Laddermill

A Laddermill is a hypothetical airborne wind turbine consisting of a long string or loop of power kites. The loop or string of kites (the "ladder") would be launched in the air by the lifting force of the kites, until it is fully unrolled, and the top reaches a height determined by designers and operators; some designers have considered heights of about 30,000 feet (9144 meters), but the concept is not height-dependent. The laddermill method may use one endless loop, two endless loops, or more such loops.

Introduction

As of 2008, wind power is one of the fastest-growing power sources in the world. The bulk of this growth has been in the form of conventional, three-bladed, horizontal-axis wind turbines, with vertical axis wind turbines accounting for a small remainder. Converting the kinetic energy of the wind into useful electricity requires converting the linear horizontal motion of wind into the rotational motion of a shaft in an electrical generator. In every case this requires some method of maintaining a static force against the motion of the wind, to keep the wind-collection apparatus from simply blowing away. Conventional wind turbines accomplish this by mounting rotors rigidly on towers, relatively close to the ground. This arrangement works reliably, but is relatively expensive, requires large amounts of structural material, and cannot tap the much stronger winds often present at higher altitudes.

Humans have flown kites for thousands of years. Kites can readily fly to great heights. Over the years this has led several inventors to propose various schemes for using kites to convert the linear horizontal motion of wind into rotational motion which can drive an electrical generator. As of 2008, few such schemes have even reached the working prototype stage, and none have reached commercial operation. However, progress in enabling technologies such as the computer control of power kites may someday lead to practical airborne wind turbines of the aerodynamic variety.

In a 2007 "road map" report on renewable energy adopted by the European Parliament, laddermill technology was listed among various "promising and challenging" new energy sources into which revenue from emissions trading could be reinvested.

Operating modes

There are currently two operating modes considered:

• The kites pull up the long string on which they are tethered, and the resulting energy is then used to drive an electric generator. When the end of the string is reached the pull force of the kites is reduced by changing the angle of attack of the kites "wing shape", and the string is then rewound with the electric generator acting as a motor, or by other means. If the string is reduced to its minimum length the next energy generating cycle is started by restoring the angle of attack of the kites to maximum lift.
• Kites on one side of a wire loop generate lift while the ones on the other side do not because the angle of attack of the kites "wing shape" changes when the kite passes the top of the loop. So the kites pull up only one end of an endless loop, causing the loop to start to rotate, and the resulting released energy is then used to drive an electric generator.

A "rotating loop" "LadderMill" project is designed and developed by the Dutch ex-astronaut and physicist Wubbo Ockels.

As quoted from his website:

The LadderMill is the response to the challenge for exploiting the gigantic energy source contained in the airspace up to high altitudes of 10 km. The concept has been developed with the aim to convert wind energy at altitude in electricity on the ground in an environmental and cost effective manner.

Timeline

• 1977 April 3, 1977, invention declared. On September 21, 1979, Douglas Selsam notarized his kite-lifted endless chain of airfoils HAWP system, generic type that would later show in Dutch astronaut Wubbo Ockels' ^[1] device called LadderMill described in a patent of 1997. Douglas Selsam conceived his Auto-oriented Wind Harnessing Buoyant Aerial Tramway on April 3, 1977. On the Selsam notarized disclosure of invention was placed a date of Sept. 20, while the notary placed the final signing on Sept. 21, 1979. notes and drawings.^[2]

References

External links

• The laddermill website of Wubbo Ockels.
• Website of the Delft University of Technology explaining the principle of the LadderMill project.
• paper "Design and Construction of a 4 kW Groundstation for the Laddermill".
• Giant kites to tap power of the high wind Alok Jha, The Guardian, Sunday August 3, 2008