites with high capacitance". Proceedings of the National Academy of Sciences. 111 (47): 16676–16681. Bibcode:2014PNAS..11116676L. PMC 4250111 Freely accessible. PMID 25389310. doi:10.1073/pnas.1414215111.
  44. ↑ Zhao, M.-Q.; Ren, C. E.; Ling, Z.; Lukatskaya, M. R.; Zhang, C.; Van Aken, K. L.; Barsoum, M. W.; Gogotsi, Y. "Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance". Advanced Materials. 27 (2): 339–345. doi:10.1002/adma.201404140.
  45. 1 2 3 Ren, C. E.; Zhao, M.-Q.; Makaryan, T.; Halim, J.; Boota, M.; Kota, S.; Anasori, B.; Barsoum, M.W.; Gogotsi, Y. "Porous Two-Dimensional Transition Metal Carbide (MXene) Flakes for High-Performance Li-Ion Storage". ChemElectroChem. 3 (5): 689–693. doi:10.1002/celc.201600059.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.