Low-background steel

A body counting room at the Rocky Flats Plant in Denver, Colorado made entirely from pre-World War II steel. After the Rocky Flats plant was decommissioned, this room was donated and moved to the Southern Urals Biophysics Institute in Ozërsk, Chelyabinskaya Oblast', Russian Federation, by the U.S. Department of Energy under the auspices of the Joint Coordinating Committee for Radiation Effects Research (JCCRER).^[1] It is in use today for in vivo radioactivity measurements of workers at the Mayak Production Association.^[2]

Low-background steel is any steel produced prior to the detonation of the first atomic bombs in the 1940s and 1950s. With the Trinity test and the Atomic bombing of Hiroshima and Nagasaki in 1945, and then subsequent nuclear weapons testing during the early years of the Cold War, background radiation levels increased across the world. Modern steel is contaminated with radionuclides because its production used atmospheric air. Low background steel is so called because it does not suffer from such nuclear contamination. This steel is used in devices that require the highest sensitivity for detecting radionuclides.

The primary source of low-background steel is ships that were constructed before the Trinity test, most famously the scuttled German WWI battleships in Scapa Flow.^[3]

Radionuclide contamination

From 1856 until the mid 20th century, steel was produced in the Bessemer process where air was forced into Bessemer converters converting the pig iron into steel. By the mid-20th century, many steelworks had switched to the BOS process which uses pure oxygen instead of air. However as both processes use atmospheric gas, they are susceptible to contamination from airborne particulates. Present-day air carries radionuclides, such as cobalt-60, which are deposited into the steel giving it a weak radioactive signature.^[4]

World anthropogenic background radiation levels peaked at 0.15 mSv/yr above natural levels in 1963, the year that the Partial Nuclear Test Ban Treaty was enacted. Since then, anthropogenic background radiation has decreased exponentially to 0.005 mSv/yr above natural levels.^[5]

However, cobalt-60 still contaminates modern steel because it has been recycled through the scrap metal supply chain.^[6]

Necessity

Devices that require low-background steel include:

• Geiger counters
• Medical apparatus: whole body counting and lung counters
• Scientific equipment: photonics
• Aeronautical and space sensors

As these devices detect radiation emitted from radioactive materials, they require an extremely low radiation environment for optimal sensitivity. Low background counting chambers are made from low-background steel with extremely heavy radiation shielding. They are used to detect the minutest nuclear emissions.^[7]

References