M1917 bayonet

M1917 bayonet

U.S. military bayonets of the Great War (World War I). Shown is the U.S. Bayonet M1905 affixed to the 1903 Springfield Rifle and the U.S. Bayonet M1917 affixed to the Model 12 Winchester Trenchgun (12 gauge pump shotgun).
Type Bayonet
Service history
Used by United States
United Kingdom
Wars World War I
Banana Wars
World War II
Korean War
Vietnam War
Production history
Manufacturer Remington Arms
Winchester Arms
Eddystone Arms
General Cutlery
Canadian Arsenals Limited
Produced 1910s–1930s, 1960s
No. built ~2,000,000
Specifications
Weight 1 lb. 2 oz. (511 g)
Scabbard/sheath M1917 scabbard

The M1917 bayonet was designed to be used with the US M1917 Enfield .30 caliber rifle, as well as with the seven different U.S. trench shotguns. The blade was 16 inches (40.6 cm) long. It will not fit the M1903 .30 caliber (Springfield) or the M1 .30 caliber (Garand) US service rifles as they have different bayonet ring (barrel) and attachment stud dimensions.

History

The M1917 bayonet was used first during World War I by American soldiers on the Western Front. A sword bayonet design, the M1917 bayonet design was based on the British P1907 bayonet, which incorporated a long 17-inch blade. While designed primarily for the M1917 rifle the bayonet was fitted for use on all the "trench" shotguns at the time.

The M1917 was used frequently during the several different Banana Wars.

The U.S. continued to use the Word War I-made M1917 bayonets during World War II because of large stockpiles left over. The new Trench Guns being procured and issued were still designed to use the old M1917 bayonet.

The bayonet was again called on during the Korean War for issue with the various Trench guns still in service.

In a strange twist of fate, in 1966 procurement orders were let for brand new production M1917 bayonets. The contracts were issued to General Cutlery of Fremont, Ohio and Canadian Arsenals Ltd., the old Long Branch Arsenal of Quebec, Canada. Stockpiles had finally run out, and new Winchester 1200 trench shotguns were being issued. These were used in limited quantities during the Vietnam War.

It was not until towards the end of the Vietnam war that new Military shotguns were designed to use the newer knife bayonets. Such as the Stevens Model 77E with the M5 Bayonet, or the United States Marine Corps "Model 870 Mark 1" shotgun with the M7 bayonet

Weapons the M1917 Bayonet was used with

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.